THIS IS MY SELECT

Shearers

EL1000 Longwall Shearer

Seam Range

93.0 hp

1.6-3.9 m (63-156 in)

Haulage Power

93.0 hp

2 × 100 kW @ 50 Hz (2 × 134 hp @ 60 Hz)

Cutting Power

93.0 hp

2 × 500 kW @ 50 Hz (2 × 805 hp @ 60 Hz)

THIS IS MY SELECT

backhoe loader

EL1000 Longwall Shearer

Seam Range

93.0 hp

1.6-3.9 m (63-156 in)

Haulage Power

93.0 hp

2 × 100 kW @ 50 Hz (2 × 134 hp @ 60 Hz)

Cutting Power

93.0 hp

2 × 500 kW @ 50 Hz (2 × 805 hp @ 60 Hz)

Specifications

The Cat EL1000 features a robust, modular design, designed for top productivity, enhanced safety and the best reliability in the industry. Using high cutting and haulage power, this compact powerhouse makes maximum impact in low and medium coal seams. Equipped with a state-of-the-art automation, it delivers efficient cycle times and cutting consistency with face alignment and horizon control.

      • Seam Range

        93.0 in

        93.0 mm

        1.6-3.9 m (63-156 in)

        Haulage Power

        93.0 in

        93.0 mm

        2 × 100 kW @ 50 Hz (2 × 134 hp @ 60 Hz)

        Cutting Power

        93.0 in

        93.0 mm

        2 × 500 kW @ 50 Hz (2 × 805 hp @ 60 Hz)

        Typical Machine Length

        46.16 ft

        14 m

        Haulage System

        93.0 in

        93.0 mm

        2 × 85 kW (2 × 115 hp)

        Installed Power

        1,897 HP

        1,200 kW

      • Type

        93.0 in

        93.0 mm

        Flameproof module containing the main 253 kVA haulage transformer, power supplies, auxiliary transformer, drive system circuit breaker, hydraulic pump motor, and a 250 kW (335 hp) 600V AC inverter drive with integrated regenerative breaking.

      • Type (1)

        93.0 in

        93.0 mm

        This model of shearer is available with headlights, cameras, methane monitoring, end displays and audible alarms.

        Type (2)

        93.0 in

        93.0 mm

        All electrical material is designed and certified to IEC standards and also complies with other regional and national standards, such as MSHA, GOST, MA, ATEX and DGMS, as well as Australia’s New South Wales and Queensland regulations.

      • Type (2)

        93.0 in

        93.0 mm

        The hoses are assembled to Hose Assembly Standard DIN 20066.

        Type (1)

        93.0 in

        93.0 mm

        All Cat hose assemblies are designed according to ISO 6805 and proof tested according to EN ISO 1402.

        Type (3)

        93.0 in

        93.0 mm

        Hose selection and routing per industry standard best practices (including MDG41, ISO 17165-2 and SAE J1273)

        Type (4)

        93.0 in

        93.0 mm

        Cat hoses are aligned with the standards of MSHA, DGMS and MA

      • Type (3)

        93.0 in

        93.0 mm

        Hose selection and routing per industry standard best practices (including MDG41, ISO 17165-2 and SAE J1273).

        Type (5)

        93.0 in

        93.0 mm

        Stainless steel fittings (optional)

        Type (4)

        93.0 in

        93.0 mm

        Cat hoses are aligned with the standards of MSHA, DGMS and MA

        Type (1)

        93.0 in

        93.0 mm

        All Cat hose assemblies are designed according to ISO 6805 and proof tested according to EN ISO 1402.

        Type (2)

        93.0 in

        93.0 mm

        The hoses are assembled to Hose Assembly Standard DIN 20066.

        Type (6)

        93.0 in

        93.0 mm

        Onboard water filtration (optional)

      • Available Solutions

        93.0 in

        93.0 mm

        Wide range of dust suppression solutions available: – Body sprays – Spray booms – Sloughing plate sprays – Spray rings (in place of cowls) – Shearer cleaners

      • Type

        93.0 in

        93.0 mm

        A comprehensive health monitoring system is available, including oil levels and temperatures, flows, pressures and vibration analysis.

      • Type (6)

        93.0 in

        93.0 mm

        Machine performance algorithm “advanced motor and speed control” for increased machine uptime, coal production and longer service life

        Type (4)

        93.0 in

        93.0 mm

        Control system architecture with backup functionality

        Level of Automation (1)

        93.0 in

        93.0 mm

        Shearer automation levels available: – Standard Machine Control – Basic Automation – Advanced Automation (including face alignment horizon control)

        Type (2)

        93.0 in

        93.0 mm

        Modular design allows individual configuration (from basic monitoring and protection to advanced automation) to meet customer requirements

        Type (7)

        93.0 in

        93.0 mm

        Horizon Control from PMC-R Controls to allow corrections to Floor and Roof drum cutting heights (optional)

        Type (1)

        93.0 in

        93.0 mm

        Distributed, high-performance PMC-S control system for machine control, health monitoring, system protection and predictive maintenance

        Type (3)

        93.0 in

        93.0 mm

        Fast Ethernet Broadband communication allows enhanced diagnostics and analysis

        Type (5)

        93.0 in

        93.0 mm

        Widespread use of intrinsically safe components for improved serviceability and maintenance

        Type (8)

        93.0 in

        93.0 mm

        Shearer Remote Operation to allow machine control from a safe remote location outside the face (optional)

        Level of Automation (2)

        93.0 in

        93.0 mm

        Pan Angle Measurement System (PAMS) enabling fully automated gate end cutting sequences without machine operator interactions (optional)

      • Type (2)

        93.0 in

        93.0 mm

        Color graphic display

        Type (1)

        93.0 in

        93.0 mm

        Lightweight handheld device

        Type (3)

        93.0 in

        93.0 mm

        Tilt, drop and impact detection

      • Seam Range

        93.0 in

        93.0 mm

        1.6-3.9 m (63-154 in)

        Installed Power

        93.0 in

        93.0 mm

        1230 kW (1,649 hp)

        Typical Machine Length - Drum Centers

        45.25 ft

        13,780 mm

        Available Cutting Power

        93.0 in

        93.0 mm

        2 × 500 kW (2 × 671 hp)

        Cutting Drum Diameter

        93.0 in

        93.0 mm

        1500 to 2000 mm (59 to 79 in)

        Cutting Drum Speed

        93.0 in

        93.0 mm

        33.5, 38.8 and 43.8 rpm

        Haulage Control

        93.0 in

        93.0 mm

        AC inverter drive

        Haulage Speed

        93.0 in

        93.0 mm

        Up to 29.5 m/min (Up to 97 ft/min)

        Haulage Pull

        93.0 in

        93.0 mm

        Up to 622.3 kN (Up to 62.5 tons)

        Pump Motor

        40.2 HP

        30 kW

        Body Height

        21.6 in

        550 mm

        Machine Weight - Approximate

        66 ton (US)

        60 t

        Operating Voltage

        3,300 V

        3,300 V

        Minimum Pan Width

        32.7 in

        832 mm

        Haulage Power

        93.0 in

        93.0 mm

        2 × 100 kW (2 × 134 hp)

      • Seam Range

        93.0 in

        93.0 mm

        1.6-4.0 m (63-156 in)

        Typical Machine Length - Drum Centers

        45.25 ft

        13,780 mm

        Installed Power

        93.0 in

        93.0 mm

        1435 kW (1,924 hp)

        Available Cutting Power

        93.0 in

        93.0 mm

        2 × 600 kW (2 × 805 hp)

        Cutting Drum Diameter

        93.0 in

        93.0 mm

        1550 to 2007 mm (61 to 79 in)

        Cutting Drum Speed

        93.0 in

        93.0 mm

        40.2, 46.6 and 52.5 rpm

        Haulage Control

        93.0 in

        93.0 mm

        AC inverter drive

        Haulage Speed

        93.0 in

        93.0 mm

        Up to 29.5 m/min (Up to 97 ft/min)

        Haulage Pull

        93.0 in

        93.0 mm

        Up to 697 kN (Up to 70 tons)

        Pump Motor

        48 HP

        36 kW

        Body Height

        21.6 in

        550 mm

        Machine Weight - Approximate

        66 ton (US)

        60 t

        Operating Voltage

        4,160 V

        4,160 V

        Minimum Pan Width

        32.7 in

        832 mm

        Haulage Power

        93.0 in

        93.0 mm

        2 × 100 kW (2 × 134 hp)

      • RA560 (7)

        93.0 in

        93.0 mm

        Vibration monitoring (optional)

        RA560 (3)

        93.0 in

        93.0 mm

        Quillshaft transmission protection

        RA560 (4)

        93.0 in

        93.0 mm

        High-speed gears and idlers rated for 560 kW at 50 Hz (900 hp at 60 Hz), hub rated for 750 kW at 50 Hz (1,200 hp at 60 Hz).

        RA560 (1)

        93.0 in

        93.0 mm

        Reconfigurable gear cassettes for adaptation of drum speeds

        RA560 (5)

        93.0 in

        93.0 mm

        Separate oil compartments for high speed and planetary section (optimal cooling and lubrication)

        RA560 (2)

        93.0 in

        93.0 mm

        Integral monitoring transducers

        RA560 (6)

        93.0 in

        93.0 mm

        Robust cowl drive mechanism (optional)

      • Type (5)

        93.0 in

        93.0 mm

        Haulage unit accepts hydraulic motor for installation and face recovery

        Type (8)

        93.0 in

        93.0 mm

        Machine parking brake (optional)

        Type (9)

        93.0 in

        93.0 mm

        Vibration monitoring (optional)

        Type (3)

        93.0 in

        93.0 mm

        Fast oil drain functionality

        Type (2)

        93.0 in

        93.0 mm

        Absolute encoder for accurate machine position detection (no reset devices at gate ends needed)

        Type (1)

        93.0 in

        93.0 mm

        Transmission reduction of 132.6:1

        Type (7)

        93.0 in

        93.0 mm

        Quill shaft transmission protection

        Type (6)

        93.0 in

        93.0 mm

        Oil temperature monitoring

        Type (4)

        93.0 in

        93.0 mm

        Closed loop control for accurate load-sharing and increased service life of rackbar and sprocket

      • Type (5)

        93.0 in

        93.0 mm

        Suitable for all rack type systems

        Type (1)

        93.0 in

        93.0 mm

        Configurations for direct and indirect drives

        Type (3)

        93.0 in

        93.0 mm

        Removable modular top drive wheel assembly (top cover allows easy and quick inspections)

        Type (4)

        93.0 in

        93.0 mm

        Trapping shoe with replaceable wear inserts (for indirect drives)

        Type (6)

        93.0 in

        93.0 mm

        Reconfigurable downdrive and shoe posts for different pan widths or seam heights

        Type (2)

        93.0 in

        93.0 mm

        Fully removable, modular gearbox

      • Type (8)

        93.0 in

        93.0 mm

        Optional boost valve for accelerated gate end operations (recommended for cowls)

        Type (4)

        93.0 in

        93.0 mm

        Integral monitoring transducers (oil level and temperature)

        Type (2)

        93.0 in

        93.0 mm

        Fixed displacement pump with two options

        Type (7)

        93.0 in

        93.0 mm

        Reliable low-voltage pump motor rating of 30 kW @ 50 Hz (48 hp @ 60 Hz)

        Type (1)

        93.0 in

        93.0 mm

        Single powerpack with less parts to fail and less tasks for quick and easy maintenance

        Type (3)

        93.0 in

        93.0 mm

        Robust hydraulic reservoir of 140 L (37 gal) capacity

        Type (5)

        93.0 in

        93.0 mm

        For use with ISO 68 hydraulic oils

        Type (6)

        93.0 in

        93.0 mm

        Available with 6 section valve bank

      • Type (6)

        93.0 in

        93.0 mm

        Mainframe adds additional weight to cope with the most challenging cutting conditions

        Type (1)

        93.0 in

        93.0 mm

        High structural integrity and absorption of all cutting and haulage forces, providing maximum protection for all major units

        Type (5)

        93.0 in

        93.0 mm

        Spray boom retrofittable

        Type (3)

        93.0 in

        93.0 mm

        Split mainframe available in case of transportation limitations

        Type (4)

        93.0 in

        93.0 mm

        Modular design enabling for selective overhauls

        Type (2)

        93.0 in

        93.0 mm

        Maximum protection of electrical boxes, providing the highest level of flameproof integrity, protects gearboxes against torsion

      • Type (4)

        93.0 in

        93.0 mm

        LV circuit breakers resettable through FLP cover (reduced downtime)

        Type (2)

        93.0 in

        93.0 mm

        High current carrying capacity of 400 amps; accommodation of trailing cables up to 120 mm² (4/0 AWG)

        Type (3)

        93.0 in

        93.0 mm

        Internal chassis can be ‘bench built,’ tested and stored

        Type (6)

        93.0 in

        93.0 mm

        Containing cutter motor contactors, circuit breakers, control transformer, current monitoring, HV fuses, earth leakage and visible disconnect

        Type (5)

        93.0 in

        93.0 mm

        Powerful PMC Evo-S control system with state-of-the-art Ethernet communication

        Type (1)

        93.0 in

        93.0 mm

        Flameproof module containing the majority of the electrical control and power distribution components

      • Coal Sizer

        • 100 kW (134 hp)

        • 200 kW (268 hp)

      • Gate End Data Connection

      WHY CHOOSE EMPIRE

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance