THIS IS MY SELECT
Industrial Diesel Engines
Cat ® 3054C Industrial Diesel Engine
Maximum Power
130 HP
Maximum Torque
369 lb-ft @ 1400 rpm
Emissions
93.0 hp
U.S. EPA Tier 2 Equivalent, EU Stage II Equivalent
THIS IS MY SELECT
backhoe loader
Cat ® 3054C Industrial Diesel Engine
Maximum Power
130 HP
Maximum Torque
369 lb-ft @ 1400 rpm
Emissions
93.0 hp
U.S. EPA Tier 2 Equivalent, EU Stage II Equivalent
Specifications
Cat ® 3054C Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of mechanical fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by 3054C engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment. 3054C engines, with ratings: 52-97 bkW (69.7-130 bhp) @ 2000-2400 rpm, meet U.S. EPA Tier 2 equivalent and EU Stage II equivalent emission standards and are available for non-regulated areas.
-
Maximum Power
130 HP
97 kW
Maximum Torque
369 lb-ft @ 1400 rpm
500 Nm @ 1400 rpm
Rated Speed
93.0 in
93.0 mm
2200-2400 rpm
Minimum Power
69.7 HP
52 kW
-
Emissions
93.0 in
93.0 mm
U.S. EPA Tier 2 Equivalent, EU Stage II Equivalent
-
Engine Configuration
93.0 in
93.0 mm
Inline 4, 4-Stroke-Cycle Diesel
Bore
4.1 in
105 mm
Stroke
5 in
127 mm
Displacement
269 in³
4.4 l
Compression Ratio
93.0 in
93.0 mm
16.2:1
Aspiration
93.0 in
93.0 mm
Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
Combustion System
93.0 in
93.0 mm
Direct Injection
Rotation from Flywheel End
93.0 in
93.0 mm
Counterclockwise
Aftertreatment
93.0 in
93.0 mm
-
-
Length
26.1 in
663 mm
Width
24.4 in
620 mm
Height
31.9 in
810 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
674.6 lb
306 kg
-
Air Inlet System
-
Control System
-
Alternator
-
Starter motor
-
Control Panel
-
Glow plug starting aid
-
-
Cooling System
-
Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
-
50:50 water glycol mix
-
-
Flywheels and Flywheel Housing
-
SAE No. 3 flywheel housing
-
Flywheel and starter rings
-
-
Fuel System
-
Lube System
-
Lubricating oil filters and breathers
-
Oil filter positions
-
Lube oil sump
-
-
Power Take Off
-
General
-
Timing case and gear-driven auxiliaries
-
Belt-driven auxiliaries
-
Engine mountings
-
Gauges
-
Displays
-
Power and torque curve tailoring
-
Paint: Caterpillar yellow, with optional colors available at request
-
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance