Wheel Saws

SW360B, 203 mm (8 in) Wheel Saw

Maximum Cutting Depth

24 in

Wheel Width

8 in


3,075 lb


Cat® Wheel Saws are designed for high performance trench cutting on a variety of hard or compact surfaces such as asphalt, reinforced concrete, and rocky or frozen ground.

Detailed Equipment Specifications

  • Maximum Cutting Depth

    24 in

    600 mm

  • Wheel Width

    8 in

    200 mm

  • Weight

    3,075 lb

    1,395 kg

  • Overall Width

    73 in

    1,850 mm

  • Overall Height

    70 in

    1,765 mm

  • Length

    93 in

    2,365 mm

  • Required Hydraulics

    93.0 in

    93.0 mm

    High Flow XPS

  • Required Hydraulic Flow

    33 gal/min

    125 l/min

  • Optimal Hydraulic Pressure

    3,335 psi

    230 bar

  • Motor Displacement

    106 in³/rev

    1,686 cm³/rev

  • Wheel Torque at Maximum Pressure

    5,538 ft-lb

    7,509 N·m

  • Wheel Speed at Maximum Flow

    93.0 in

    93.0 mm

    74 rpm

  • Bit Speed at Maximum Flow

    1,180 ft/min

    360 m/min

  • Conical Bits - Per Wheel

    93.0 in

    93.0 mm


  • Standard Bit Type

    93.0 in

    93.0 mm


  • Optional Bit Type

    93.0 in

    93.0 mm


  • Side Shift Travel

    22 in

    550 mm

  • Trench Cleaning Device

    93.0 in

    93.0 mm


  • Drive Method

    93.0 in

    93.0 mm

    Piston motor/Planetary


Ideal for asphalt patch cutting, road expansion join cuts, and utility trenching.

Direct Drive System

Direct drive system features a hydraulic piston pump motor to ensure maximum cutting rate and wheel torque for optimal production performance and efficiency.

Hydraulic Side-Shift and Depth Control

Hydraulic side-shift and depth control is standard on all models and is controlled from the operator's compartment. Hydraulic side-shift allows wheel positioning from center to the far right of center. This allows for cutting close to curbs, walls and other obstructions, and minimizes need to reposition the machine.

Trench Cleaning Device

The trench cleaning device is hydraulically operated from the operator's compartment. The blade can be controlled up and down to remove spoil and ensure a clean trench.

Deflector Plates

Deflector plates remove spoil from the machine's path for smooth operation. Spoil can be discharged left, right, or on both sides of the wheel saw with installation of included blanking plates.

Max Pro Pressure Gauge

Max Pro Pressure Gauge provides operator feedback to adjust speed for maximum productivity in changing material loads. Gauge displays planer performance in real-time conditions and is visible from the cab. Standard on XHP models.


Concrete bits are standard on all models. Optional all purpose conical bits are available for all Cat Wheel Saws for tarmac and asphalt applications. Extreme life bits are available for extreme duty Cat Wheel Saw applications.

Self Standing

Self standing frame design improves connection and parking.

Optional Guide Bar

Optional guide bar allows operator to position wheel saw for a straight cut and aids in visibility.


  • Machines built tough and ready to run in rugged applications

  • Trusted advisors to help you find and maximize your equipment

  • Wide inventory of rental equipment that lets you try before you buy

  • Full service and support to ensure performance and longevity