Performance Hammers

H110 S Hydraulic Hammer

Impact Energy Class

2,000 ft·lbf

Blows per Minute

93 HP


Minimum Operating Weight

2,095 lb


Work Tools

Detailed Equipment Specifications

  • Impact Energy Class

    2,000 ft·lbf

    2,712 J

  • Blows per Minute

    93.0 in

    93.0 mm


  • Minimum Operating Weight

    2,095 lb

    950 kg

  • Maximum Operating Weight

    2,381 lb

    1,080 kg

  • Minimum Rated Flow

    16 gal/min

    60 l/min

  • Maximum Rated Flow

    32 gal/min

    120 l/min

  • Minimum Operating Pressure

    2,176 psi

    15,000 kPa

  • Maximum Operating Pressure

    2,321 psi

    16,000 kPa

  • Tool Shaft Diameter

    3.92 in

    99.5 mm

  • Minimum Carrier Weight

    24,300 lb

    11 t

  • Maximum Carrier Weight

    39,700 lb

    18 t

Increase Production

  • Hammer hits with consistent power, delivering constant production.
  • Operation cycle is more efficient – less waste in internal heat, more power delivered to the tool.
  • Piston and tool are matched in diameter and mass, greatly increasing efficiency in power transmission.
  • Blow frequency, hydraulic pressure and impact energy have been tuned to produce the highest possible work rates on Cat machines.

Lower Maintance Costs

  • No need for constant checking of the gas charge.
  • Design keeps gas pressure steady through the duration of the annual service interval.
  • All daily checks and routine service can be performed with the hammer attached to the machine.
  • Spend more time working and less time on service.
  • Greasing can be performed quickly from one standing-height grease point.
  • Service the lower bushing in the field using simple hand tools.

  • Lower bushing is rotatable – more service life lower parts cost.

  • Optional on-board autolube provides continual greasing as the hammer runs, protecting your investment.
  • Available for extreme environments, the optional wear package protects the hammer housing from damage.
  • Easy to Operate

  • Auto shut off prevents blank firing, the leading cause of user-induced damage to hammers.
  • On a Next Gen Cat Excavator, hammers are protected by Auto-Stop, preventing damage from over-hammering in a single spot.
  • This feature helps prevent damage to your machine and premature damage to your hammer, even with inexperienced operators
  • Performance Hammers lead in both operator comfort and machine protection.
  • The buffering system qualitatively dampens vibration to the machine due to proprietary buffering material.
  • Can be configured for joystick or foot pedal control to suit your operating preference.
  • Next Level Technology

    • All models include Product Link technology standard, you can locate the hammer via the Cat App on your phone.
    • When paired with a Next Gen Cat excavator, the hammer is automatically recognized and configured
    • Cat hammer dimensions are included in Cat E-Fence technology – protects the cab, and keeps the hammer in safe areas on the job site.
    • Hammer pressure and flow controls can be monitored and configured via the in-cab monitor – manually or automatically.

    Similar Attachments


    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity