THIS IS MY SELECT

Underground Mining Load Haul Dump (LHD) Loaders

R2900 Underground LHD Loader

Engine Model

93.0 hp

Cat® C15

Gross Power - ISO 14396

409 HP

Nominal Payload Capacity

37,920 lb

THIS IS MY SELECT

backhoe loader

R2900 Underground LHD Loader

Engine Model

93.0 hp

Cat® C15

Gross Power - ISO 14396

409 HP

Nominal Payload Capacity

37,920 lb

Specifications

Our most popular LHD model is available with the latest emission control solutions. With its advanced, EU Stage V compliant engine and aftertreatment, the new R2900 helps improve the underground air quality, is quiet, and stays true to its heritage of long-term durability and performance.
The R2900 is a powerful new tool for underground mining.

      • Engine Model

        93.0 in

        93.0 mm

        Cat® C15

        Gross Power - ISO 14396

        409 HP

        305 kW

        Bore

        5.4 in

        137.2 mm

        Stroke

        6.8 in

        171.5 mm

        Displacement

        927.6 in³

        15.2 l

        Net Power - EU Stage V Engine - SAE J1349

        377 HP

        281 kW

        Gross Power - EU Stage V Engine - ISO 14396

        393 HP

        293 kW

        Note (6)

        93.0 in

        93.0 mm

        Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.

        Note (7)

        93.0 in

        93.0 mm

        Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.

        Note (3)

        93.0 in

        93.0 mm

        All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F).

        Net Power - Tier 3/Stage IIIA Equivalent Engine - SAE J1349

        384 HP

        286 kW

        Net Power - VR Engine - SAE J1349

        384 HP

        286 kW

        Note (4)

        93.0 in

        93.0 mm

        Minimal engine derating* required up to 2926 m (9600 ft) at rated speed for Stage V engines, 3048 m (10,000 ft) altitude for Tier 3/Stage IIIA equivalent engines, and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines. (*<5%)

        Gross Power - VR Engine - ISO 14396

        409 HP

        305 kW

        Note (2)

        93.0 in

        93.0 mm

        Power ratings apply at a rated speed of 2,000 rpm for Stage V model engine when tested under the reference conditions for the specified standard.

        Note (5)

        93.0 in

        93.0 mm

        Optional Ventilation Reduction Package available.

        Gross Power - Tier 3/Stage IIIA Equivalent Engine - ISO 14396

        409 HP

        305 kW

        Note (1)

        93.0 in

        93.0 mm

        Power ratings apply at a rated speed of 1,800 rpm for VR and Tier 3 equivalent model when tested under the reference conditions for the specified standard.

      • Tire Size

        93.0 in

        93.0 mm

        29.5 R29

      • Rear Differential and Final Drives - With Axle Oil Cooling System

        44.1 gal (US)

        167 l

        Front Differential and Final Drives - With Axle Oil Cooling System

        42 gal (US)

        159 l

        Fuel Tank

        166 gal (US)

        630 l

        Engine Crankcase

        9 gal (US)

        34 l

        DEF Tank

        8.5 gal (US)

        32 l

        Cooling System

        19.8 gal (US)

        75 l

        Front Differential and Final Drives

        31.4 gal (US)

        119 l

        Transmission

        16.4 gal (US)

        62 l

        Hydraulic Tank

        37 gal (US)

        140 l

        Rear Differential and Final Drives

        33.5 gal (US)

        127 l

      • Standards

        93.0 in

        93.0 mm

        ROPS/FOPS Certified Cab

      • Nominal Payload Capacity

        37,920 lb

        17,200 kg

        Gross Machine Mass

        162,736 lb

        73,816 kg

        Static Tipping Load - Straight Ahead - Lift Arms Horizontal

        94,106 lb

        42,686 kg

        Static Tipping Load - Full Turn - Lift Arms Horizontal

        80,686 lb

        36,599 kg

        Shipping Mass

        125,203 lb

        56,791 kg

        Rated Payload

        37,320 lb

        17,200 kg

        Breakout Force - Tilt (ISO)

        60,298 lb

        27,346 kg

        Breakout Force - Lift (ISO)

        50,062 lb

        22,704 kg

      • Dump Bucket - 2 - Standard Bucket

        9.4 yd³

        7.2

        Dump Bucket - 1

        8.2 yd³

        6.3

        Dump Bucket - 4

        11.6 yd³

        8.9

        Dump Bucket - 3

        10.9 yd³

        8.3

        Bucket Capacities

        93.0 in

        93.0 mm

        6.3-8.9 m³ (8.2-11.6 yd³)

      • Note

        93.0 in

        93.0 mm

        The declared sound levels listed are for standard machine configurations, measured according to ISO6395:2008 and ISO6396:2008 and include measurement uncertainty due to the production variation.

        Cab Sound Pressure Level

        93.0 in

        93.0 mm

        80.9 +/- 2.5 dB(A)

        Machine Sound Power Level

        93.0 in

        93.0 mm

        116.8 +/- 2.5 dB(A)

      • Operating Mass* - Rear Axle

        64,214 lb

        29,127 kg

        Operating Mass + Rated Payload* - Rear Axle

        42,807 lb

        19,417 kg

        Operating Mass*

        114,837 lb

        52,089 kg

        Operating Mass + Rated Payload*

        152,756 lb

        69,289 kg

        Operating Mass* - Front Axle

        50,623 lb

        22,962 kg

        Note

        93.0 in

        93.0 mm

        *Calculated Weight.

        Operating Mass + Rated Payload* - Front Axle

        109,949 lb

        49,872 kg

      • Forward - 1

        3.2 mile/h

        5.1 km/h

        Forward - 2

        6 mile/h

        9.7 km/h

        Forward - 3

        10.7 mile/h

        17.3 km/h

        Forward - 4

        18.9 mile/h

        30.4 km/h

        Reverse - 1

        4.1 mile/h

        6.6 km/h

        Reverse - 2

        7.5 mile/h

        12 km/h

        Reverse - 3

        13.4 mile/h

        21.5 km/h

        Reverse - 4

        20.4 mile/h

        32.8 km/h

      • Raise

        9.2 s

        9.2 s

        Dump

        3.4 s

        3.4 s

        Lower, Empty, Float Down

        3.1 s

        3.1 s

        Total Cycle Time

        15.7 s

        15.7 s

      • Relief Valve Setting - Main

        3,408 psi

        23,500 kPa

        Lift/Tilt System - Pump

        93.0 in

        93.0 mm

        Fixed Displacement Gear Pump

        Tilt Cylinder - Bore

        10.5 in

        267 mm

        Tilt Cylinder - Stroke

        21.5 in

        546 mm

        Lift Cylinder - Bore

        9.1 in

        230 mm

        Lift/Tilt System - Circuit

        93.0 in

        93.0 mm

        Open Centre, Pilot Control

        Maximum Flow at 2,120 rpm

        116.2 gal/min

        440 l/min

        Lift Cylinder - Stroke

        29.4 in

        747 mm

      • Axle Oscillation

        93.0 in

        93.0 mm

        Articulation Angle

        93.0 in

        93.0 mm

        42.5°

        Inner Clearance Radius**

        133.9 in

        3,401 mm

        Note

        93.0 in

        93.0 mm

        **Clearance dimensions are for reference only.

        Outside Clearance Radius**

        288.3 in

        7,323 mm

      • ELECTRICAL

        • 12V Power Supply in Cab

        • Alternator, 150-amp

        • Auxiliary Start Receptacle

        • Battery Disconnect Switch, Ground Level

        • Circuit Breaker, 80-amp

        • Corrosive Protection Spray

        • Diagnostic Connector

        • Electric Starting, 24-volt

        • Engine Shutdown Switches – Rear Right Hand Side – Rear Left Hand Side

        • External LED Lighting System, Front, Rear, Stop light, dual

        • Low Maintenance Batteries

        • Reversing Alarm

        • Starting and Charging System

      • OPERATOR ENVIRONMENT

        • Cat Electronic Monitoring System (Cat EMS)

        • Electric Horns

        • Gauges – Engine Coolant Temperature – Transmission Coolant Temperature – Hydraulic Oil Temperature – Fuel Level – Speedometer – Tachometer

        • Indicator Lights – Alert Warning Light – Residual Brake Pressure

        • Low Hydraulic Level Warning

        • Open Operator Station ROPS/FOPS Structure

        • Operator Presence System (Auto Park Brake)

        • Pilot Hydraulic Implement Controls, Single Joystick

        • Push Button Panel for Lights

        • Suspension Seat with Retractable Seat Belt

        • STIC Steering

      • POWER TRAIN

        • Cat C15 ATAAC Diesel Engine, 6-Cylinder

        • Brake Axle Cooling

        • Electric Fuel Priming Pump

        • Engine Air Intake Precleaner

        • Engine Oil Filter, Remote Mounted

        • Heat Shields

        • Long Life Coolant

        • Planetary Powershift Transmission with Automatic Shift Control, 4 Speed Forward/4 Speed Reverse

        • Radiator, Cross Flow

        • Radiator Cap Manual Release

        • Rims, 5-Piece, Tubeless

        • SAFR™ Full Hydraulic Enclosed Wet Multiple-Disc Brakes

        • Torque Converter with Automatic Lockup Clutch

        • Transmission Neutralizer

        • Transmission Filter Drain Tap

      • OTHER STANDARD EQUIPMENT

        • Brake Light

        • Bucket, Dump

        • Bucket Lip, Hardox 450 Bucket

        • Bucket Positioner, Return To Dig

        • Catalytic Exhaust Purifier/Muffler Group

        • Decals, International Picto Graphics

        • Fuel System – Single Fuel Tank, Bolt-In – Fuel System Manual Shut Off Taps

        • Engine and Transmission Belly Guards

        • Fenders, Front, Rear

        • Firewall

        • Handrails – Hand Hold (Acces On/Off Top Deck) – Fold Down

        • Operation and Maintenance Manual – English and other applicable local languages to select

        • Protection Wear Bars 100 × 50 mm (4 × 2 in)

        • Semi Centralized Lubrication Points

        • Rim, 5-Piece, Tubeless

        • S·O·S port – Coolant – Engine Oil – Hydraulic Oil – Transmission Oil

        • Swing Out Radiator Grill

        • Tires and Rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

      WHY CHOOSE EMPIRE

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance