THIS IS MY SELECT

Electric Rope Shovels

7495 Electric Rope Shovel

Dipper Payload

120 t

Dipper Capacity

93.0 hp

30.6-62.7 m3 (40-82 yd3)

Working Weight - With Dipper and Standard Links

3,066,000 lb

THIS IS MY SELECT

backhoe loader

7495 Electric Rope Shovel

Dipper Payload

120 t

Dipper Capacity

93.0 hp

30.6-62.7 m3 (40-82 yd3)

Working Weight - With Dipper and Standard Links

3,066,000 lb

Specifications

Electric rope shovels have been successfully removing overburden and ore on mine sites around the world for more than a century. Driven by a vision to make these highly productive machines safer, more reliable and even more productive, we challenged the status quo and built an electric rope shovel that's better.

      • Dipper Payload

        120 t

        109 t

        Dipper Capacity

        93.0 in

        93.0 mm

        30.6-62.7 m3 (40-82 yd3)

        Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)

        120 t

        109 t

        Note

        93.0 in

        93.0 mm

        Dependent on application and material density

      • Operating Weight

        3,066,000 lb

        1,390,714 kg

        Dipper Payload

        120 ton (US)

        109 t

        Maximum Dumping Height

        28.9 ft

        8.8 m

        Dipper Capacities

        93.0 in

        93.0 mm

        30.6-62.7 m3 (40-82 yd3)

      • Cutting Radius - Maximum

        80 ft

        24.4 m

        Radius of Level Floor

        56.1 ft

        17.1 m

        Revolving Frame Tail Swing Radius

        30.5 ft

        9.3 m

        Dumping Height - With Clearance to Open Dipper Door

        28.9 ft

        8.8 m

        Cutting Height - Maximum

        53.5 ft

        16.3 m

        Note (1)

        93.0 in

        93.0 mm

        Optimal working ranges based on loading a Cat 795F AC truck.

        Note (2)

        93.0 in

        93.0 mm

        *All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

      • Working Weight - With Dipper and Standard Links

        3,066,000 lb

        1,390,714 kg

        Ballast - Furnished By Customer

        667,150 lb

        302,614 kg

        Note (1)

        93.0 in

        93.0 mm

        These weights will vary slightly depending upon dipper and optional equipment selection

        Note (2)

        93.0 in

        93.0 mm

        All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

      • Planetary Propel

        93.0 in

        93.0 mm

        Dual-motor independent drive

        Swing

        93.0 in

        93.0 mm

        Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.

        Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads

        93.0 in

        93.0 mm

        46.6 m2 (298 kPa); 501.7 ft2 (43 psi)

        Upper Works Overall Width - Including Standard Walkways

        41.9 ft

        12.8 m

        Ground Bearing Pressure - Note

        93.0 in

        93.0 mm

        Ground bearing pressure is dependent upon many factors

        Hoist

        93.0 in

        93.0 mm

        A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

        Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard

        93.0 in

        93.0 mm

        36 m2 (382 kPa); 386 ft2 (55 psi)

        Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads

        38 ft

        11.6 m

        Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard

        36 ft

        11 m

      • Type

        93.0 in

        93.0 mm

        Automatic, single-line system for open gear lubricant and grease

        Components (1)

        93.0 in

        93.0 mm

        Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room

        Components (2)

        93.0 in

        93.0 mm

        External FastFil from lower level

      • Power Requirements - Peak power

        93.0 in

        93.0 mm

        3778 kW

        System Voltage - Nominal

        93.0 in

        93.0 mm

        50/60 Hz, 7,200V

        Power Requirements - 60 Hz

        93.0 in

        93.0 mm

        7,200V, 13,800V

        Power Requirements - Voltage

        93.0 in

        93.0 mm

        3 phase, 50/60 Hz, 7,200V

        Power Requirements - Note

        93.0 in

        93.0 mm

        Other voltage options available to suit customer requirements

        Drive

        93.0 in

        93.0 mm

        IGBT Acutrol drive system

        Power Requirements - 50 Hz

        93.0 in

        93.0 mm

        6,000V, 6,600V, 7,200V, 11,000V

        Power Requirements - Average Power Demand

        93.0 in

        93.0 mm

        945-1322 kW

      • Rope Data - Boom Suspension - No.

        93.0 in

        93.0 mm

        4

        Rope Data - Boom Suspension - Diameter

        3.25 in

        83 mm

        Type

        93.0 in

        93.0 mm

        One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

        Rope Data - Note

        93.0 in

        93.0 mm

        High impact ropes available as an option

        Rope Data - Dipper Trip - No.

        93.0 in

        93.0 mm

        1

        Rope Data - Hoist - No.

        93.0 in

        93.0 mm

        2

        Rope Data - Hoist - Diameter

        2.75 in

        70 mm

        Rope Data - Dipper Trip - Diameter

        0.75 in

        19 mm

        Crowd (1)

        93.0 in

        93.0 mm

        HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.

        Crowd (2)

        93.0 in

        93.0 mm

        (Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

      WHY CHOOSE EMPIRE

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance