THIS IS MY SELECT

ATS MX Contactor

CTS Series Automatic Transfer Switch

Rating Range

93.0 hp

40 to 4000A

Transfer Type

93.0 hp

Open transition

Switch Type

93.0 hp

Contactor Based

THIS IS MY SELECT

backhoe loader

CTS Series Automatic Transfer Switch

Rating Range

93.0 hp

40 to 4000A

Transfer Type

93.0 hp

Open transition

Switch Type

93.0 hp

Contactor Based

Specifications

The Cat® CTS Series Automatic Transfer Switch(ATS)is configurable for applications requiring the dependability and ease of operation found in a full featured power contactor type transfer switch. The CTS Series is equipped with the MX250 controller that is designed for the most demanding transfer or bypass switch applications.

      • Rating Range

        93.0 in

        93.0 mm

        40 to 4000A

        Transfer Type

        93.0 in

        93.0 mm

        Open transition

        Switch Type

        93.0 in

        93.0 mm

        Contactor Based

      • Control Power

        93.0 in

        93.0 mm

        40 to 4000 amperes, 2, 3 or 4 Poles

        Enclosure Capability

        93.0 in

        93.0 mm

        NEMA 1, 3R, 4, 4X and 12

        System Voltage Application

        93.0 in

        93.0 mm

        Available to 600 VAC, 50 or 60 Hz

        Applicable Testing

        93.0 in

        93.0 mm

        UL 1008 listed at 480 VAC CSA C22.2 No. 178 certified at 600 VAC IEC 947-6-1 listed through 480 VAC

      • The Cat CTS Series of Automatic Transfer Switches

      • 40-4000 Amps:

        • CTSD Delayed Transition Transfer Switches

        • CTSM Manual Transfer Switches

        • CTS Automatic Transfer Switches

      • 100-4000 Amps:

        • CTSCT Closed Transition Transfer Switches

        • CBTSD Delayed Transition Bypass Switches

        • CBTSCT Closed Transition Bypass Switches

        • CBTS Automatic Transfer/Bypass Switches

      • All CTS products meet or exceed industry requirements to allow specification and installation with confidence.

        • Codes and Standards: NFPA 0,99, 101,110,NEC 517,700,701,702,IEEE 446, 241,NEMA ICS2-447

        • CSA C22.2 No. 178 listed through 600 VAC

        • Quality System: ISO 9001 Registered

        • UL 1008 listed through 480 VAC

        • Controls tested in accordance with:

        • Equipment (Controls and Power Section)Seismic Test Qualified to: IBC-2003 IEEE-693-2005

        • Enclosures meet the requirements of: UL 508, UL 50, ICS 6, ANSI C33.76 and NEMA 250

        • IEC 947-6-1 listed through 480 VAC

        • This ruggedly built family of power contactor switches has been specifically designed for transfer switch duty with dependability, versatility and user friendliness of prime concern. The CTS power panel components, consisting of power switching contacts, drive mechanism and terminal lugs, are mounted on a specially formed backplane. Logic devices including microprocessor control auxiliary time delays and special accessory equipment are assembled on the door for ease of maintenance and separation from the power section. They are connected with a numbered wiring harness equipped with a disconnect plug that allows isolation of the control panel for maintenance.

      • CTS Series Method of Operation

      • Drive Mechanism

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN