THIS IS MY SELECT
Compact Wheel Loaders
910 Compact Wheel Loader
Maximum Gross Power
110 HP
Operating Weight
18,102 lb
Bucket Capacities
93.0 hp
1.3-1.9 m3 (1.7-2.5 yd3)
THIS IS MY SELECT
backhoe loader
910 Compact Wheel Loader
Maximum Gross Power
110 HP
Operating Weight
18,102 lb
Bucket Capacities
93.0 hp
1.3-1.9 m3 (1.7-2.5 yd3)
Specifications
The Cat® 910 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.
-
Maximum Gross Power
110 HP
82 kW
Rated Net Power - Rated Engine Speed
2,200 r/min
2,200 r/min
Maximum Gross Power - Rated Engine Speed
1,800 r/min
1,800 r/min
Rated Net Power - SAE J1349
99 HP
74 kW
Maximum Gross Power - ISO 14396 (metric)
112 HP
112 HP
Rated Net Power - ISO 9249
98 HP
73 kW
Maximum Gross Torque - SAE J1995
335 ft·lbf
454 N·m
Maximum Gross Torque - ISO 14396
332 ft·lbf
450 N·m
Maximum Net Torque - SAE J1349
329 ft·lbf
446 N·m
Maximum Net Torque - ISO 9249
327 ft·lbf
443 N·m
Displacement
220 in³
3.6 l
Bore
3.85 in
98 mm
Stroke
4.72 in
120 mm
Engine Model
93.0 in
93.0 mm
Cat C3.6
Emissions
93.0 in
93.0 mm
Engine meets Tier 4 Final/Stage V emission standards.
Note
93.0 in
93.0 mm
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396
110 HP
82 kW
-
Front
93.0 in
93.0 mm
Fixed; Locking differential (standard)
Rear
93.0 in
93.0 mm
Oscillating ±11 degrees; Locking differential (Standard)
-
Bucket Capacities
93.0 in
93.0 mm
1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities - General Purpose
93.0 in
93.0 mm
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
93.0 in
93.0 mm
2.5-3.5 m³ (3.3-4.6 yd³)
-
Maximum Working Pressure - Steering Pump
2,683 psi
18,500 kPa
Steering Articulation Angle - Each Direction
40 °
40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2 s
3.2 s
Maximum Flow - Steering Pump
17 gal/min
66 l/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
3.75 turns
-
Operating Weight
18,102 lb
8,109 kg
-
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
1.4 s
Hydraulic Cycle Time - Total Cycle Time
12.5 s
12.5 s
Maximum Working Pressure - Implement Pump
3,408 psi
23,500 kPa
Relief Pressure - Tilt Cylinder
4,931 psi
34,000 kPa
Hydraulic Cycle Time - Rackback
2.2 s
2.2 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3,046 psi
21,000 kPa
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
5.2 s
Maximum Flow - Implement Pump
32 gal/min
122 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3,046 psi
21,000 kPa
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
90 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24 gal/min
90 l/min
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
3.7 s
-
Cooling System
5.7 gal (US)
21.5 l
Fuel Tank
43.6 gal (US)
165 l
Hydraulic System - Including Tank
25.9 gal (US)
98 l
Hydraulic Tank
14.5 gal (US)
55 l
Transmission
0.8 gal (US)
3.2 l
Note
93.0 in
93.0 mm
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Front Center Differential
2 gal (US)
7.5 l
Axles - Rear Center Differential
2 gal (US)
7.5 l
Engine Crankcase
2.6 gal (US)
10 l
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
18 l
-
Note
93.0 in
93.0 mm
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3
25 mile/h
40 km/h
Forward and Reverse - Speed Range 2*
12.5 mile/h
20 km/h
Forward and Reverse - Speed Range 1*
6.3 mile/h
10 km/h
-
Note (2)
93.0 in
93.0 mm
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size
93.0 in
93.0 mm
15.5 R25 L2 XTLA
Other Choices Include
93.0 in
93.0 mm
17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Note (3)
93.0 in
93.0 mm
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
93.0 in
93.0 mm
Other tire choices are available. Contact your Cat dealer for details.
-
ROPS
93.0 in
93.0 mm
ISO 3471:2008
FOPS
93.0 in
93.0 mm
EN ISO 3449:2008 (ISO 3449:2005)
Note (2)
93.0 in
93.0 mm
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
93.0 in
93.0 mm
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)
93.0 in
93.0 mm
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
93.0 in
93.0 mm
*The measurements were conducted with the cab doors and windows closed.
Similar Models
WHY CHOOSE EMPIRE
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance