THIS IS MY SELECT
Underground Mining Trucks
AD45 Underground Articulated Truck
Engine Model
93.0 hp
Cat® C18
Engine Gross Power - ISO 14396
599 HP
Nominal Payload Capacity
99,208 lb
THIS IS MY SELECT
backhoe loader
AD45 Underground Articulated Truck
Engine Model
93.0 hp
Cat® C18
Engine Gross Power - ISO 14396
599 HP
Nominal Payload Capacity
99,208 lb
Specifications
The new AD45 underground articulated truck is powered by Cat C18 ® engine with scalable emission solutions. The truck delivers proven operating efficiency with improvements of serviceability. The AD45 is a powerful new tool for underground mining.
-
Engine Model
93.0 in
93.0 mm
Cat® C18
Engine Gross Power - ISO 14396
599 HP
447 kW
Bore
5.7 in
145 mm
Stroke
7.2 in
183 mm
Displacement
1,104.53 in³
18.1 l
Note (2)
93.0 in
93.0 mm
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F).
Emissions - U.S. EPA Tier 3/EU Stage IIIA Equivalent Engine - Engine Power - ISO 14396:2002
589 HP
439 kW
Note (7)
93.0 in
93.0 mm
*<5 %
Emissions - Ventilation Reduction (VR) Engine - Engine Power - ISO 14396:2002
589 HP
439 kW
Emissions - U.S. EPA Tier 3/EU Stage IIIA Equivalent Engine - Net Power - SAE J1349:2011
563 HP
420 kW
Note (5)
93.0 in
93.0 mm
Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
Note (4)
93.0 in
93.0 mm
Optional Ventilation Reduction Package available.
Note (3)
93.0 in
93.0 mm
Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.
Note (1)
93.0 in
93.0 mm
Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
Emissions - EU Stage V Engine - Net Power - SAE J1349:2011
573 HP
427 kW
Emissions - EU Stage V Engine - Engine Power - ISO 14396:2002
599 HP
447 kW
Emissions - Ventilation Reduction (VR) Engine - Net Power - SAE J1349:2011
563 HP
420 kW
Note (6)
93.0 in
93.0 mm
Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
-
Lower
93.0 in
93.0 mm
21 Seconds
Total Cycle Time
93.0 in
93.0 mm
35 Seconds
Raise
93.0 in
93.0 mm
14 Seconds
-
Ejector Body
29.9 yd³
22.9 m³
Dump Body - 2 - Standard
27.9 yd³
21.3 m³
Dump Body - 1
23.6 yd³
18 m³
Dump Body - 3
32.8 yd³
25.1 m³
Note
93.0 in
93.0 mm
Heaped SAE 2:1.
-
Articulation Angle
93.0 in
93.0 mm
42.5°
Inside Clearance Radius*
209 in
5,310 mm
Outside Clearance Radius*
371 in
9,420 mm
Frame Oscillation
93.0 in
93.0 mm
10°
Note
93.0 in
93.0 mm
*Clearance dimensions are for reference only.
-
Engine Crankcase - With Filter
16.9 gal (US)
64 l
Transmission
15.9 gal (US)
60 l
Hydraulic Tank
70.3 gal (US)
266 l
Cooling System
22.5 gal (US)
85 l
Front Differential and Final Drives
20.3 gal (US)
77 l
Rear Differential and Final Drives
21.9 gal (US)
83 l
Fuel Tank
201.8 gal (US)
764 l
-
Tire Size
93.0 in
93.0 mm
29.5 × R29
-
Standards
93.0 in
93.0 mm
ROPS/FOPS Certified Cab
-
Nominal Payload Capacity
99,208 lb
45,000 kg
Gross Machine Mass
196,765 lb
89,250 kg
Shipping Mass (Other Engine Models)
94,415 lb
42,825 kg
Shipping Mass (Stage V Engine Model)
96,225 lb
43,645 kg
Body Capacities
93.0 in
93.0 mm
18.0-25.1 m³ (23.5-32.8 yd³)
-
Operating Mass + Rated Payload - Rear Axle
101,260 lb
45,930 kg
Operating Mass
91,285 lb
41,405 kg
Operating Mass - Rear Axle
26,720 lb
12,120 kg
Operating Mass + Rated Payload
190,495 lb
86,405 kg
Operating Mass - Front Axle
64,565 lb
29,285 kg
Operating Mass + Rated Payload - Front Axle
89,235 lb
40,475 kg
-
Operating Mass - Front Axle
61,225 lb
27,770 kg
Operating Mass + Rated Payload
187,530 lb
85,060 kg
Operating Mass + Rated Payload - Rear Axle
102,175 lb
46,345 kg
Operating Mass - Rear Axle
27,095 lb
12,290 kg
Operating Mass + Rated Payload - Front Axle
85,355 lb
38,715 kg
Operating Mass
88,320 lb
40,060 kg
-
Empty - Front Axle
93.0 in
93.0 mm
70.7%
Loaded - Rear Axle
93.0 in
93.0 mm
53.2%
Empty - Rear Axle
93.0 in
93.0 mm
29.3%
Loaded - Front Axle
93.0 in
93.0 mm
46.8%
-
Loaded - Rear Axle
93.0 in
93.0 mm
54.5%
Empty - Rear Axle
93.0 in
93.0 mm
30.7%
Loaded - Front Axle
93.0 in
93.0 mm
45.5%
Empty - Front Axle
93.0 in
93.0 mm
69.3%
-
Forward - 1
4.4 mile/h
7 km/h
Forward - 2
5.9 mile/h
9.5 km/h
Forward - 3
8 mile/h
12.9 km/h
Forward - 4
10.8 mile/h
17.3 km/h
Forward - 5
14.6 mile/h
23.5 km/h
Forward - 6
19.7 mile/h
31.7 km/h
Forward - 7
26.4 mile/h
42.4 km/h
Reverse - 1
4.2 mile/h
6.8 km/h
Reverse - 2
5.6 mile/h
9 km/h
Note
93.0 in
93.0 mm
Maximum travel speeds with standard 29.5 × R29 tires.
-
Differential Ratio
93.0 in
93.0 mm
3.46:1
Final Drive Ratio
93.0 in
93.0 mm
5.65:1
Total Reduction Ratio
93.0 in
93.0 mm
19.55:1
-
Lower
93.0 in
93.0 mm
21 Seconds
Raise
93.0 in
93.0 mm
15 Seconds
Total Cycle Time
93.0 in
93.0 mm
36 Seconds
-
ELECTRICAL
-
12V power supply in cab
-
Alternator, 95-amp
-
Auxiliary start receptacle
-
Battery disconnect switch, ground level
-
Circuit breaker, 80-amp
-
Corrosive protection spray
-
Diagnostic connector
-
Electric starting, 24V
-
Engine shutdown switch, ground level – Front left hand side
-
Lighting – Headlights with dimmer switch, LED – Brake and tail lights – Rear work light (cab mounted), LED – Reversing lights, LED
-
Low maintenance batteries
-
Reversing alarm
-
Starting and charging system
-
-
OPERATOR ENVIRONMENT
-
Cat Electronic Monitoring System (Cat EMS)
-
Electric horns
-
Gauges – Engine coolant temperature – Transmission coolant temperature – Hydraulic oil temperature – Fuel level – Speedometer – Tachometer
-
Indicator lights – Alert warning light – Body up position warning – High beam – Residual brake pressure warning – Retarder application – Turn signal
-
Low hydraulic level warning
-
Open operator station ROPS/FOPS structure
-
Operator presence system (auto park brake)
-
Rearview mirrors
-
Suspension seat Cat Comfort TLV2 with retractable seat belt
-
Trainer/passenger seat and seat belt
-
Tilt/telescopic steering wheel
-
Turn signal indicators
-
-
POWER TRAIN
-
Cat C18 ATAAC diesel engine, 6-cylinder
-
Automatic brake retarder control
-
Auto shift transmission 7 speed forward/2 speed reverse
-
Control throttle shifting
-
Engine air intake precleaner
-
Electric fuel priming pump
-
Exhaust, turbo compartment shielding
-
Four wheel drive
-
Long life coolant
-
Programmable ground speed limiting
-
Programmable gear block out with tray up
-
Radiator cap manual release
-
Radiator, cross flow
-
SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled
-
Torque converter, standard with automatic lockup
-
-
OTHER STANDARD EQUIPMENT
-
Body, dump, (21.3 m³, 27.9 yd³)
-
Catalytic exhaust purifier/muffler group
-
Centralized lubrication points
-
Decals, international picto graphics
-
Dual fuel tanks
-
Engine and transmission belly guards
-
Fenders, front, rear flaps
-
Fire wall
-
Fuel system manual shut off tap
-
Front axle suspension
-
Frame lifting lugs
-
Front and rear tow pin
-
Front rubber bumpers
-
Gauges, brake pressure
-
Hand hold (access on/off top deck)
-
Hitch, articulated and oscillated
-
Operation and Maintenance Manual – English and other applicable local languages to select
-
S·O·S port – Coolant – Engine oil – Hydraulic oil – Transmission oil
-
Swing out radiator grill
-
Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.
-
Similar Models
WHY CHOOSE EMPIRE
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance