THIS IS MY SELECT

Underground Mining Load Haul Dump (LHD) Loaders

R3000H Underground Mining Loader

Engine Model

93.0 hp

Cat® C15

Gross Power - SAE J1995

409 HP

Nominal Payload Capacity

44,092 lb

THIS IS MY SELECT

backhoe loader

R3000H Underground Mining Loader

Engine Model

93.0 hp

Cat® C15

Gross Power - SAE J1995

409 HP

Nominal Payload Capacity

44,092 lb

Specifications

The R3000H underground loader is designed to meet the challenges of the most demanding underground mining applications. Compact design with agile performance, rugged construction and simplified maintenance ensures excellent productivity, long life and low operating costs.
Engineered for performance, designed for comfort, built to last.

      • Engine Model

        93.0 in

        93.0 mm

        Cat® C15

        Gross Power - SAE J1995

        409 HP

        305 kW

        Bore

        5.4 in

        137.2 mm

        Stroke

        6.8 in

        171.5 mm

        Displacement

        927.6 in³

        15.2 l

        Note (1)

        93.0 in

        93.0 mm

        Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.

        Note (2)

        93.0 in

        93.0 mm

        Ratings based on ISO 14396 standard air conditions of 25° C (77° F) and 100 kPa (29.61 inHg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).

        Gross Power - Tier 3 Engine - SAE J1995

        409 HP

        305 kW

        Gross Power - VR Engine - SAE J1995

        409 HP

        305 kW

        Gross Power - Equivalent to U.S. EPA Tier 3/EU Stage IIIA - SAE J1995

        409 HP

        305 kW

        Note (4)

        93.0 in

        93.0 mm

        Optional Ventilation Reduction package available.

        Note (5)

        93.0 in

        93.0 mm

        Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.

        Rated Power

        1,800 r/min

        1,800 r/min

        Note (3)

        93.0 in

        93.0 mm

        No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines.

      • Rear Differential and Final Drives - With Axle Oil Cooling System

        44.1 gal (US)

        167 l

        Front Differential and Final Drives - With Axle Oil Cooling System

        42 gal (US)

        159 l

        Engine Crankcase

        9 gal (US)

        34 l

        Fuel Tank

        406.5 gal (US)

        1,539 l

        Hydraulic Tank

        37 gal (US)

        140 l

        Front Differential and Final Drives

        31.4 gal (US)

        119 l

        Rear Differential and Final Drives

        33.5 gal (US)

        127 l

        Cooling System

        19.8 gal (US)

        75 l

        Transmission

        16.4 gal (US)

        62 l

      • Standards

        93.0 in

        93.0 mm

        ROPS/FOPS Certified Cab

      • Nominal Payload Capacity

        44,092 lb

        20,000 kg

        Static Tipping Load - Straight Ahead - Lift Arms Horizontal

        104,199 lb

        47,264 kg

        Breakout Force - SAE

        61,773 lb

        28,020 kg

        Gross Machine Mass

        180,779 lb

        82,000 kg

        Static Tipping Full Turn Ahead Lift Arms Horizontal

        88,191 lb

        40,003 kg

      • Empty

        128,448 lb

        58,263 kg

        Loaded

        172,540 lb

        78,263 kg

        Loaded - Rear Axle

        47,316 lb

        21,462 kg

        Empty - Front Axle

        54,558 lb

        24,747 kg

        Empty - Rear Axle

        73,853 lb

        33,499 kg

        Loaded - Front Axle

        125,187 lb

        56,784 kg

      • Forward - 1

        3 mile/h

        4.9 km/h

        Forward - 2

        5.7 mile/h

        9.1 km/h

        Forward - 3

        10.2 mile/h

        16.4 km/h

        Forward - 4

        17.5 mile/h

        28.2 km/h

        Reverse - 1

        4.1 mile/h

        6.6 km/h

        Reverse - 2

        7.1 mile/h

        11.5 km/h

        Reverse - 3

        12.7 mile/h

        20.5 km/h

        Reverse - 4

        19.4 mile/h

        31.3 km/h

      • Raise

        8.8 s

        8.8 s

        Dump

        1.85 s

        1.85 s

        Lower, Empty, Float Down

        3.54 s

        3.54 s

        Total Cycle Time

        14.2 s

        14.2 s

      • Bucket Capacities

        93.0 in

        93.0 mm

        8.9-11.6 m³ (11.6-15.2 yd³)

        Dump Bucket - 3

        13.7 yd³

        10.5

        Light Material Bucket

        15.2 yd³

        11.6

        Dump Bucket - 1 - Standard Bucket

        11.6 yd³

        8.9

        Dump Bucket - 2

        12.4 yd³

        9.5

      • Axle Oscillation

        8 °

        8 °

        Articulation Angle

        42.5 °

        42.5 °

        Outside Clearance Radius**

        296.7 in

        7,536 mm

        Inner Clearance Radius**

        127.8 in

        3,247 mm

        Note

        93.0 in

        93.0 mm

        **Clearance dimensions are for reference only.

      • Tire Size

        93.0 in

        93.0 mm

        35/65 R33 VSNT

      • ELECTRICAL

        • 12V Power Supply in Cab

        • Alternator, 95-amp

        • Auxiliary Start Receptacle

        • Battery Disconnect Switch, Ground Level

        • Circuit Breaker, 80-amp

        • Corrosive Protection Spray

        • Diagnostic Connector

        • Electric Starting, 24-volt

        • Engine Shutdown Switches: – Rear Right Hand Side

        • External Lighting System, Front, Rear, Halogen Work Lights

        • Low Maintenance Batteries

        • Reversing Alarm

        • Starting and Charging System

      • OPERATOR ENVIRONMENT

        • Cat Electronic Monitoring System (Cat EMS)

        • Electric Horns

        • Gauges: – Engine Coolant Temperature – Transmission Coolant Temperature – Hydraulic Oil Temperature – Fuel Level – Speedometer – Tachometer

        • Indicator Lights: – Alert Warning Light – Residual Brake Pressure

        • Low Hydraulic Level Warning

        • Operators Station, Enclosed ROPS/FOPS Structure: – Air Conditioning – Cab Pressurizer and Filter – Dome Light – Heater – Radio Ready Compartment for Radio and Speakers

        • Operator Presence System (Auto Park Brake)

        • Pilot Hydraulic Implement Controls, Single Joystick

        • Push Button Panel for Lights

        • Suspension Seat with Retractable Seat Belt

        • STIC Steering

      • POWER TRAIN

        • Cat C15 ATAAC Diesel Engine, 6-Cylinder

        • Brake Axle Cooling

        • Electric Fuel Priming Pump

        • Engine Air Intake Precleaner

        • Engine Oil Filter, Remote Mounted

        • Heat Shields

        • Long Life Coolant

        • Planetary Powershift Transmission with Automatic Shift Control, 4 Speed Forward/4 Speed Reverse

        • Radiator, Cross Flow

        • Radiator Cap Manual Release

        • Rims, 5-Piece, Tubeless

        • SAFR™ Full Hydraulic Enclosed Wet Multiple-Disc Brakes

        • Torque Converter with Automatic Lockup Clutch

        • Transmission Neutralizer

        • Transmission Filter Drain Tap

      • OTHER STANDARD EQUIPMENT

        • Brake Light

        • Bucket, Dump

        • Bucket Lip, Hardox 450 Bucket

        • Bucket Positioner, Return to Dig

        • Catalytic Exhaust Purifier/Muffler Group

        • Decals, International Picto Graphics

        • Fuel System: – Dual Fuel Tanks – Fuel System Manual Shut Off Taps

        • Engine and Transmission Belly Guards

        • Fenders, Front, Rear

        • Firewall

        • Hand Hold (Access On/Off Top Deck)

        • Operation and Maintenance Manual – English and other applicable local languages to select

        • Protection Wear Bars 100 × 50 mm (4 × 2 in)

        • Semi Centralized Lubrication Points

        • S·O·S port – Coolant – Engine Oil – Hydraulic Oil – Transmission Oil

        • Swing Out Radiator Grill

        • Tires and Rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

      WHY CHOOSE EMPIRE

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance