THIS IS MY SELECT
Small Dozers
D1 Dozer
Engine Model
93.0 hp
Cat C3.6
Power - Net
80 HP
Operating Weight
17,855 lb
THIS IS MY SELECT
backhoe loader
D1 Dozer
Engine Model
93.0 hp
Cat C3.6
Power - Net
80 HP
Operating Weight
17,855 lb
Specifications
The new Cat ® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
-
Engine Model
93.0 in
93.0 mm
Cat C3.6
Power - Net
80 HP
59.7 kW
Displacement
220 in³
3.6 l
Net Power - 2,200 rpm - SAE J1349
80 HP
59.7 kW
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
80 HP
59.7 kW
Power Train
93.0 in
93.0 mm
Hydrostatic
Note (1)
93.0 in
93.0 mm
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)
93.0 in
93.0 mm
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
-
Air Conditioning
93.0 in
93.0 mm
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
BLADE: Blade Capacity (SAE) - LGP
2.17 yd³
1.99 m³
BLADE: Blade Lift Height - LGP
28.7 in
730 mm
BLADE: Maximum Tilt - LGP
17.2 in
438 mm
BLADE: Blade Width - LGP
124 in
3,149 mm
Ground Clearance - LGP
13 in
332 mm
BLADE: Blade Width at Maximum Angle - LGP
113.1 in
2,874 mm
BLADE: Digging Depth - LGP
23 in
583 mm
Track Gauge - LGP
67.9 in
1,725 mm
Ground Clearance - LGP, 762 mm (30 in)
13 in
332 mm
BLADE: Blade Height - LGP
33.8 in
860 mm
Overall Length - With Blade - LGP, 762 mm (30 in)
167.8 in
4,262 mm
Track Gauge - LGP, 762 mm (30 in)
73 in
1,860 mm
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
93.0 in
93.0 mm
52° to 58°
BLADE: Maximum Angle (either side) - LGP
93.0 in
93.0 mm
25°
Overall Length - With Blade - LGP
167.8 in
4,262 mm
BLADE: Blade Width at Maximum Angle - Standard
95.2 in
2,417 mm
BLADE: Digging Depth - Standard
23.2 in
589 mm
BLADE: Blade Width - Standard
104.2 in
2,646 mm
BLADE: Blade Lift Height - Standard
28.7 in
730 mm
Ground Clearance - Standard
13 in
332 mm
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
93.0 in
93.0 mm
52° to 58°
BLADE: Maximum Angle (either side) - Standard
93.0 in
93.0 mm
25°
BLADE: Maximum Tilt - Standard
14.5 in
368 mm
BLADE: Blade Capacity (SAE) - Standard
1.99 yd³
1.52 m³
Note
93.0 in
93.0 mm
*Abrasion Undercarriage
Track Gauge - Standard
58.9 in
1,495 mm
BLADE: Blade Height - Standard
35.8 in
910 mm
Overall Length - With Blade - Standard
168 in
4,273 mm
Note
93.0 in
93.0 mm
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
129.6 in
3,291 mm
Width of Dozer (standard shoes, no blade) - Standard
74.8 in
1,900 mm
Length of Basic Dozer (without blade) - Standard
129.6 in
3,291 mm
Length of Basic Dozer (without blade) - LGP
129.6 in
3,291 mm
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
94.9 in
2,411 mm
Dozer Height - LGP
108.9 in
2,765 mm
Width of Dozer (standard shoes, no blade) - LGP
92.9 in
2,360 mm
Dozer Height - LGP, 762 mm (30 in)
108.9 in
2,765 mm
Dozer Height - Standard
108.9 in
2,765 mm
-
Operating Weight
17,855 lb
8,099 kg
Operating Weight - LGP
18,839 lb
8,545 kg
Note (1)
93.0 in
93.0 mm
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in
19,295 lb
8,752 kg
Note (2)
93.0 in
93.0 mm
For machine with ripper, add 554 kg (1,222 lb).
-
FOPS
93.0 in
93.0 mm
ISO 3449:2005 Level II
ROPS
93.0 in
93.0 mm
ISO 3471:2008
-
Drive Pumps
93.0 in
93.0 mm
1
Maximum Travel Speed - Reverse
6.2 mile/h
10 km/h
Relief Valve Settings
7,033 psi
48,500 kPa
Maximum Travel Speed - Forward
5.6 mile/h
9 km/h
Track Motors
93.0 in
93.0 mm
2
-
Length - Track on Ground - LGP, 762 mm (30 in)
89 in
2,248 mm
Length - Track on Ground - LGP
89 in
2,248 mm
Track Gauge - LGP
68 in
1,725 mm
Shoe Width - LGP, 762 mm (30 in)
30 in
762 mm
Track Gauge - LGP, 762 mm (30 in)
73 in
1,860 mm
Shoe Width - LGP
25 in
635 mm
Track Gauge
59 in
1,495 mm
Shoe Width - Standard
16 in
406 mm
Ground Pressure - LGP
4.3 psi
29.9 kPa
Ground Pressure - LGP, 762 mm (30 in)
3.7 psi
25.5 kPa
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
93.0 in
93.0 mm
43
Number of Rollers - Each Side
93.0 in
93.0 mm
6
Length of Track on Ground
89 in
2,248 mm
Number of Shoes - Each Side - Abrasion Undercarriage
93.0 in
93.0 mm
38
Ground Pressure
6.45 psi
44.5 kPa
-
Final Drive - Each - LGP
2.6 gal (US)
10 l
Cooling System
4.2 gal (US)
19 l
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)
19 l
Transmission - Hydraulic Tank
23.8 gal (US)
90 l
Crankcase - With Filter
2.8 gal (US)
10.5 l
Fuel Tank
51.5 gal (US)
195 l
Final Drives - Each Side
2.6 gal (US)
10 l
-
Pump Output
17.2 gal/min
65 l/min
Relief Valve Settings
2,988 psi
20,600 kPa
-
Type
93.0 in
93.0 mm
Parallelogram
Number of Shanks
93.0 in
93.0 mm
3
Height
6.5 in
165 mm
Weight
1,222 lb
554 kg
Maximum Ground Clearance Under Tip
17.6 in
448 mm
Maximum Digging Depth
13.3 in
337.5 mm
Overall Width
67.3 in
1,710 mm
Maximum Reach - Ground Line
30.2 in
766 mm
-
Weight
1,345 lb
610 kg
Winch Drive
93.0 in
93.0 mm
Hydrostatic
Control
93.0 in
93.0 mm
Hydraulic
Speed
93.0 in
93.0 mm
Variable
Drum Capacity - Optional Cable
256 ft
78 m
Maximum Line Speed - Full Drum
207 ft/min
63 m/min
Rope Diameter - Optional
0.75 in
19 mm
Maximum Line Pull - Full Drum
25,000 lb
11,340 kg
Maximum Line Speed - Bare Drum
131 ft/min
40 m/min
Rope Diameter - Recommended
0.63 in
16 mm
Drum Width
10.8 in
274 mm
Drum Capacity - Recommended Cable
371 ft
113 m
Maximum Line Pull - Bare Drum
40,000 lb
18,144 kg
Drum Diameter
10 in
254 mm
Winch Length
27.76 in
705 mm
Throat Clearance
6.75 in
171.5 mm
Overall Width
29.2 in
741 mm
-
POWER TRAIN
-
Air cleaner with precleaner, automatic dust ejection and underhood intake
-
Aluminum bar plate cooling system (radiator, power train)
-
Automatic traction control
-
Cat C3.6 diesel engine
-
Drive, auxiliary
-
Dual path, closed loop, hydrostatic transmission
-
Electric fuel pump
-
Fuel/water separator
-
Turbocharged aftercooled
-
-
ELECTRICAL
-
Alarm, backup
-
Alternator, 150 amp, heavy duty
-
Batteries, heavy duty, maintenance free, 1,000 CCA
-
Diagnostic connector
-
Four integrated front halogen lights, two rear halogen
-
Horn, electric
-
Starter, electric, 12 V, heavy duty
-
-
UNDERCARRIAGE
-
SALT undercarriage (43 section)
-
Carrier rollers
-
Guards, front/rear guiding
-
Six roller track frame
-
Track adjusters, hydraulic
-
Track rollers, lifetime lubricated
-
-
HYDRAULIC
-
Hydraulic pump and oil
-
Single lever, three function control
-
Three valve hydraulics
-
-
CAT TECHNOLOGY
-
Cat Product Link PLE643/PLE743 Cellular
-
Slope Indicate
-
Stable blade
-
Compatibility with radios and base stations from Trimble, Topcon, and Leica
-
Capability to install 3D grade systems from Trimble, Topcon, and Leica
-
-
ATTACHMENTS
-
Rigid drawbar
-
Front pull device
-
-
OPERATOR ENVIRONMENT
-
Armrests, adjustable
-
Coat hook
-
Controls, seat mounted, fore/aft adjustment
-
Cup holders
-
Eco mode
-
Electronic Monitoring system with gauge: – Chassis slope indication – Diesel exhaust fluid (DEF) – Engine coolant temperature – Fuel level – Hydraulic oil temperature
-
Electronic security system
-
Engine air cleaner service indicator
-
Engine RPM and gear display
-
Floor mat, rubber, heavy duty
-
Foot pads, dash
-
Hour meter, electronic
-
Independent forward/reverse speed settings
-
Mirror, rearview, inside
-
Power port, 12 volt
-
ROPS/FOPS canopy
-
Seat, air suspended, cloth or vinyl
-
Seatbelt, hi-vis retractable 76 mm (3')
-
Seatbelt buckling indicator/reminder
-
Single pedal combining decel and brake functions
-
Speed recall
-
Storage compartment
-
Throttle switch, rotary
-
Travel speed limiter, electronic
-
-
POWER TRAIN
-
Air cleaner with external precleaner
-
Installation, winch
-
-
ELECTRICAL
-
UNDERCARRIAGE
-
Abrasion undercarriage (38 section)
-
Track Pairs – Track, 406 mm (16 in) – Track, 635 mm (25 in) – Track, 762 mm (30 in)
-
-
HYDRAULIC
-
Four valve for use with ripper
-
Four valve for use with winch
-
-
CAT TECHNOLOGY
-
Cat GRADE with Slope Assist
-
Cat GRADE with 3D
-
Cat Product Link PLE683/PLE783 Cellular/Satellite
-
Full-color 10 in (254 mm) touchscreen grade display
-
Power Pitch
-
-
ATTACHMENTS
-
Drawbar, towing
-
Machine security system
-
Mounting, winch
-
Ripper, parallelogram, includes three shanks and teeth
-
Winch, hydraulic, high performance
-
Winch, hydraulic, retrieval
-
-
OPERATOR ENVIRONMENT
-
Cab, with air conditioning
-
Cab, polycarbonate windows and air conditioning
-
Radio, AM/FM Bluetooth®
-
Seat, air suspension, choice of: – Vinyl, heated seat with heated controls – Cloth, heated seat with heated controls – Cloth, heated and ventilated seat with heated controls
-
Sound suppression
-
-
OTHER
-
Heater, engine, coolant 120 V/240 V
-
Starting aid, ether
-
Similar Models
WHY CHOOSE EMPIRE
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance