THIS IS MY SELECT
Skid Steer Loaders
232D3 Skid Steer Loader
Gross Power - SAE J1995
67.1 HP
Rated Operating Capacity
1,900 lb
Operating Weight
6,514 lb
THIS IS MY SELECT
backhoe loader
232D3 Skid Steer Loader
Gross Power - SAE J1995
67.1 HP
Rated Operating Capacity
1,900 lb
Operating Weight
6,514 lb
Specifications
The Cat® 232D3 Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.
-
Operating Weight
6,514 lb
2,955 kg
Note
93.0 in
93.0 mm
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
-
Rated Operating Capacity
1,900 lb
865 kg
Tipping Load
3,800 lb
1,725 kg
Breakout Force - Tilt Cylinder
3,928 lb
1,782 kg
Rated Operating Capacity with Optional Counterweight
2,000 lb
910 kg
Note
93.0 in
93.0 mm
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
-
Wheel Base
41.5 in
1,054 mm
Height - Top of Cab
79.9 in
2,029 mm
Vehicle Width over Tires
58.9 in
1,497 mm
Ground Clearance
6.7 in
170 mm
Departure Angle
93.0 in
93.0 mm
27.9°
Maximum Dump Angle
93.0 in
93.0 mm
47.4°
Bucket Pin Reach - Maximum Lift
8.8 in
224 mm
Maximum Overall Height
150.9 in
3,832 mm
Turning Radius from Center - Machine Rear
59.6 in
1,513 mm
Bucket Pin Height - Carry Position
8.4 in
214 mm
Length - Without Bucket
99.3 in
2,523 mm
Length - With Bucket on Ground
127.3 in
3,233 mm
Bumper Overhang - Behind Rear Axle
35.2 in
894 mm
Turning Radius from Center - Bucket
77.8 in
1,976 mm
Maximum Reach - With Arms Parallel to Ground
49.2 in
1,249 mm
Bucket Pin Height - Maximum Lift
118.1 in
3,001 mm
Reach - Maximum Lift/Dump
25.7 in
653 mm
Rack Back Angle - Maximum Height
93.0 in
93.0 mm
88.2°
Turning Radius from Center - Coupler
43.4 in
1,102 mm
Clearance at Maximum Lift and Dump
88.7 in
2,254 mm
Note
93.0 in
93.0 mm
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
-
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min
99 l/min
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9 HP
38 kW
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
35.5 HP
26.5 kW
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3,336 psi
23,000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min
69 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3,336 psi
23,000 kPa
-
ROPS
93.0 in
93.0 mm
ISO 3471:2008
FOPS
93.0 in
93.0 mm
ISO 3449:2005 Level I
-
Travel Speed - Forward or Reverse - One Speed
7.6 mile/h
12.3 km/h
Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h
17.8 km/h
-
Cooling System
3.2 gal (US)
12 l
Engine Crankcase
2.6 gal (US)
10 l
Fuel Tank
15.1 gal (US)
57 l
Hydraulic System
11.9 gal (US)
45 l
Hydraulic Tank
9 gal (US)
34 l
Chain Box - Each Side
1.8 gal (US)
7 l
-
Gross Power - SAE J1995
67.1 HP
50.1 kW
Net Power - SAE 1349
65.8 HP
49.1 kW
Displacement
134.3 in³
2.2 l
Stroke
3.9 in
100 mm
Bore
3.3 in
84 mm
Net Power - ISO 9249
66.5 HP
49.6 kW
Net Flywheel Power
65.8 HP
49.1 kW
Peak Torque - 1,500 rpm - SAE J1995
153 ft·lbf
208 N·m
Engine Model
93.0 in
93.0 mm
Cat C2.2 CRDI
-
Air Conditioning
93.0 in
93.0 mm
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
-
Note (2)
93.0 in
93.0 mm
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (1)
93.0 in
93.0 mm
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Outside Cab**
93.0 in
93.0 mm
101 dB(A)
Inside Cab*
93.0 in
93.0 mm
83 dB(A)
Note (3)
93.0 in
93.0 mm
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
-
ELECTRICAL
-
12 volt Electrical System
-
80 ampere Alternator
-
Ignition Key Start/Stop Switch
-
Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light
-
Backup Alarm
-
Heavy Duty Battery, 850 CCA
-
-
OPERATOR ENVIRONMENT
-
Gauges: Fuel Level, Hour Meter
-
Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged
-
Fold In Ergonomic Contoured Armrest
-
Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
-
ROPS Cab, Open, Tilt Up
-
FOPS, Level I
-
Top and Rear Windows
-
Floor Mat
-
Interior Rearview Mirror
-
12 volt Electric Socket
-
Horn
-
Hand (Dial) Throttle, Electronic
-
Adjustable Joystick Controls
-
Anti-theft Security System with 6-button Keypad
-
Storage Compartment with Netting
-
-
POWER TRAIN
-
Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards
-
Air Cleaner, Dual Element, Radial Seal
-
S·O·SSM Sampling Valve, Hydraulic Oil
-
Filters, Cartridge-type, Hydraulic
-
Filters, Canister-type, Fuel and Water Separator
-
ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)
-
Spring Applied, Hydraulically Released Parking Brakes
-
Hydrostatic Transmission
-
Four Wheel Chain Drive
-
-
OTHER
-
Engine Enclosure, Lockable
-
Extended Life Antifreeze, –36° C (–33° F)
-
Machine Tie Down Points (6)
-
Support, Lift Arm
-
Hydraulic Oil Level Sight Gauge
-
Radiator Coolant Level Sight Gauge
-
Radiator, Expansion Bottle
-
Cat ToughGuard™ Hose
-
Auxiliary, Hydraulics, Continuous Flow
-
Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
-
Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
-
Electrical Outlet, Beacon
-
Belly Pan Cleanout
-
Variable Speed Demand Fan
-
Product Link™ PL240, Cellular
-
-
MANDATORY EQUIPMENT
-
Hydraulics, Standard or High Flow
-
Quick Coupler, Mechanical or Powered
-
Highly Visible Seat Belt, 50 mm (2 in) or 75 mm (3 in)
-
EU Preparation Package (Europe only)
-
Power Train: One Speed, One Speed with Ride Control, Two Speed
-
Tires, 10 × 16.5
-
PERFORMANCE PACKAGES: – Performance Package H1: Standard Flow Hydraulics (No Self Level) – Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) – Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
-
COMFORT PACKAGES: – Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (High Back, Heated, Air Ride Seat) (No Heater or Door) – Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Air Conditioner, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
-
Similar Models
WHY CHOOSE EMPIRE
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance