CAT Electronic Technician:

Caterpillar Electronic Technician (Cat ET) is diagnostic software required to communicate, diagnose and service electronically controlled Caterpillar engines and machines. When connected to an Electronic Control Module (ECM), a technician has the ability to diagnose existing and potential problems, configure the product, and obtain data for analysis.

Cat ET features:

Cat ET
  •  Displays parameter status
  •  Displays active diagnostics
  •  Clear and view logged diagnostics
  •  Performs diagnostic tests
  •  Print reports and diagnostic results
  •  Perform calibrations
  •  Displays current totals information, i.e. fuel consumption, operating hours, etc.
  •  Integration to help files
  •  Creates engine warranty reports

Caterpillar mails three software updates to each user annually (Version A, B, C). Each computer requires a software license. Software license expires annually. A Cat Communications Adapter is required to connect a computer to the equipment. 


If you would like to purchase CAT ET, complete the web form below. If you have questions contact Susie Frazier at 480.633.4320.

*IMPORTANT: CAT ET IS ONLY AVAILABLE FROM EMPIRE CLIENTS LOCATED IN AZ OR CA. 

 

CAT ET REQUEST FORM FOR AZ/CA CLIENTS

 * Company Name:  
    Empire Account #  
    Purchase Order #  
 * Contact Name  
 * Email:  
 * Address:  
 * City:  
 * State:  
 * Zip Code:  
 * Contact Number:  
   
 Purchase Items: NEXG5007)

 (TEPS dealers only NEXG5009)

 (For first time install JERD3003)

 (For machine diagnosis 466-6258)

Eligible Client:  


      

 

Cat ET 2014A will be the LAST version supported under Windows XP.  READ ANNOUNCEMENT HERE

PC, Communication hardware, and cable Requirements

To run the service tool, the following PC, communication hardware, and cable requirements must be met.

NOTE: The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the service tool.

 
Recommended Configurations:

  •  PC containing a 2.0 GHz dual-core processor
  •  3 GB RAM
  •  3 GB of available hard disk drive
  •  DVD ROM drive
  •  15.4 inch XGA Screen (1280x1024 compatible)
  •  Microsoft® Windows™ 7 Professional or Windows 8 Professional (Note: Windows 8 RT is not supported)
  •  RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
  •  USB 1.1 or 2.0 port (for use with Comm Adapter 3)
  •  Ethernet RJ45 connector
  •  Built in pointing device or mouse
  •  For security purposes, Microsoft® Internet Explorer version 9 or newer is recommended. Note: The most recent version of Microsoft® Internet Explorer may not be validated to work with the service tool.

 

Minimum Configurations: 

  •  PC containing a Pentium 2 GHz processor or greater 
  •  1GB RAM 
  •  500MB of available hard disk drive 
  •  CD-ROM drive 
  •  Super VGA monitor or display (1024x768) 
  •  Microsoft® Windows™ 7 Professional or Windows 8 Professional (Note: Windows 8 RT is not supported) 
  •  RS232 port with 16550AF UART or compatible (for use with Comm Adapter II) 
  •  USB 1.1 or 2.0 port (for use with Comm Adapter 3) 
  •  Ethernet RJ45 connector 
  •  Built in pointing device or mouse 
  •  For security purposes, Microsoft® Internet Explorer version 9 or newer is recommended. Note: The most recent version of Microsoft® Internet Explorer may not be validated to work with the service tool.

 

NOTE: If the entire screen is not visible, click the maximize button to fill the screen.

 

Used Equipment

2011 CS56 - $83,260.00

View This Item »

2007 735 WT - $346,357.92

View This Item »

1995 793B - $2,695,000.16

View This Item »

2010 D10T - $864,999.64

View This Item »

2000 992G - $638,999.80

View This Item »
Featured Item Prev Next

Live Chat Support Software

  • EREFOOTER1
  • SITECHFOOTER1
  • allenfooter1
  • BPWFOOTER1
  • topsfooter1
  • tntfooter1
  • agfooter1