Maximum Gross Power

110 HP

82 kW

Rated Net Power - Rated Engine Speed

2,200 r/min

2,200 r/min

Maximum Gross Power - Rated Engine Speed

1,800 r/min

1,800 r/min

Rated Net Power - SAE J1349

99 HP

74 kW

Maximum Gross Power - ISO 14396 (metric)

112 HP

112 HP

Rated Net Power - ISO 9249

98 HP

73 kW

Maximum Gross Torque - SAE J1995

335 ft·lbf

454 N·m

Maximum Gross Torque - ISO 14396

332 ft·lbf

450 N·m

Maximum Net Torque - SAE J1349

329 ft·lbf

446 N·m

Maximum Net Torque - ISO 9249

327 ft·lbf

443 N·m

Displacement

220 in³

3.6 l

Bore

3.85 in

98 mm

Stroke

4.72 in

120 mm

Engine Model

93.0 in

93.0 mm

Cat C3.6

Emissions

93.0 in

93.0 mm

Engine meets Tier 4 Final/Stage V emission standards.

Note

93.0 in

93.0 mm

Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Maximum Gross Power - ISO 14396

110 HP

82 kW

Rear

93.0 in

93.0 mm

Oscillating ±11 degrees; Locking differential (Standard)

Front

93.0 in

93.0 mm

Fixed; Locking differential (standard)

Bucket Capacities

93.0 in

93.0 mm

1.3-1.9 m3 (1.7-2.5 yd3)

Bucket Capacities - General Purpose

93.0 in

93.0 mm

1.3-1.9 m³ (1.7-2.5 yd³)

Bucket Capacities - Light Material

93.0 in

93.0 mm

2.5-3.5 m³ (3.3-4.6 yd³)

Maximum Flow - Steering Pump

22 gal/min

82 l/min

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.75 turns

3.75 turns

Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed

2.8 s

2.8 s

Maximum Working Pressure - Steering Pump

3,263 psi

22,500 kPa

Steering Articulation Angle - Each Direction

40 °

40 °

Operating Weight

19,103 lb

8,668 kg

Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure

3,046 psi

21,000 kPa

Maximum Flow - Implement Pump

39 gal/min

148 l/min

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard

24 gal/min

90 l/min

Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure

3,046 psi

21,000 kPa

Hydraulic Cycle Time - Total Cycle Time

12.5 s

12.5 s

Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift

5.2 s

5.2 s

Maximum Flow - Implement Pump - 4th Function, Maximum Flow

24 gal/min

90 l/min

Hydraulic Cycle Time - Dump, at Maximum Reach

1.4 s

1.4 s

Relief Pressure - Tilt Cylinder

4,931 psi

34,000 kPa

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High

32 gal/min

120 l/min

Maximum Working Pressure - Implement Pump

4,061 psi

28,000 kPa

Hydraulic Cycle Time - Rackback

2.2 s

2.2 s

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level

3.7 s

3.7 s

Cooling System

5.7 gal (US)

21.5 l

Fuel Tank

43.6 gal (US)

165 l

Note

93.0 in

93.0 mm

DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Axles - Rear Center Differential

2 gal (US)

7.5 l

Hydraulic System - Including Tank

25.9 gal (US)

98 l

Diesel Exhaust Fluid (DEF) Tank

4.8 gal (US)

18 l

Engine Crankcase

2.6 gal (US)

10 l

Hydraulic Tank

14.5 gal (US)

55 l

Transmission

0.8 gal (US)

3.2 l

Axles - Front Center Differential

2 gal (US)

7.5 l

Note

93.0 in

93.0 mm

*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Forward and Reverse - Speed Range 3

25 mile/h

40 km/h

Forward and Reverse - Speed Range 1*

6.3 mile/h

10 km/h

Forward and Reverse - Speed Range 2*

12.5 mile/h

20 km/h

Other Choices Include

93.0 in

93.0 mm

17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid

Note (1)

93.0 in

93.0 mm

Other tire choices are available. Contact your Cat dealer for details.

Standard Size

93.0 in

93.0 mm

17.5 R25 L2 XTLA

Note (3)

93.0 in

93.0 mm

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (2)

93.0 in

93.0 mm

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

ROPS

93.0 in

93.0 mm

ISO 3471:2008

FOPS

93.0 in

93.0 mm

EN ISO 3449:2008 (ISO 3449:2005)

Note (4)

93.0 in

93.0 mm

*The measurements were conducted with the cab doors and windows closed.

Note (2)

93.0 in

93.0 mm

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).

Note (3)

93.0 in

93.0 mm

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Note (1)

93.0 in

93.0 mm

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.