THIS IS MY SELECT
Electric Rope Shovels
7495 Electric Rope Shovel
Dipper Payload
120 t
Dipper Capacity
93.0 hp
30.6-62.7 m3 (40-82 yd3)
Working Weight - With Dipper and Standard Links
3,056,000 lb
THIS IS MY SELECT
backhoe loader
7495 Electric Rope Shovel
Dipper Payload
120 t
Dipper Capacity
93.0 hp
30.6-62.7 m3 (40-82 yd3)
Working Weight - With Dipper and Standard Links
3,056,000 lb
Specifications
Electric rope shovels have been successfully removing overburden and ore on mine sites around the world for more than a century. Driven by a vision to make these highly productive machines safer, more reliable and even more productive, we challenged the status quo and built an electric rope shovel that's better.
-
Dipper Payload
120 t
109 t
Dipper Capacity
93.0 in
93.0 mm
30.6-62.7 m3 (40-82 yd3)
Note
93.0 in
93.0 mm
Dependent on application and material density
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)
120 t
109 t
-
Operating Weight
3,056,000 lb
1,386,178 kg
Maximum Dumping Height
28.9 ft
8.8 m
Dipper Payload
120 ton (US)
109 t
Dipper Capacities
93.0 in
93.0 mm
30.6-62.7 m3 (40-82 yd3)
-
Radius of Level Floor
56.1 ft
17.1 m
Cutting Radius - Maximum
80 ft
24.4 m
Revolving Frame Tail Swing Radius
30.5 ft
9.3 m
Dumping Height - With Clearance to Open Dipper Door
28.9 ft
8.8 m
Cutting Height - Maximum
53.5 ft
16.3 m
Note (1)
93.0 in
93.0 mm
Optimal working ranges based on loading a Cat 797F truck.
Note (2)
93.0 in
93.0 mm
*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
-
Working Weight - With Dipper and Standard Links
3,056,000 lb
1,386,178 kg
Ballast - Furnished By Customer
667,150 lb
302,614 kg
Note (1)
93.0 in
93.0 mm
These weights will vary slightly depending upon dipper and optional equipment selection
Note (2)
93.0 in
93.0 mm
All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.
-
Ground Bearing Pressure - Note
93.0 in
93.0 mm
Ground bearing pressure is dependent upon many factors
Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads
38 ft
11.6 m
Hoist
93.0 in
93.0 mm
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard
36 ft
11 m
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm) Treads
93.0 in
93.0 mm
36 m2 (380 kPa); 386 ft2 (55 psi)
Planetary Propel
93.0 in
93.0 mm
Dual-motor independent drive
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm) Treads
93.0 in
93.0 mm
47 m2 (297 kPa); 501 ft2 (43 psi)
Upper Works Overall Width - Including Standard Walkways
41.9 ft
12.8 m
Swing
93.0 in
93.0 mm
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
-
Type
93.0 in
93.0 mm
Automatic, single-line system for open gear lubricant and grease
Components (1)
93.0 in
93.0 mm
Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Components (2)
93.0 in
93.0 mm
External FastFil from lower level
-
Power Requirements - Note
93.0 in
93.0 mm
Other voltage options available to suit customer requirements
Power Requirements - Average Power Demand
93.0 in
93.0 mm
934-1308 kW
Power Requirements - Peak power
93.0 in
93.0 mm
3737 kW
Drive
93.0 in
93.0 mm
IGBT Acutrol drive system
Power Requirements - Voltage
93.0 in
93.0 mm
3 phase, 50/60 Hz, 7,200V
Power Requirements - 60 Hz
93.0 in
93.0 mm
7,200V, 13,800V
Power Requirements - 50 Hz
93.0 in
93.0 mm
6,000V, 6,600V, 7,200V, 11,000V
System Voltage - Nominal
93.0 in
93.0 mm
50/60 Hz, 7,200V
-
Rope Data - Hoist - Diameter
2.75 in
70 mm
Rope Data - Retract - Diameter
2.5 in
64 mm
Rope Data - Retract - No.
93.0 in
93.0 mm
1
Rope Data - Hoist - No.
93.0 in
93.0 mm
2
Rope Data - Dipper Trip - No.
93.0 in
93.0 mm
1
Rope Data - Crowd - Diameter
2.5 in
64 mm
Rope Data - Crowd - No.
93.0 in
93.0 mm
1
Type
93.0 in
93.0 mm
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Rope Data - Boom Suspension - Diameter
3.25 in
83 mm
Rope Data - Dipper Trip - Diameter
0.75 in
19 mm
Rope Data - Note
93.0 in
93.0 mm
High impact ropes available as an option
Rope Data - Boom Suspension - No.
93.0 in
93.0 mm
4
Crowd (1)
93.0 in
93.0 mm
Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Crowd (2)
93.0 in
93.0 mm
(Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Similar Models
WHY CHOOSE EMPIRE
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance