THIS IS MY SELECT

Skid Steer Loaders

226D3 Skid Steer Loader

Gross Power - SAE J1995

67.1 HP

Rated Operating Capacity

1,550 lb

Operating Weight

5,849 lb

THIS IS MY SELECT

backhoe loader

226D3 Skid Steer Loader

Gross Power - SAE J1995

67.1 HP

Rated Operating Capacity

1,550 lb

Operating Weight

5,849 lb

Specifications

The Cat® 226D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

      • Gross Power - SAE J1995

        67.1 HP

        50.1 kW

        Net Power - SAE 1349

        65.8 HP

        49.1 kW

        Displacement

        134.3 in³

        2.2 l

        Stroke

        3.9 in

        100 mm

        Bore

        3.3 in

        84 mm

        Peak Torque - 1,500 rpm - SAE J1995

        153 ft·lbf

        208 N·m

        Net Power - ISO 9249

        66.5 HP

        49.6 kW

        Engine Model

        93.0 in

        93.0 mm

        Cat C2.2 CRDI

      • Operating Weight

        5,849 lb

        2,653 kg

        Note

        93.0 in

        93.0 mm

        * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

      • Rated Operating Capacity

        1,550 lb

        705 kg

        Rated Operating Capacity with Optional Counterweight

        1,650 lb

        750 kg

        Tipping Load

        3,100 lb

        1,410 kg

        Breakout Force - Tilt Cylinder

        3,927 lb

        1,781 kg

        Note

        93.0 in

        93.0 mm

        * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

      • Wheel Base

        41.5 in

        1,054 mm

        Length - With Bucket on Ground

        127.3 in

        3,234 mm

        Length - Without Bucket

        99.4 in

        2,524 mm

        Height - Top of Cab

        79.8 in

        2,028 mm

        Vehicle Width over Tires

        58.9 in

        1,497 mm

        Maximum Overall Height

        143.8 in

        3,652 mm

        Bucket Pin Height - Maximum Lift

        110.9 in

        2,818 mm

        Bucket Pin Height - Carry Position

        8.5 in

        215 mm

        Reach - Maximum Lift/Dump

        21 in

        533 mm

        Clearance at Maximum Lift and Dump

        81.8 in

        2,077 mm

        Ground Clearance

        6.9 in

        175 mm

        Departure Angle

        93.0 in

        93.0 mm

        27.9°

        Maximum Dump Angle

        93.0 in

        93.0 mm

        46.7°

        Rack Back Angle - Maximum Height

        93.0 in

        93.0 mm

        88.9°

        Bumper Overhang - Behind Rear Axle

        35.2 in

        8,944 mm

        Turning Radius from Center - Bucket

        77.8 in

        1,977 mm

        Maximum Reach - With Arms Parallel to Ground

        50.7 in

        1,288 mm

        Turning Radius from Center - Machine Rear

        59.6 in

        1,513 mm

        Turning Radius from Center - Coupler

        43.5 in

        1,104 mm

        Note

        93.0 in

        93.0 mm

        * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

      • Hydraulic Flow - Standard - Hydraulic Power (Calculated)

        33.5 HP

        26.5 kW

        Hydraulic Flow - High Flow - Hydraulic Power (Calculated)

        50.9 HP

        38 kW

        Hydraulic Flow - Standard - Loader Hydraulic Flow

        18 gal/min

        69 l/min

        Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow

        26 gal/min

        99 l/min

        Hydraulic Flow - Standard - Loader Hydraulic Pressure

        3,336 psi

        23,000 kPa

        Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure

        3,336 psi

        23,000 kPa

      • ROPS

        93.0 in

        93.0 mm

        ISO 3471:2008

        FOPS

        93.0 in

        93.0 mm

        ISO 3449:2005 Level I

      • Travel Speed - Forward or Reverse - Two Speed Option

        11.1 mile/h

        17.8 km/h

        Travel Speed - Forward or Reverse - One Speed

        7.6 mile/h

        12.3 km/h

      • Chain Box - Each Side

        1.8 gal (US)

        7 l

        Cooling System

        3.2 gal (US)

        12 l

        Engine Crankcase

        2.6 gal (US)

        10 l

        Fuel Tank

        15.1 gal (US)

        57 l

        Hydraulic System

        11.9 gal (US)

        45 l

        Hydraulic Tank

        9 gal (US)

        34 l

      • Air Conditioning

        93.0 in

        93.0 mm

        The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

      • Note (2)

        93.0 in

        93.0 mm

        **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

        Note (3)

        93.0 in

        93.0 mm

        ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

        Inside Cab**

        83 dB(A)

        83 dB(A)

        Note (1)

        93.0 in

        93.0 mm

        Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

        Outside Cab***

        102 dB(A)

        102 dB(A)

      • ELECTRICAL

        • 12 volt Electrical System

        • 80 ampere Alternator

        • Ignition Key Start/Stop Switch

        • Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light

        • Backup Alarm

        • Heavy Duty Battery, 850 CCA

      • OPERATOR ENVIRONMENT

        • Gauges: Fuel Level, Hour Meter

        • Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged

        • Fold In Ergonomic Contoured Armrest

        • Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages

        • ROPS Cab, Open, Tilt Up

        • FOPS, Level I

        • Top and Rear Windows

        • Floor Mat

        • Interior Rearview Mirror

        • 12 volt Electric Socket

        • Horn

        • Hand (Dial) Throttle, Electronic

        • Adjustable Joystick Controls

        • Anti-theft Security System with 6-button Keypad

        • Storage Compartment with Netting

      • POWER TRAIN

        • Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards

        • Air Cleaner, Dual Element, Radial Seal

        • S·O·SSM Sampling Valve, Hydraulic Oil

        • Filters, Cartridge-type, Hydraulic

        • Filters, Canister-type, Fuel and Water Separator

        • ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)

        • Spring Applied, Hydraulically Released Parking Brakes

        • Hydrostatic Transmission

        • Four Wheel Chain Drive

      • OTHER

        • Engine Enclosure, Lockable

        • Extended Life Antifreeze, –36° C (–33° F)

        • Machine Tie Down Points (6)

        • Support, Lift Arm

        • Hydraulic Oil Level Sight Gauge

        • Radiator Coolant Level Sight Gauge

        • Radiator, Expansion Bottle

        • Cat ToughGuard™ Hose

        • Auxiliary, Hydraulics, Continuous Flow

        • Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release

        • Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm

        • Electrical Outlet, Beacon

        • Belly Pan Cleanout

        • Variable Speed Demand Fan

        • Product Link™ PL240, Cellular

      • MANDATORY EQUIPMENT

        • Hydraulics, Standard or High Flow

        • Quick Coupler, Mechanical or Powered

        • Highly Visible Seat Belt, 50 mm (2 in) or 75 mm (3 in)

        • EU Preparation Package (Europe only)

        • Power Train: One Speed, One Speed with Ride Control, Two Speed

        • Tires, 10 × 16.5

        • PERFORMANCE PACKAGES: – Performance Package H1: Standard Flow Hydraulics (No Self Level) – Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) – Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)

        • COMFORT PACKAGES: – Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (High Back, Heated, Air Ride Seat) (No Heater or Door) – Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Air Conditioner, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)

      WHY CHOOSE EMPIRE

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance