THIS IS MY SELECT

Electric Rope Shovels

7295 Electric Rope Shovel

Dipper Payload

50 t

Dipper Capacity

93.0 hp

19.1-38.2 m3 (25-50 yd3)

Working Weight - With Dipper and Standard Links

1,748,837 lb

THIS IS MY SELECT

backhoe loader

7295 Electric Rope Shovel

Dipper Payload

50 t

Dipper Capacity

93.0 hp

19.1-38.2 m3 (25-50 yd3)

Working Weight - With Dipper and Standard Links

1,748,837 lb

Specifications

One of our mid-range shovels, the Cat 7295 provides proven Cat AC IGBT electronics and a robust front end design. The 7295 provides a 50-ton (45-tonne) payload, plus three- and four-pass loading capability with the Cat 785 ,789 and 793 mining trucks for an optimal loading and hauling operation.

      • Dipper Payload

        50 t

        45 t

        Dipper Capacity

        93.0 in

        93.0 mm

        19.1-38.2 m3 (25-50 yd3)

        Note

        93.0 in

        93.0 mm

        Dependent on application and material density.

      • Working Weight - With Dipper and Standard Links

        1,748,837 lb

        793,259 kg

        Ballast - Furnished By Customer

        352,000 lb

        159,665 kg

        Note (1)

        93.0 in

        93.0 mm

        These weights will vary slightly depending upon dipper and optional equipment selection.

        Note (2)

        93.0 in

        93.0 mm

        All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

      • Planetary Propel

        93.0 in

        93.0 mm

        Dual-motor independent drive.

        Ground Bearing Pressure

        93.0 in

        93.0 mm

        Ground bearing pressure is dependent upon many factors.

        Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard

        28.22 in

        8.6 cm

        Ground Bearing Pressure - 182.9 cm (72 in) Treads

        39 in

        269 cm

        Upper Works Overall Width - Including Standard Walkways

        41.33 in

        12.6 cm

        Swing

        93.0 in

        93.0 mm

        Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.

        Hoist

        93.0 in

        93.0 mm

        A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.

        Ground Bearing Pressure - Total Effective Bearing Area

        315.6 ft²

        29.3

      • Cutting Height - Maximum

        45 ft

        13.7 m

        Dumping Height - With Clearance to Open Dipper Door

        27.56 ft

        8.4 m

        Cutting Radius - Maximum

        67.59 ft

        20.6 m

        Revolving Frame Tail Swing Radius

        25.59 in

        7.8 m

        Radius of Level Floor

        48.88 ft

        14.9 m

        Note (1)

        93.0 in

        93.0 mm

        Optimal working ranges based on loading a Cat® 785D truck.

        Note (2)

        93.0 in

        93.0 mm

        *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

      • Type

        93.0 in

        93.0 mm

        Automatic, single-line system for open gear lubricant and grease.

        Components (1)

        93.0 in

        93.0 mm

        6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.

        Components (2)

        93.0 in

        93.0 mm

        External fast fill from lower level.

      • Power Requirements - Peak power

        2,886 HP

        2,152 kW

        Drive

        93.0 in

        93.0 mm

        IGBT Acutrol drive system.

        Power Requirements - Voltage

        93.0 in

        93.0 mm

        3 phase, 50/60 Hz, 7,200V

        Power Requirements - 50 Hz

        93.0 in

        93.0 mm

        6,000V, 6,600V, 7,200V

        Power Requirements - Average Power Demand

        93.0 in

        93.0 mm

        538-753 kW (721-1,010 hp)

        Power Requirements - 60 Hz

        93.0 in

        93.0 mm

        4,160V, 7,200V

        Note

        93.0 in

        93.0 mm

        Other voltages available to suit customer requirements.

      • Components

        93.0 in

        93.0 mm

        One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

        Standard Rope Data - Hoist - Diameter

        2.375 in

        60 mm

        Standard Rope Data - Boom Suspension - No.

        93.0 in

        93.0 mm

        4

        Standard Rope Data - Dipper Trip - Diameter

        0.625 in

        16 mm

        Standard Rope Data - Retract - Diameter

        2.25 in

        57 mm

        Standard Rope Data - Retract - No.

        93.0 in

        93.0 mm

        1

        Standard Rope Data - Boom Suspension - Diameter

        2.75 in

        70 mm

        Standard Rope Data - Crowd - Diameter

        2.25 in

        57 cm

        Standard Rope Data - Dipper Trip - No.

        93.0 in

        93.0 mm

        1

        Crowd

        93.0 in

        93.0 mm

        Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

        Standard Rope Data - Hoist - No.

        93.0 in

        93.0 mm

        2

        Standard Rope Data - Crowd - No.

        93.0 in

        93.0 mm

        1

        Note

        93.0 in

        93.0 mm

        High impact ropes available as an option

      WHY CHOOSE EMPIRE

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance