THIS IS MY SELECT
Rotary Drills
MD6200 Rotary Blasthole Drill Specifications
Bit Load
93.0 hp
Up to 16 964 kg (37,400 lb)
Hole Diameter
93.0 hp
Up to 127-200 mm (5.0-7.87 in)
Engine
93.0 hp
Cat® C18 @ 1,800 rpm
THIS IS MY SELECT
backhoe loader
MD6200 Rotary Blasthole Drill Specifications
Bit Load
93.0 hp
Up to 16 964 kg (37,400 lb)
Hole Diameter
93.0 hp
Up to 127-200 mm (5.0-7.87 in)
Engine
93.0 hp
Cat® C18 @ 1,800 rpm
Specifications
MD6200 Rotary Blasthole Drill Specifications – 11 m (36 ft)
-
Type (1)
93.0 in
93.0 mm
Autonomous ready
Components (1)
93.0 in
93.0 mm
Drill depth meter
Components (2)
93.0 in
93.0 mm
Drill Assist (auto level, auto retract jacks, auto mast raise and lower, optional, single-pass auto drill)
Components (3)
93.0 in
93.0 mm
Cat Terrain ready
Components (4)
93.0 in
93.0 mm
Product Link Elite™
-
U.S. EPA Tier 2 Equivalent - Engine
93.0 in
93.0 mm
C18 @ 1,800 rpm
U.S. EPA Tier 2 Equivalent - Emissions
93.0 in
93.0 mm
U.S. EPA Tier 2 equivalent
U.S. EPA Tier 4 Final - Engine
93.0 in
93.0 mm
C18 @ 1,800 rpm
U.S. EPA Tier 4 Final - Emissions
93.0 in
93.0 mm
U.S. EPA Tier 4 Final
Compressor - Rotary Drilling
93.0 in
93.0 mm
32.6 m³/min (1,150 ft³/min) @ 8.6 bar (125 psi)
Angle Drilling Available
93.0 in
93.0 mm
30° to –15° in 5° increments
Bit Load (single-Pass)
37,400 lb
16,964 kg
Hoist Speed
4.3 ft/s
1.32 m/s
Hole Diameter Range
93.0 in
93.0 mm
127-200 mm (5.0-7.87 in)
Hole Depth Range - Single-Pass Depth
36 ft
11 m
Compressor - DTH Drilling
93.0 in
93.0 mm
29.7 m³/min (1,050 ft³/min) @ 24.1 bar (350 psi)
Pull-DownCapacity
93.0 in
93.0 mm
Up to 15 876 kg (Up to 35,000 lb)
Hoist Capacity
93.0 in
93.0 mm
Up to 11 907 kg (Up to 26,250 lb)
Hole Depth Range - Multi-Pass Depth
93.0 in
93.0 mm
Down to 47.58 m (Down to 156 ft)
U.S. EPA Tier 4 Final - Power Rating (ISO 14396)
589 HP
439 kW
U.S. EPA Tier 2 Equivalent - Power Rating (ISO 14396)
587 HP
438 kW
-
Climate Level 1 Standard Fluids and Lubricants (1)
93.0 in
93.0 mm
Rated down to –1° C (30° F)
Climate Level 1 Standard Fluids and Lubricants (2)
93.0 in
93.0 mm
Withstands high heat up to 52° C (125° F)
Climate Level 2 Arctic Fluids and Lubricants, Engine Block and Manifold Heater 120V or 240V
93.0 in
93.0 mm
Rated down to –18° C (0° F)
-
DTH Drilling
93.0 in
93.0 mm
Includes tool lubrication system
Rotary Drilling
93.0 in
93.0 mm
Optional tool lubrication system
Note
93.0 in
93.0 mm
With the compressor’s electronic controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both high and low pressure compressors contain this feature.
DTH Drilling - 1050 cfm/350 psi
93.0 in
93.0 mm
29.7 m³/min (1,050 ft³/min) @ 24.1 bar (350 psi) with 113.5 L (30 gal) tool oiler
Rotary Drilling - 1150 cfm/125 psi
93.0 in
93.0 mm
32.6 m³/min (1,150 ft³/min) @ 8.6 bar (125 psi)
-
Components (1)
93.0 in
93.0 mm
Coolers with easy cleaning access
Components (2)
93.0 in
93.0 mm
All cooler core sections are replaceable
Components (3)
93.0 in
93.0 mm
Functional in ambient temperature of up to 52° C (125° F)
Components (4)
93.0 in
93.0 mm
Automatic variable speed fan control
-
Note
93.0 in
93.0 mm
*For width with platform access to cab or service platform walkway contact the factory.
Width non-cab end
11.7 ft
3.57 m
Body Length
31 ft
9.44 m
Mast only length
52.1 ft
15.89 m
Height mast down
11.75 ft
3.58 m
Length mast down
57.5 ft
17.54 m
Width cab end*
13.7 ft
4.18 m
Height mast up
54.3 ft
16.54 m
-
Components (1)
93.0 in
93.0 mm
Drill pipe thread greaser with remote fill tank that also accommodates disposable grease bucket
-
9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 2
4.5 in
114 mm
9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 1
4 in
101 mm
9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 5
6 in
152 mm
9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 4
5.5 in
140 mm
9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 3
5 in
127 mm
-
High Volume Water Injection - Maximum - Tank Above Deck - Capacity
200 gal (US)
757 l
Water Injection - Tank Mounted Below Front Deck - Components
93.0 in
93.0 mm
Water flow meter, volume control, tank fill level indicator
High Volume Water Injection - Maximum - Tank Below Deck - Capacity
200 gal (US)
757 l
Water Injection - Tank Mounted Below Front Deck
200 gal (US)
757 l
High Volume Water Injection - Maximum - Tanks Total Capacity
400 gal (US)
1,514 l
Water Injection plus Dust Collector (1)
93.0 in
93.0 mm
76.5 m³/min (2,700 ft³/min) dust collector; includes standard water injection
Water Injection plus Dust Collector (2)
93.0 in
93.0 mm
Self-cleaning filters, dust chute clean-out door
Choices (1)
93.0 in
93.0 mm
Static dust curtains, four sides boxed enclosed
Choices (2)
93.0 in
93.0 mm
Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector)
Choices (3)
93.0 in
93.0 mm
Tram off spray system (option)
-
Feature (3)
93.0 in
93.0 mm
Tier 4 Final package complete with DEF/Engine Shutdown Control Package
Feature (1)
93.0 in
93.0 mm
Dual starter motors
Feature (2)
93.0 in
93.0 mm
Ether starting aid
-
Choice (1)
93.0 in
93.0 mm
Fixed access steps to the cab area
Choice (2)
93.0 in
93.0 mm
Small platform to the cab includes fixed access steps
Choice (3)
93.0 in
93.0 mm
Platform access to the cab with full length service access walkway includes fixed access steps and self-closing gates
-
Features (1)
93.0 in
93.0 mm
Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life
Features (2)
93.0 in
93.0 mm
Slip resistant surfaces
Features (3)
93.0 in
93.0 mm
Fuel tank capacity 833 L (220 gal)
Components (1)
93.0 in
93.0 mm
Three leveling jacks provide leveling on a 7° bench (any orientation)
Components (2)
93.0 in
93.0 mm
Heavy duty tow hooks (non-drill end)
Components (3)
93.0 in
93.0 mm
Four (4) lift lugs, for use with cables or chains
-
Components (1)
93.0 in
93.0 mm
Two (2) main pumps – 85 cc (piston with proportional electronic controls)
Components (2)
93.0 in
93.0 mm
One (1) auxiliary circuit pump – 45 cc (piston, load sensing)
Components (3)
93.0 in
93.0 mm
One (1) fan pump – 45 cc (piston with proportional electronic controls)
Components (4)
93.0 in
93.0 mm
One (1) charge pump – 73.8 cc (gear, fixed displacement)
Components (5)
93.0 in
93.0 mm
Scheduled Oil Sampling (S·O·SSM) ports
-
Single-Pass Depth
36 ft
11 m
Multi-Pass Depth
93.0 in
93.0 mm
Down to 47.58 m (Down to 156 ft)
Pulldown - Rated Single Cylinder Pull-Down/Hoist System
93.0 in
93.0 mm
Up to 15 876 kg (Up to 35,000 lb)
Hoist
93.0 in
93.0 mm
Up to 11 907 kg (Up to 26,250 lb)
-
Features (1)
93.0 in
93.0 mm
Pipe carousel: – Accepts quantity of four (4) 9.14 m (30 ft) pipes
Features (2)
93.0 in
93.0 mm
Standard angle drilling package (0 to 30 degrees, in 5-degree increments)
Features (3)
93.0 in
93.0 mm
Optional negative angle drilling package (0 to –15 degrees, in 5-degree increments) for a total range of (30 to –15 degrees)
Features (4)
93.0 in
93.0 mm
Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters up to 152 mm (6.0 in)
Features (5)
93.0 in
93.0 mm
Drills strings configured for bit changes above deck
Features (6)
93.0 in
93.0 mm
Single cylinder pulldown/hoist system
Features (7)
93.0 in
93.0 mm
Sliding deck wrench assembly
Features (8)
93.0 in
93.0 mm
Configured with roller deck bushing (for low pressure/tricone drilling)
Features (9)
93.0 in
93.0 mm
Two-piece deck bushing (for high pressure DTH drilling)
Features (10)
93.0 in
93.0 mm
Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating
Features (11)
93.0 in
93.0 mm
Variable grip hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in)
Features (12)
93.0 in
93.0 mm
Closed circuit camera mounted in mast to view pipe carousel/top drive operation
Features (13)
93.0 in
93.0 mm
Pipe positioner for angle drilling, multi-pass pipe handling
Features (14)
93.0 in
93.0 mm
Manual pipe catcher – One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket
-
Components (1)
93.0 in
93.0 mm
Electric controls for drilling, tramming, leveling plus auxiliary functions
Components (2)
93.0 in
93.0 mm
Rotary torque control
Components (3)
93.0 in
93.0 mm
Virtual rotary head travel stops
Components (4)
93.0 in
93.0 mm
Pipe positioner engaged/disengaged indicator
Components (5)
93.0 in
93.0 mm
Drill depth meter
Components (6)
93.0 in
93.0 mm
Drill performance and display system
Components (7)
93.0 in
93.0 mm
Delayed engine shut down
Components (8)
93.0 in
93.0 mm
Filter indicators for hydraulic, fuel, compressor and engine
Components (9)
93.0 in
93.0 mm
Jack pressure sensors
Components (10)
93.0 in
93.0 mm
Data logging of machine health with warnings and fault code records with export capability
Components (11)
93.0 in
93.0 mm
Dust suppression control
Components (12)
93.0 in
93.0 mm
Mast lock indicator
Components (13)
93.0 in
93.0 mm
ECM proportional fan speed control system
Components (14)
93.0 in
93.0 mm
Tram interlock, machine stability limits
Components (15)
93.0 in
93.0 mm
Tram interlock, pipe in hole
Components (16)
93.0 in
93.0 mm
Tram interlock, mast up and locked or down and parked
Components (17)
93.0 in
93.0 mm
Tram interlock, jacks retracted
Components (18)
93.0 in
93.0 mm
Tram interlock, winch parked
Components (19)
93.0 in
93.0 mm
Cab environment controls (AC, heat, fan speeds)
Components (20)
93.0 in
93.0 mm
Pre wired for Terrain and Autonomous Operation
-
Cab Design
93.0 in
93.0 mm
– FOPS cab has 1.9 m² (20.5 ft²) floor space – Rubber shock-mounts absorb mechanical vibration – Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) high-definition color screens and 12 volt power port – Additional display screen for cc cameras; color, high-definition 254 mm (10 in) – Power convertor 24V to 12V – Radio-ready for communication and entertainment stereo – Two swing out doors and Cat keyed locks – Literature holder – Storage area suitable for lunchbox
Cab Packages
93.0 in
93.0 mm
– Standard configuration includes a fabric seat, removable floor mat, single pane window glass and driller window guard – Premium configuration includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass and driller window guard
Seating
93.0 in
93.0 mm
– Seat swivels, locks and has two point retractable/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
Windows
93.0 in
93.0 mm
– Large windows front, rear and right cab side; full length drill window with guard – Window shades (option) – Windshield wiper with a common washer tank – Manometer Pressure Gauge (option)
Lighting
93.0 in
93.0 mm
– LED interior lights, backlit joysticks and keypads – Flood lights for the drill perimeter; area spotlights – Mast beacon and tram flashing strobe light (option)
HVAC
93.0 in
93.0 mm
– Floor heating vent – Filter access from deck, 500 hour service interval – Defogging HVAC vents on main window
Cameras
93.0 in
93.0 mm
– Three (3) CC cameras (front and left side) providing 360° vision coverage from operators seat; camera on the mast to view pipe carousel/top drive operation
-
Choice (1)
93.0 in
93.0 mm
Low pressure 8.6 bar (125 psi)
Choice (2)
93.0 in
93.0 mm
High pressure 24.1 bar (350 psi)
-
Torque - Single Motor
6,166 lb/ft
8,360 N·m
Rotation Speed
93.0 in
93.0 mm
0-150 rpm
Components (1)
93.0 in
93.0 mm
Output shaft with box-end API-IF (NC46) 101 mm (4 in) thread
Components (2)
93.0 in
93.0 mm
Rotary torque control
Components (3)
93.0 in
93.0 mm
Virtual rotary head travel interlocks
-
Feature (1)
93.0 in
93.0 mm
Approach angle of 15-degrees facilitates loading and unloading on a lowboy
Components (1)
93.0 in
93.0 mm
Seven (7) emergency stop buttons
Components (2)
93.0 in
93.0 mm
Hinged window guard over the full length of the front drill window
Components (3)
93.0 in
93.0 mm
Conditional safety interlocks
Components (4)
93.0 in
93.0 mm
Self-closing gates
Components (5)
93.0 in
93.0 mm
Electric horn activated by push button in the cab
Components (6)
93.0 in
93.0 mm
Automatic, audible tram alarm
Components (7)
93.0 in
93.0 mm
Battery disconnect and starter switches can be locked out
Components (8)
93.0 in
93.0 mm
Air hose retention devices
Components (9)
93.0 in
93.0 mm
Slip resistant platform surfaces
Components (10)
93.0 in
93.0 mm
Machine lifting provisions
Components (11)
93.0 in
93.0 mm
FOPS Certified Operator Cab
-
Package (1)
93.0 in
93.0 mm
Basic – Centralized manual lubrication for all pivot points, gravity fill for fuel and water
Package (2)
93.0 in
93.0 mm
Standard – Automated lubrication system, fast fill for fuel and water (option)
Package (3)
93.0 in
93.0 mm
Premium – Automated lubrication system, fast fill fuel and water, service center for lubricant drain and fill plus blowdown hose (option)
-
Bit Load
93.0 in
93.0 mm
Up to 16 964 kg (37,400 lb)
Hole Diameter
93.0 in
93.0 mm
Up to 127-200 mm (5.0-7.87 in)
Engine
93.0 in
93.0 mm
Cat® C18 @ 1,800 rpm
-
Components (8)
93.0 in
93.0 mm
Top sub
Components (7)
93.0 in
93.0 mm
Drill tool lubricator is included with selection of DTH Compressor
Components (1)
93.0 in
93.0 mm
Two-piece bushing
Components (2)
93.0 in
93.0 mm
Pipe positioner clamps
Components (3)
93.0 in
93.0 mm
Deck wrench
Components (4)
93.0 in
93.0 mm
Shock sub
Components (5)
93.0 in
93.0 mm
Cross over subs
Components (6)
93.0 in
93.0 mm
Pipe wiper seal
-
Components (7)
93.0 in
93.0 mm
Drill tool lubricator (optional)
Components (1)
93.0 in
93.0 mm
One-piece roller deck bushing
Components (2)
93.0 in
93.0 mm
Pipe positioner clamps
Components (3)
93.0 in
93.0 mm
Deck wrench
Components (4)
93.0 in
93.0 mm
Bit sub
Components (5)
93.0 in
93.0 mm
Top sub
Components (6)
93.0 in
93.0 mm
Pipe wiper seal
-
Model
93.0 in
93.0 mm
Cat 336 Excavator type
Carrier Rollers
93.0 in
93.0 mm
Three (3)
Triple Grousers (1)
93.0 in
93.0 mm
600 mm (23.6 in); 0.89 bar (12.6 psi) ground pressure
Drawbar Pull
93.0 in
93.0 mm
TBD
Components (1)
93.0 in
93.0 mm
Track chain guards and guides
Lower rollers
93.0 in
93.0 mm
Eight (8)
Travel Speed - High
2 mile/h
3.3 km/h
Travel Speed - Low
1.3 mile/h
2.1 km/h
-
Working Weight Range
93.0 in
93.0 mm
37 552-42 752 kg (82,789-94,253 lb)
-
MAST
-
Overhead winch assembly with cable and hook, plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating
-
Tool lubrication system for Rotary Drilling with 113.5 L (30 gal) capacity
-
Pipe thread greaser with reloadable tank or disposable grease bucket
-
Manual bit basket
-
-
SERVICE TOOLS
-
Bushing retention tool – 89 to 152 mm (3.5 to 6.0 in) wrench flats
-
Lifting bails (available on request; required for commissioning)
-
API thread 89 mm (3.5 in)
-
API thread 114 mm (4.5 in)
-
BECO thread 76 mm (3.0 in)
-
BECO thread 89 mm (3.5 in)
-
BECO thread 101 mm (4.0 in)
-
BECO thread 114 mm (4.5 in)
-
-
OPERATOR ENVIRONMENT
-
Cab pressure gauge
-
Window shades
-
Drill assist; single pass auto drill
-
-
TECHNOLOGY PRODUCTS
-
Product Link Elite; satellite, cellular or dual
-
Terrain guidance system hardware
-
-
DUST SUPPRESSION
-
Dust curtains, four sides boxed in, with hydraulic lifters to raise front and rear dust curtains (recommended with dry dust collector)
-
Tram off spray system
-
-
DRILL BITS, ROTARY TRICONE
-
Recommended for rotary applications
-
All bits have standard nozzles
-
Obtain S/M/H codes from the Rock Formation to Bit Conversion table https://catpublications.com search for PEXQ1027
-
Ship out plans for each drill configuration allow for one pallet of bits. Additional pallets may require an additional truck. – 171 mm (6.75 in), Option 1, (S2) – 171 mm (6.75 in), Option 2, (M1) – 171 mm (6.75 in), Option 3, (M3) – 200 mm (7.875 in), Option 1, (S2) – 200 mm (7.875 in), Option 2, (M1) – 200 mm (7.875 in), Option 2, (M3)
-
-
DRILL PIPE
Similar Models
WHY CHOOSE EMPIRE
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance