TRS8 Tiltrotator

Machine Class

93 HP

7-9 Ton Mini Excavators


683.4 lb

Interface Options: Top-Bottom

93 HP

Pin-On / S-50


Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to more easily reach along ditch edges.

Detailed Equipment Specifications

  • Machine Class

    93.0 in

    93.0 mm

    7-9 Ton Mini Excavators

  • Weight

    683.4 lb

    310 kg

  • Interface Options: Top-Bottom

    93.0 in

    93.0 mm

    Pin-On / S-50

  • Overall Height

    37.3 in

    947 mm

  • Length

    25.2 in

    640 mm

  • Overall Width

    26.7 in

    678 mm

  • Rotation Speed

    93.0 in

    93.0 mm

    7 Seconds per 1 Full Rotation

  • Tilt Angle Range +/-

    93.0 in

    93.0 mm

    40 degrees left/right

  • Maximum Bucket Capacity

    17.7 ft³

    500 l

  • Maximum Bucket Width

    59.1 in

    1,500 mm

  • Optimal Hydraulic Flow

    93.0 in

    93.0 mm

    45-75 L/min (12-20 gpm)

  • Maximum Operating Pressure

    3,626 psi

    25,000 kPa

  • Required Hydraulics

    93.0 in

    93.0 mm

    1st Auxiliary

  • Tilting Torque

    19,545 lb/ft

    26,499.5 N·m

  • Turning Torque

    4,867.9 lb/ft

    6,600 N·m

Complete 360 Degree Rotation

Provides optimal control of your work tools to provide greater flexibility.

Integrated Central Lubrication System

A single point of entry for grease allows the entire unit to be greased quickly and easily.

TRS8 Positioning System

Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.

Oil Filled Gearbox

A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.

Heavy Duty Worm Gear

Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.

Double Acting Cylinders with Load Hold Valves

Valves sustain holding pressures and prevent cylinders movement under load constraints required by directives.

Visual Verification Indicator

The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.

Locking Control System (LCS)

LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.

Compatibility Note

Only compatible with the following Next Gen machines and serial numbers: 307.5 - S/N GW7 1 & Up 308 - S/N GG8 1 & Up 308 - S/N GW8 1 & Up 308.5 - S/N GZ8 1 & Up 309 - S/N GG9 1 & Up 309 - S/N GW9 1 & Up 310 - S/N GWT 1 & Up

Similar Attachments


  • Machines built tough and ready to run in rugged applications

  • Trusted advisors to help you find and maximize your equipment

  • Wide inventory of rental equipment that lets you try before you buy

  • Full service and support to ensure performance and longevity