THIS IS MY SELECT

Small Wheel Loaders

926M Small Wheel Loader

Maximum Gross Power

168 HP

Operating Weight

28,193 lb

Bucket Capacities

93.0 hp

1.9-5.0 m3 (2.5-6.5 yd3)

THIS IS MY SELECT

backhoe loader

926M Small Wheel Loader

Maximum Gross Power

168 HP

Operating Weight

28,193 lb

Bucket Capacities

93.0 hp

1.9-5.0 m3 (2.5-6.5 yd3)

Specifications

The Cat 926M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage V emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

      • Maximum Gross Power

        168 HP

        125 kW

        Displacement (Performance Power Mode: Speed Range 1-4)

        427 in³

        7.01 l

        Engine Model

        93.0 in

        93.0 mm

        Cat C7.1**

        Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)

        158 mhp

        158 mhp

        Note (1)

        93.0 in

        93.0 mm

        Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

        Note (2)

        93.0 in

        93.0 mm

        No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

        Note (3)

        93.0 in

        93.0 mm

        *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

        Note (4)

        93.0 in

        93.0 mm

        **The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards.

        Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)

        164 HP

        122 kW

        Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)

        587 ft·lbf

        796 N·m

        Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)

        572 ft·lbf

        776 N·m

        Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)

        156 HP

        116 kW

        Displacement (Standard Power Mode: Speed Range 1-3*)

        427 in³

        7.01 l

        Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)

        168 HP

        125 kW

        Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)

        156 HP

        116 kW

        Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)

        573 ft·lbf

        777 N·m

        Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)

        163 HP

        122 kW

        Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)

        586 ft·lbf

        795 N·m

        Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)

        166 mhp

        166 mhp

        Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)

        162 mhp

        162 mhp

        Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)

        170 mhp

        170 mhp

        Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)

        160 HP

        119 kW

        Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)

        601 ft·lbf

        815 N·m

        Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)

        588 ft·lbf

        797 N·m

      • Bucket Capacities

        93.0 in

        93.0 mm

        1.9-5.0 m3 (2.5-6.5 yd3)

        Bucket Capacities - General Purpose

        93.0 in

        93.0 mm

        1.9-2.5 m³ (2.5-3.2 yd³)

        Bucket Capacities - Light Material

        93.0 in

        93.0 mm

        3.1-5.0 m³ (4.0-6.5 yd³)

      • Operating Weight

        28,193 lb

        12,789 kg

      • ROPS

        93.0 in

        93.0 mm

        ISO 3471:2008

        FOPS

        93.0 in

        93.0 mm

        ISO 3449:2005 Level II

        Note (3)

        93.0 in

        93.0 mm

        *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

        Note (2)

        93.0 in

        93.0 mm

        The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)

        Note (1)

        93.0 in

        93.0 mm

        Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

      • Air Conditioning

        93.0 in

        93.0 mm

        The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

      • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height

        1.7 s

        1.7 s

        Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time

        9.5 s

        9.5 s

        Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level

        2.6 s

        2.6 s

        Maximum Flow - Implement Pump - 4th Function Maximum Flow*

        40 gal/min

        150 l/min

        Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift

        5.5 s

        5.5 s

        Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure

        3,771 psi

        26,000 kPa

        Maximum Flow - Implement Pump

        40 gal/min

        150 l/min

        Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height

        1.5 s

        1.5 s

        Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time

        10.5 s

        10.5 s

        Maximum Flow - Implement Pump - 3rd Function Maximum Flow*

        40 gal/min

        150 l/min

        Relief Pressure - Tilt Cylinder

        4,061 psi

        28,000 kPa

        Maximum Working Pressure - Implement Pump

        3,771 psi

        26,000 kPa

        Note (1)

        93.0 in

        93.0 mm

        *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.

        Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level

        2.6 s

        2.6 s

        Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift

        6.2 s

        6.2 s

        Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure

        4,061 psi

        28,000 kPa

      • Rear

        93.0 in

        93.0 mm

        Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

        Front

        93.0 in

        93.0 mm

        Fixed; Locking differential (standard)

      • Average Exterior Sound Pressure (ISO 6395:2008)

        101 dB(A)

        101 dB(A)

        Operator Sound Pressure (ISO 6396:2008)

        72 dB(A)

        72 dB(A)

        Note (1)

        93.0 in

        93.0 mm

        European Union Directive “2000/14/EC.”

      • Maximum Working Pressure - Steering Pump

        3,500 psi

        24,130 kPa

        Maximum Steering Torque - 40° (Full Turn)

        27,747 ft·lbf

        37,620 N·m

        Maximum Steering Torque - 0° (Straight Machine)

        37,155 ft·lbf

        50,375 N·m

        Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

        3.5 turns

        3.5 turns

        Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed

        2.4 s

        2.4 s

        Maximum Flow - Steering Pump

        34 gal/min

        130 l/min

        Steering Articulation Angle - Each Direction

        93.0 in

        93.0 mm

        40°

      • Note (2)

        93.0 in

        93.0 mm

        In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

        Note (3)

        93.0 in

        93.0 mm

        Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

        Note (1)

        93.0 in

        93.0 mm

        Other tire choices are available. Contact your Cat dealer for details.

        Standard Size

        93.0 in

        93.0 mm

        20.5 R25, radial (L-3)

        Other Choices Include

        93.0 in

        93.0 mm

        20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 17.5 R25, radial (L-2); 17.5 R25, radial (L-3); 17.5 R25, radial (L-5); 550/65 R25 radial (L-3); Skidder/Agriculture

      • Forward and Reverse - Range 1*

        93.0 in

        93.0 mm

        1-13 km/h (0.6-8 mph)

        Forward and Reverse - Range 2

        8 mile/h

        13 km/h

        Forward and Reverse - Range 4

        25 mile/h

        40 km/h

        Note

        93.0 in

        93.0 mm

        *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).

        Forward and Reverse - Range 3

        17 mile/h

        27 km/h

      • Rear Axles

        6.6 gal (US)

        25 l

        Engine Crankcase

        5.3 gal (US)

        20 l

        Transmission - Gear Box

        2.2 gal (US)

        8.5 l

        Front Axles

        6.9 gal (US)

        26 l

        Diesel Exhaust Fluid (DEF) Tank

        5 gal (US)

        19 l

        Fuel Tank

        51.5 gal (US)

        195 l

        Note

        93.0 in

        93.0 mm

        DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

        Hydraulic Tank

        23.8 gal (US)

        90 l

        Hydraulic System - Including Tank

        42.3 gal (US)

        160 l

        Cooling System

        7.9 gal (US)

        30 l

      • POWER TRAIN

        • Axle Duo-Cone™ seal guards

        • Auto idle shut down feature

        • Cat C7.1 engine – Power modes (Standard and Performance) – Power by range (High Power in Range 4) – Turbocharged and aftercooled – Diesel particulate filter (Fit for Life)

        • Coded start (requires secondary display)

        • Differential lock in front axle

        • Enclosed wet disc full hydraulic brakes

        • Hydraulically driven demand cooling fan

        • Hydrostatic transmission with electronic control – Operator modes (Default, TC, Hystat, and Ice) – Directional Shift Aggressiveness (fast, medium, slow) – Rimpull control, adjust wheel torque – Creeper control, adjust ground speed

        • Parking brake, electric

        • Single plane cooling package wide six fins per inch density

        • Oil sampling ports

        • Throttle lock and max speed limiter

      • HYDRAULICS

        • Automatic lift lower and tilt kickouts, adjustable in-cab

        • Bucket and fork modes, adjustable in-cab

        • Cylinder damping at kickout and mechanical end stops

        • Fine mode control (fast, medium, slow)

        • Hydraulic response setting (fast, medium, slow)

        • Load sensing hydraulics and steering

        • Seat-mounted hydraulic joystick controls

      • ELECTRICAL

        • Alternator, 115 amp, heavy duty

        • Batteries, 1,000 CCA (2) 24V system, disconnect switch

        • Back-up alarm

        • Emergency shutdown switch

        • Halogen work and roading lights, LED rear tail lights

        • Product Link™ PRO with three year subscription

        • Remote jump start post

        • Resettable main and critical function breakers

      • OPERATOR ENVIRONMENT

        • 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator

        • Automatic temperature control

        • Cab, pressurized

        • Camera, rearview, with dedicated display

        • External heated mirrors with lower parabolic

        • Ground level cab door release

        • Hydraulic control lockout

        • Mirror, single

        • Lunch box storage

        • Radio ready speakers

        • Rear window defrost, electric

        • Column mounted multi function control – lights, wipers, turn signal

        • Tilt and telescopic steering wheel

        • Tinted front glass

        • Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal

        • Suspension seat, fabric

      • OTHER STANDARD EQUIPMENT

        • Large-access enclosure doors with adjustable close/open force

        • Cat optimized Z-bar linkage with parallel lift

        • Recovery hitch, with pin

        • Remote mounted lubrication points

        • Lockable compartments and enclosures

      WHY CHOOSE EMPIRE

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance