THIS IS MY SELECT

Underground Mining Load Haul Dump (LHD) Loaders

R1700 Underground Mining Loader

Engine Model

93.0 hp

Cat® C13

Gross Power - ISO 14396

361 HP

Nominal Payload Capacity

33,069 lb

THIS IS MY SELECT

backhoe loader

R1700 Underground Mining Loader

Engine Model

93.0 hp

Cat® C13

Gross Power - ISO 14396

361 HP

Nominal Payload Capacity

33,069 lb

Specifications

Our goal for the redesign of the R1700 was simple; add value, power and performance with safety at its core. With each cycle, the R1700 hauls 20 percent more payload, it loads, climbs, hauls and dumps quicker. It features three engine emission options that can be tailored to your mine’s ventilation requirements. The R1700 is a powerful new tool for mining.

      • Engine Model

        93.0 in

        93.0 mm

        Cat® C13

        Gross Power - ISO 14396

        361 HP

        269 kW

        Note (5)

        93.0 in

        93.0 mm

        Optional Ventilation Reduction package available.

        Note (1)

        93.0 in

        93.0 mm

        Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard.

        Note (6)

        93.0 in

        93.0 mm

        Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.

        Gross Power - VR Engine - ISO 14396

        361 HP

        269 kW

        Gross Power - EU Stage V Engine - ISO 14396

        345 HP

        257 kW

        Note (7)

        93.0 in

        93.0 mm

        Optional engine meeting the Tier 4 Final and Stage V emission standards is also available.

        Note (4)

        93.0 in

        93.0 mm

        No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines.

        Note (3)

        93.0 in

        93.0 mm

        All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F).

        Note (2)

        93.0 in

        93.0 mm

        Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard.

        Gross Power - Tier 3/Stage IIIA Equivalent Engine - ISO 14396

        361 HP

        269 kW

        Rated Power: Gross Power - Tier 3/Stage IIIA Equivalent Engine - ISO 14396

        361 HP

        269 kW

        Rated Power: Gross Power - Stage V Engine - ISO 14396

        345 HP

        257 kW

        Rated Power: Gross Power - VR Engine - ISO 14396

        361 HP

        269 kW

      • Fuel System

        128.4 gal (US)

        486 l

        DEF Tank

        7.1 gal (US)

        27 l

        Front Differential and Final Drive

        39 gal (US)

        148 l

        Rear Differential and Final Drive

        37.2 gal (US)

        141 l

        Transmission

        14.2 gal (US)

        54 l

      • Nominal Payload Capacity

        33,069 lb

        15,000 kg

        Gross Machine Mass - Loaded

        138,316 lb

        62,739 kg

        Static Tipping Load - Straight Ahead - Lift Arms Horizontal

        83,218 lb

        37,747 kg

        Static Tipping Load - Full Turn - Lift Arms Horizontal

        69,635 lb

        31,586 kg

        Breakout Force - Lift and Tilt

        53,330 lb

        24,190 kg

        Bucket Capacities

        93.0 in

        93.0 mm

        5.7-8.6 m³ (7.5-11.2 yd³)

        Rated Payload

        33,069 lb

        15,000 kg

      • Empty - Front Axle

        38,358 lb

        17,399 kg

        Empty - Rear Axle

        56,831 lb

        25,778 kg

        Loaded - Front Axle

        91,412 lb

        41,464 kg

        Loaded - Rear Axle

        36,846 lb

        16,713 kg

        Empty

        95,189 lb

        43,177 kg

        Loaded

        128,258 lb

        58,177 kg

      • Forward - 1

        3 mile/h

        4.9 km/h

        Forward - 2

        5.7 mile/h

        9.2 km/h

        Forward - 3

        10.2 mile/h

        16.4 km/h

        Forward - 4

        17.9 mile/h

        28.8 km/h

        Reverse - 1

        3.7 mile/h

        5.9 km/h

        Reverse - 2

        6.5 mile/h

        10.5 km/h

        Reverse - 3

        11.6 mile/h

        18.7 km/h

        Reverse - 4

        20.2 mile/h

        32.5 km/h

      • Raise

        6.8 s

        6.8 s

        Dump

        3.3 s

        3.3 s

        Lower, Empty, Float Down

        2.9 s

        2.9 s

        Total Cycle Time

        13.2 s

        13.2 s

      • Dump Bucket - 1 - Standard Bucket

        7.5 yd³

        5.7

        Dump Bucket - 2

        8 yd³

        6.1

        Dump Bucket - 3

        8.6 yd³

        6.6

        Dump Bucket - 4

        9.8 yd³

        7.5

        Dump Bucket - 5

        10.5 yd³

        8

        Light Material Bucket

        11.2 yd³

        8.6

        Ejector Bucket

        7.6 yd³

        5.8

        Bolt Together Bucket

        8.9 yd³

        6.8

      • Outside Clearance Radius

        270 in

        6,857 mm

        Inner Clearance Radius

        123.5 in

        3,139 mm

        Axle Oscillation

        93.0 in

        93.0 mm

        Articulation Angle

        93.0 in

        93.0 mm

        44°

      • Tire Size

        93.0 in

        93.0 mm

        26.5R25

      • Cooling System

        19.8 gal (US)

        75 l

        Engine Crankcase

        9.8 gal (US)

        37 l

        Hydraulic Tank

        35.7 gal (US)

        135 l

      • POWER TRAIN

        • Brake axle cooling

        • Brakes, full hydraulic enclosed wet multiple-disc (SAFR)

        • Engine: – Cat C13 6-cylinder diesel – Air-to-air aftercooler (ATAAC)

        • Filter, engine, remote mounted

        • Electric fuel priming pump

        • Oil filter, transmission oil, long life

        • Precleaner, engine air intake

        • Torque converter, lock-up clutch (LUC)

        • Transmission: – Electronic Clutch Pressure Control (ECPC) – Auto planetary powershift (4F/4R) – Transmission neutralizer

        • Traction control

      • ELECTRICAL

        • Alarm, reversing

        • Alternator, 150 amp

        • Battery disconnect switch, ground level

        • Batteries, low maintenance

        • Diagnostic connector

        • Engine shutdown switch

        • Lighting, external, front, rear (LED)

        • Lighting, stop, dual (LED)

        • Receptacle, auxiliary start

        • Starter, electric, 24-volt

        • Starting and charging system

        • Reverse alarm

      • OPERATOR ENVIRONMENT

        • Cab, ROPS/FOPS certified.

        • Color Multi Purpose Display (CMPD): – Front and rear brake gauges – Transmission pressure – System diagnostics – Residual brake warning

        • Horns, electric

        • Instrumentation/gauges: – Speedometer/tachometer – Fuel level – Hydraulic oil temperature – Engine coolant temperature

        • Operator presence system

        • Automatic Brake Application (ABA)

        • Light, warning, residual brake

        • Monitor, door latch

        • Electrohydraulic implement controls (single joystick)

        • Seat belt, retractable

        • Mounts, radio and speaker (×2)

        • Control units, roof mounted (with service panel access)

        • Storage box, enclosed, 5 L (3 gal)

        • Coat hook

        • Cup holder

        • Armrests and kneepads, independently adjustable

      • TIRES, RIMS, AND WHEELS

        • Tires must be selected from the Mandatory Attachments section

        • Rims (set of four): – Five piece

      • OTHER STANDARD EQUIPMENT

        • Dump bucket

        • Fenders, front, rear

        • Firewall

        • Fuel tap, manual shutoff

        • Guards, engine and transmission

        • Lift arm positioner for return to dig

        • Radiator grill, swing out

        • Service oil sample

        • Handholds

        • Wear bars: – Fuel tank – Hydraulic

        • Operation and Maintenance Manual – English and other languages

        • Brake lights

        • Product Link Elite System

      • CHOOSE BETWEEN:

        • Engines: 1. Ventilation Reduction C13 2. Tier 3/Stage IIIA Equivalent C13 3. Stage V C13

        • Cab: 1. Enclosed 2. Open

        • Windows: 1. Single pane 2. Dual pane

        • Seats: 1. Tee seat (with suspension) 2. Seat (with suspension)

      WHY CHOOSE EMPIRE

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance