THIS IS MY SELECT

Large Wheel Loaders

986K Large Wheel Loader - Block Handler

Net Power

373 HP

Operating Weight

116,688 lb

Bucket Capacities

93.0 hp

5.4 m³ (7 yd³)

THIS IS MY SELECT

backhoe loader

986K Large Wheel Loader - Block Handler

Net Power

373 HP

Operating Weight

116,688 lb

Bucket Capacities

93.0 hp

5.4 m³ (7 yd³)

Specifications

Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton.
The new 986K continues the legacy of durability, performance, safety, operator comfort, serviceability and sustainability.

      • Lift/Tilt System - Circuit

        93.0 in

        93.0 mm

        Load Sense

        Lift/Tilt System - Pump

        93.0 in

        93.0 mm

        2 × 110 cc variable displacement

        Maximum Flow at 2,165 rpm

        123 gal/min

        470 l/min

        Relief Valve Setting - Lift/Tilt

        4,050 psi

        27,900 kPa

        Lift Cylinder - Bore

        7.5 in

        190 mm

        Lift Cylinder - Stroke

        45 in

        1,138 mm

        Tilt Cylinder - Bore

        6.7 in

        170 mm

        Tilt Cylinder - Stroke

        22.4 in

        568 mm

      • Air Conditioning

        93.0 in

        93.0 mm

        The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

      • Brakes

        93.0 in

        93.0 mm

        ISO 3450: 2011

      • Bucket Capacities

        93.0 in

        93.0 mm

        5.4 m³ (7 yd³)

      • Ground to Top of ROPS

        13.5 ft

        4,100 mm

        Ground to Top of Exhaust Stacks

        13.3 ft

        4,060 mm

        Ground to Top of Hood

        10.7 ft

        3,270 mm

        Ground to Center of Rear Axle

        3.2 ft

        978 mm

        Ground to Fuel Tank Clearance

        2.3 ft

        691 mm

        Ground to Lower Hitch Clearance

        1.5 ft

        459 mm

        Reach at Maximum Lift

        8 ft

        2,437 mm

        Clearance at Maximum Lift

        10.7 ft

        3,259 mm

        B-Pin Height at Maximum Lift

        15 ft

        4,566 mm

        Maximum Overall Height, Bucket Raised

        20.9 ft

        6,359 mm

        Rear Axle Center Line to Bumper

        10.3 ft

        3,132 mm

        Wheel Base

        12.5 ft

        3,810 mm

        Maximum Overall Length

        35 ft

        10,671 mm

        Front Axle Centerline to Bucket Tip

        12.2 ft

        3,729 mm

      • Ground to Top of ROPS

        13.5 ft

        4,100 mm

        Ground to Top of Exhaust Stacks

        13.3 ft

        4,060 mm

        Ground to Top of Hood

        10.7 ft

        3,270 mm

        Ground to Center of Rear Axle

        3.2 ft

        978 mm

        Ground to Fuel Tank Clearance

        2.3 ft

        691 mm

        Ground to Lower Hitch Clearance

        1.5 ft

        459 mm

        B-Pin Height at Maximum Lift

        15 ft

        4,566 mm

        Rear Axle Center Line to Bumper

        10.3 ft

        3,132 mm

        Wheel Base

        12.5 ft

        3,810 mm

        Maximum Overall Length

        35.4 ft

        10,776 mm

        Front Axle Centerline to Bucket Tip

        12.6 ft

        3,834 mm

      • Net Power

        373 HP

        278 kW

        Engine Model

        93.0 in

        93.0 mm

        Cat® C15 ™

        Emissions

        93.0 in

        93.0 mm

        U.S. EPA Tier 4 Final/EU Stage V, or China Nonroad Stage III and Brazil MAR-1 and equivalent to U.S. Tier 3 and EU Stage IIIA

        Gross Power - ISO 14396

        449 HP

        335 kW

        Peak Power Speed - 1,600 rpm - SAE J1995

        456 HP

        340 kW

        Peak Power Speed - 1,600 rpm - SAE J1995 (DIN)

        462 HP

        340 kW

        Peak Power Speed - 1,600 rpm - ISO 14396

        449 HP

        335 kW

        Peak Power Speed - 1,600 rpm - ISO 14396 (DIN)

        455 HP

        335 kW

        Rated Speed - 2,000 rpm - EEC 80/1269

        373 HP

        278 kW

        Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)

        378 HP

        278 kW

        Rated Speed - 2,000 rpm - ISO 9249

        373 HP

        278 kW

        Rated Speed - 2,000 rpm - ISO 9249 (DIN)

        378 HP

        278 kW

        Rated Speed - 2,000 rpm - SAE J1349

        373 HP

        278 kW

        Rated Speed - 2,000 rpm - SAE J1349 (DIN)

        378 HP

        278 kW

        Bore

        5.4 in

        137 mm

        Stroke

        6.75 in

        171.5 mm

        Displacement

        927 in³

        15.2 l

        Peak Torque - 1,200 rpm - SAE J1995

        1,778 lb/ft

        2,411 N·m

        Torque Rise

        93.0 in

        93.0 mm

        16%

      • Rack Back

        4.5 s

        4.5 s

        Raise

        8.5 s

        8.5 s

        Dump

        3 s

        3 s

        Lower

        4.9 s

        4.9 s

        Lower Float Down

        4.3 s

        4.3 s

        Total Hydraulic Cycle Time

        15.8 s

        15.8 s

      • Front

        93.0 in

        93.0 mm

        Fixed

        Rear

        93.0 in

        93.0 mm

        Trunnion

        Oscillation Angle

        93.0 in

        93.0 mm

        ±12.5°

        Oscillation Angle - Chain Arrangement

        93.0 in

        93.0 mm

        ±8.5°

      • ISO 5010:2007 - Steering System - Circuit

        93.0 in

        93.0 mm

        Load Sense

        ISO 5010:2007 - Steering System - Pump

        93.0 in

        93.0 mm

        Piston, variable displacement

        ISO 5010:2007 - Maximum Flow at 1,400 rpm

        52 gal/min

        200 l/min

        ISO 5010:2007 - Steering Cutoff Pressure

        4,000 psi

        27,600 kPa

        ISO 5010:2007 - Total Steering Angle

        93.0 in

        93.0 mm

        70°

      • Operating Weight

        116,688 lb

        52,929 kg

      • ROPS/FOPS

        93.0 in

        93.0 mm

        ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

      • Fuel Tank

        116 gal (US)

        438 l

        Cooling Systems

        26 gal (US)

        100 l

        Crankcase

        9 gal (US)

        34 l

        Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only)

        6 gal (US)

        23 l

        Transmission

        20 gal (US)

        75 l

        Axle Oil - Differentials and Final Drives - Front

        49 gal (US)

        186 l

        Axle Oil - Differentials and Final Drives - Rear

        45 gal (US)

        170 l

        Hydraulic System Factory Fill

        87 gal (US)

        330 l

        Hydraulic System - Tank Only

        34 gal (US)

        130 l

      • Operator Sound Level (ISO 6396)

        72 dB(A)

        72 dB(A)

        Machine Sound Level (ISO 6395)

        112 dB(A)

        112 dB(A)

        Note

        93.0 in

        93.0 mm

        The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

      • Operator Sound Level (ISO 6396)

        72 dB(A)

        72 dB(A)

        Machine Sound Level (ISO 6395)

        110 dB(A)

        110 dB(A)

        Note

        93.0 in

        93.0 mm

        The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

      • Transmission Type

        93.0 in

        93.0 mm

        Cat-Planeten-Lastschaltgetriebe

        Forward - 1

        5 mile/h

        7.3 km/h

        Forward - 2

        8 mile/h

        12.2 km/h

        Direct Drive - Forward 2

        8 mile/h

        12.7 km/h

        Direct Drive - Forward 3

        14 mile/h

        22 km/h

        Direct Drive - Forward 4

        24 mile/h

        39 km/h

        Reverse - 1

        5 mile/h

        7.6 km/h

        Reverse - 2

        8 mile/h

        13.6 km/h

        Direct Drive - Reverse 2

        9 mile/h

        14.1 km/h

        Direct Drive - Reverse 3

        16 mile/h

        25 km/h

        Direct Drive - Reverse 4

        25.4 mile/h

        40.8 km/h

      • NOTE

      • ELECTRICAL

        • Alarm, back-up

        • Alternator, single 145 amp

        • Batteries, dry

        • Converter, 10/15 amp, 24V to 12V

        • Lighting system (halogen, work lights, access and service platform lighting)

        • Starting and charging system, 24V

        • Starter emergency start receptacle

      • OPERATOR ENVIRONMENT

        • Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings

        • Air conditioner

        • Rear vision camera system

        • Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port

        • Controls, lift and tilt function

        • Heater, defroster

        • Horn, electric

        • Instrumentation, gauges: – Coolant temperature – Fuel level – DEF level – Hydraulic oil temperature – Power train oil temperature

        • Light, cab, dome

        • Lunchbox, beverage holders

        • Mirrors, rearview (externally mounted)

        • Seat, Cat Comfort (cloth), air suspension, six-way adjustable

        • Seat belt minder

        • Seat belt, retractable, 76 mm (3 in) wide

        • STIC Control System

        • UV glass

        • Transmission gear indicator

        • Wet-Arm wipers/washers (front and rear): – Intermittent front and rear wipers

        • Lights, directional

      • POWER TRAIN

        • Cat Production Measurement ready

        • Brakes, oil-cooled, multi-disc, service/secondary

        • Case drain screens

        • Crankcase guard

        • Electro hydraulic parking brake

        • Engine, C15 MEUI diesel, turbocharged/aftercooled

        • Ground level engine shutoff

        • Turbine precleaner, engine air intake

        • Starting aid, ether, automatic

        • Torque converter, Neutralizer

        • Transmission, planetary powershift, 4F/3R electronic control

        • Manual switch and automatic fuel priming

      • OTHER

        • Automatic bucket lift kickout/positioner

        • Hydraulically driven demand fan

        • Couplings, Cat O-ring face seals

        • Doors, service access (locking)

        • Ecology drains for engine, radiator, hydraulic tank

        • Fuel tank, 535 L (141 gal)

        • Hitch, drawbar with pin

        • Hoses, Cat XT™

        • Hydraulic, steering and brake filtration/screening system

        • Cat Clean Emission Module

        • Oil sampling valves

        • Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)

        • Rear access to cab and service platform

        • Steering, load sensing

        • Toe kicks

        • Vandalism protection caplocks

      • NOTE

      • POWER TRAIN

        • –50° C (–58° F) antifreeze

        • Engine oil change system, high speed, Wiggins

        • Engine block heater 120V or 240V

        • High ambient cooling – software

        • Cat Production Measurement

      • MISCELLANEOUS ATTACHMENTS

        • Front and rear roading fenders

        • Fast fill fuel system (Shaw-Aero)

        • Cold Weather Starting (extra two batteries)

        • Aggregate Handler

        • Wheel chocks

      • OPERATOR ENVIRONMENT

        • Cab powered precleaner

        • Cat Detect Vision

        • AM/FM/CD/MP3 radio

        • Satellite Sirius radio with Bluetooth

        • LED warning strobe

        • CB radio ready

        • Window pull down visor

        • Handrail mounted mirrors

      WHY CHOOSE EMPIRE

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance