TRS10 Tiltrotator

Machine Class

93 HP

11-16 ton Excavators


937 lb

Interface Options: Top-Bottom

93 HP

S60 / S60


Cat® Tiltrotators help you get the job done faster with the quality you expect from Cat products. Integrated to your excavator, Tiltrotators are productive, easy-to-use, and add value to your operation. Tiltrotators are a versatile solution providing enhancements to your operation.

Detailed Equipment Specifications

  • Machine Class

    93.0 in

    93.0 mm

    11-16 ton Excavators

  • Weight

    937 lb

    425 kg

  • Interface Options: Top-Bottom

    93.0 in

    93.0 mm

    S60 / S60

  • Overall Height

    41.14 in

    1,045 mm

  • Length

    27.76 in

    705 mm

  • Overall Width

    28.54 in

    725 mm

  • Rotation Speed

    93.0 in

    93.0 mm

    7 seconds, per 1 full rotation

  • Tilt Angle Range +/-

    93.0 in

    93.0 mm

    40° Left/Right

  • Maximum Bucket Capacity

    1.05 yd³


  • Maximum Bucket Width

    63 in

    1,600 mm

Seamless Integration

Tiltrotators connect to the machine’s HP2 circuit leaving the HP1 circuit for an additional attachment, ensuring smooth hydraulic flow to both Display function integrates into the machine’s monitor Positioning system connects to Cat GRADE with 3D

Up to 13% More Productivity

Controls allow for simultaneous tilt, rotation, and machine movement Short height maintains consistent breakout force for digging Hydraulic quick connect changes attachments in seconds Do more work with less attachments and machines

Easy Operation

Machine joysticks include Tiltrotator controls, preventing delay between operator command and action Oil-filled gear box keeps gears constantly lubricated, extending the life of the rotor Lubrication System has one grease point, which can be attached to the machine’s greasing Innovative Control System has four unique operator settings

Enhanced Versatility

40⁰ left and right tilt, plus 360° rotation adds capability to fixed attachments Use grapple module without removing bottom attachment Mixed configurations enable use of multiple attachment interfaces Innovative Control system has settings for four unique operators

Stay Safe

Curl to Unlock technology verifies the operator has the coupler or tiltrotator curled in the correct position before it is allowed to unlock during the process of switching attachments. This helps keep your attachments secure while working and connected to the coupler during the uncoupling process. Grapple module is faster and safer than people manually moving heavy objects Operator stays in cab while switching attachments Hydraulic quick connect does not require manual hose change Double acting tilt cylinders have built-in load holding valves in the event of pressure loss

Configuration Options

Meet your usage and attachment interface needs with a variety of top and bottom configuration options for your tiltrotator depending on your preferred coupler system. Tiltrotators with a pin-on top are ideal when the tiltrotator is used regularly and compatible attachments are switched out on the bottom side. Options with a specific coupler interface on top are used with a standard coupler so the tiltrotator can be detached and larger or higher flow requirement attachments can be used with the standard coupler. Specific coupler interfaces may require attachments or brackets for attachments with that interface. The following are the current available interfaces for tiltrotators:

    Pin-on CW Dedicated S Type Hydraulic Connecting S Type

Similar Attachments


  • Machines built tough and ready to run in rugged applications

  • Trusted advisors to help you find and maximize your equipment

  • Wide inventory of rental equipment that lets you try before you buy

  • Full service and support to ensure performance and longevity