THIS IS MY SELECT

Diesel Generator Sets

C175-20

Standby Rating

93.0 hp

4000(no fan)/3900 kVA

Prime Power Rating

93.0 hp

3600(no fan)/3500 kVA

Emissions/Fuel Strategy

93.0 hp

Low Fuel, Low Emissions

THIS IS MY SELECT

backhoe loader

C175-20

Standby Rating

93.0 hp

4000(no fan)/3900 kVA

Prime Power Rating

93.0 hp

3600(no fan)/3500 kVA

Emissions/Fuel Strategy

93.0 hp

Low Fuel, Low Emissions

Specifications

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

      • Standby Rating

        93.0 in

        93.0 mm

        4000(no fan)/3900 kVA

        Prime Power Rating

        93.0 in

        93.0 mm

        3600(no fan)/3500 kVA

        Emissions/Fuel Strategy

        93.0 in

        93.0 mm

        Low Fuel, Low Emissions

        Voltage

        93.0 in

        93.0 mm

        3300 to 11000 Volts

        Frequency

        93.0 in

        93.0 mm

        50 Hz

        Speed

        93.0 in

        93.0 mm

        1500 RPM

        Duty Cycle

        93.0 in

        93.0 mm

        Standby, Mission Critical, Prime, Continuous

        Maximum Rating

        93.0 in

        93.0 mm

        4000 kVA

        Minimum Rating

        93.0 in

        93.0 mm

        3150 kVA

      • Engine Model

        93.0 in

        93.0 mm

        C175-20 SCAC, V-20, 4-Stroke Water-Cooled Diesel

        Bore

        6.89 in

        175 mm

        Stroke

        8.66 in

        220 mm

        Displacement

        6,456.31 in³

        105.8 l

        Compression Ratio

        93.0 in

        93.0 mm

        15.3:1

        Aspiration

        93.0 in

        93.0 mm

        Turbo Aftercooled

        Fuel System

        93.0 in

        93.0 mm

        Common Rail

        Governor Type

        93.0 in

        93.0 mm

        ADEM� A4

      • Length - Minimum

        261.5 in

        6,642.8 mm

        Length - Maximum

        330.6 in

        8,397 mm

        Width - Minimum

        85.4 in

        2,170.2 mm

        Width - Maximum

        330.6 in

        8,397 mm

        Height - Minimum

        87.6 in

        2,224.3 mm

        Height - Maximum

        150.7 in

        3,827 mm

        Dry Weight - Genset (minimum)

        55,100 lb

        25,000 kg

        Dry Weight - Genset (maximum)

        66,200 lb

        30,000 kg

      • Air Inlet

      • Control Panel

        • Engine cycle crank

        • Oil pressure (psi, kPa or bar)

        • Digital Indicators

        • Coolant temperature

        • Environmental sealed front face

        • Frequency (Hz)

        • True RMS AC metering, 3-phase, +/-2% accuracy

        • Text alarm / event descriptions

        • Low coolant level

        • Volts (L-L & L-N)

        • Auto / start / stop control

        • Warning / shutdown indicators

        • Emergency stop pushbutton

        • Engine cool-down timer

        • DC volts

        • High coolant temperature

        • Operating hours

        • Low oil pressure

        • EMCP 4.2B

        • Amps (per phase & average)

        • 4 Programmable relay Inputs

        • Alarm acknowledge

        • 4 Programmable relay output

        • Failure to start (overcrank)

        • Overspeed

        • Lamp test

        • 24 Volt DC operation

        • Wall mounted controls

        • RPM

      • Cooling System

        • SCAC cooling

        • Coolant sensors

        • JW Inlet: 6' ANSI / JW Outlet: 5' Cat Flange

        • AC Inlet: 6' ANSI / AC Outlet: 3-1/2' ANSI

      • Exhaust

        • Dry exhaust manifold

        • Bolted flange (ANSI 6' & DIN 150) with bellow for each turbo (Qty 4). 50 Hz

      • Fuel

        • Filters x 3

        • Secondary / tertiary fuel filters

        • 4 Micron spin on type

        • 10 Micron spin on type

        • Engine mounted filters x 3

        • Primary fuel filter water / fuel water separator

      • Generators and Attachments

        • Salient Pole

        • RFI suppression

        • Anti condensation space Heater

        • IEC Platinum Stator RTDs

        • Form wound

        • NEMA Class H insulation

        • Voltage regulator:

        • Reactive droop capability

        • Min/max Exciter limiter

        • 3 Phase voltage sensing

        • Exciter diode monitor

        • 6 Leads

        • 3 Phase brushless

        • Right side extension box, bottom cable entry

        • Permanent magnet

        • Class H temperature rise at 40C ambient

      • Governing System

        • ADEM A4

        • Redundant Shutdown (Overspeed protection through a duplicate speed sensing system)

      • Lube System

        • Oil drain lines and valve

        • Gear type lube oil pump

        • Oil filter, filler and dipstick

        • Integral lube oil cooler

        • Lubricating oil

        • Fumes disposal

      • Mounting Systems

        • Rails - Engine / Generator

        • Rubber anti-vibration mounts (shipped loose)

      • Starting / Charging System

        • Batteries and battery rack w/cables

        • Dual 24 volt electric starting motors

        • Battery disconnect switch

      • General

        • SAE standard rotation

        • Right hand service

        • Paint - Caterpillar Yellow with high gloss black rails

      • Air Inlet Systems

      • Control Panels

        • EMCP 4.3 and EMCP 4.4

        • EMCP and MV and HV power connection locations

        • Load share module

        • EMCP voltage and current sensing groups

        • Speed adjust

        • Annunciator modules

        • Customer interface options

        • Generator temperature monitoring

        • E-Stop

        • Interconnect harness

        • Generator harness

        • Modbus monitoring of packages

        • Vandal proof panel door

      • Cooling System

        • Package mounted radiators

        • Remote radiators

        • Fuel cooler

      • Crankcase Systems

        • Explosive relief valves

        • Crankcase ventilation system

      • Exhaust System

        • Front housing - Standby or mission critical

        • Front housing - Prime or continuous

        • Exhaust collectors / Manifold

        • Mufflers (15, 25 and 34 dBA)

      • Fuel System

      • Generators and Attachments

        • Medium voltage - 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667

        • Thermostat for space heater

        • Generator air cleaner

        • Differential current transformers - (5, 9 and 15 kV Class)

      • Instrumentation

      • Lube System

        • Lube oil heater

        • Lube oil heater with crankcase explosion relief valve

        • Drain group oil pans

        • Lubricating oil

        • Electric prelube pumps

        • Oil filters

      • Mounting System

        • Rubber anti-vibration mounts

        • Spring type linear vibration isolators

        • IBC vibration isolators - Shipped loose

      • Special Tests / Reports

        • Generator test report

        • PGS test report @ 1.0 power factor

        • PGS test report @ 0.8 power factor

        • Standard genset TVA (Torsional Vibration Analysis) report

        • Custom genset TVA report

        • Special test charge - Engine only

        • Genset fuel consumption test

        • Standard engine test charge

      • Starting / Charging System

        • 24 Volt electric starting motors

        • Air starting motor

        • Air pressure regulator

        • Starter location covers

        • 24 Volt battery sets - Dry

        • 20, 35 and 50 Amp battery chargers

        • Charging alternators - Dry

        • Jacket water heaters

      • General

        • Special paint - 3500, Colors (other than Caterpillar yellow) or high performance paints

        • US aid emblem

        • Service tools

        • Engine barring group

        • Manual

        • Engine barring air powered

        • control GP - Air powered bar group

      Similar Models

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN