Dipper Payload

90 t

82 t

Dipper Capacity

93.0 in

93.0 mm

27.5-60.4 m3 (36-79 yd3)

Note

93.0 in

93.0 mm

Dependent on application and material density.

Working Weight - With Dipper and Standard Links

2,856,700 lb

1,295,777 kg

Ballast - Furnished By Customer

574,000 lb

260,362 kg

Note (1)

93.0 in

93.0 mm

These weights will vary slightly depending upon dipper and optional equipment selection.

Note (2)

93.0 in

93.0 mm

All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.

Planetary Propel

93.0 in

93.0 mm

Dual-motor independent drive.

Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard

32.75 ft

10 m

Upper Works Overall Width - Including Standard Walkways

44.25 ft

13.5 m

Ground Bearing Pressure - 274.3 cm (108 in) Treads

46 psi

316 kPa

Swing

93.0 in

93.0 mm

Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.

Hoist

93.0 in

93.0 mm

A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

Ground Bearing Pressure - Total Effective Bearing Area (2)

442 ft²

41 m²

Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard

58 psi

400 kPa

Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads

34.75 ft

10.6 m

Ground Bearing Pressure - Total Effective Bearing Area (1)

343 ft²

32 m²

Ground Bearing Pressure

93.0 in

93.0 mm

Ground bearing pressure is dependent upon many factors.

Cutting Radius - Maximum

74.75 ft

22.8 m

Revolving Frame Tail Swing Radius

30.51 ft

9.3 m

Cutting Height - Maximum

48.75 ft

14.9 m

Dumping Height - With Clearance to Open Dipper Door

30.84 ft

9.4 m

Radius of Level Floor

52.49 ft

16 m

Note (1)

93.0 in

93.0 mm

Optimal working ranges based on loading a Cat® 793F truck.

Note (2)

93.0 in

93.0 mm

*All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.

Type

93.0 in

93.0 mm

Automatic, single-line system for open gear lubricant and grease.

Components (1)

93.0 in

93.0 mm

6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.

Components (2)

93.0 in

93.0 mm

External fastfill from lower level.

Drive

93.0 in

93.0 mm

IGBT Acutrol drive system.

Power Requirements - Average Power Demand

93.0 in

93.0 mm

832-1165 kW (1,116-1,562 hp)

Power Requirements - Voltage

93.0 in

93.0 mm

3 phase, 50/60 Hz, 7,200V

Power Requirements - Peak power

4,466 HP

3,330 kW

Power Requirements - 50 Hz

93.0 in

93.0 mm

6,000V, 6,600V, 7,200V, 11,000V

Power Requirements - 60 Hz

93.0 in

93.0 mm

7,200V

Note

93.0 in

93.0 mm

Other voltage options available to suit customer requirements.

Rope Data - Boom Suspension - No.

93.0 in

93.0 mm

4

Rope Data - Dipper Trip - Diameter

0.625 in

16 mm

Rope Data - Hoist - No.

93.0 in

93.0 mm

2

Rope Data - Retract - No.

93.0 in

93.0 mm

1

Rope Data - Boom Suspension - Diameter

3.25 in

83 mm

Crowd

93.0 in

93.0 mm

Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Rope Data - Dipper Trip - No.

93.0 in

93.0 mm

1

Components

93.0 in

93.0 mm

One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

Rope Data - Hoist - Diameter

2.75 in

70 mm

Rope Data - Crowd - No.

93.0 in

93.0 mm

1

Rope Data - Retract - Diameter

2.5 in

64 mm

Rope Data - Crowd - Diameter

2.5 in

64 mm

Rope Data - Note

93.0 in

93.0 mm

High impact ropes available as an option.