THIS IS MY SELECT
Industrial Diesel Engines
Cat ® C18 Diesel Engine
Maximum Power
800 HP
Maximum Torque
2,736 lb-ft @ 1300 rpm
Emissions
93.0 hp
EU Stage V
THIS IS MY SELECT
backhoe loader
Cat ® C18 Diesel Engine
Maximum Power
800 HP
Maximum Torque
2,736 lb-ft @ 1300 rpm
Emissions
93.0 hp
EU Stage V
Specifications
On construction sites and mining operations, in agriculture and forestry, and in a wide range of industries, Cat® C18 Industrial Diesel Engines deliver the power, performance and durability to take on the biggest challenges. More importantly, they're backed by the world-class Cat dealer network ready to service and support every Cat® industrial engine. Industries and applications powered by C18 engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers. This information about Emissions describes the particular rating's emissions technology. For more information about emissions certification, please contact your local Cat dealer.
-
Maximum Power
800 HP
597 kW
Maximum Torque
2,736 lb-ft @ 1300 rpm
3,710 Nm @ 1300 rpm
Rated Speed
93.0 in
93.0 mm
1800-2000
Minimum Power
575 HP
429 kW
-
Emissions
93.0 in
93.0 mm
EU Stage V
-
Engine Configuration
93.0 in
93.0 mm
In-Line 6
Bore
5.7 in
145 mm
Stroke
7.2 in
183 mm
Displacement
1,104.5 in³
18.1 l
Compression Ratio
93.0 in
93.0 mm
16.0:1
Aspiration
93.0 in
93.0 mm
Turbocharged-Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)
Combustion System
93.0 in
93.0 mm
Direct Injection
Rotation from Flywheel End
93.0 in
93.0 mm
Counterclockwise
Aftertreatment
93.0 in
93.0 mm
DOC or DOC+DPF+SCR
-
Length
56.6 in
1,438 mm
Width
44.6 in
1,132 mm
Height
53.4 in
1,356 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
3,785 lb
1,717 kg
-
Length
45.4 in
1,153 mm
Width
43.8 in
1,112 mm
Height
25.7 in
652 mm
Weight
600 lb
272 kg
-
Diameter
14 in
356 mm
-
Length
33.6 in
854 mm
Width
11.3 in
287 mm
Height
21.7 in
551 mm
Weight
42.8 lb
19.4 kg
Volume Capacity
51.1 qt (US)
48.4 l
-
Air Inlet System
-
Turbocharged
-
Air-to-Air Aftercooled
-
Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage V)
-
-
Control System
-
Electronic control system
-
Over-foam wiring harness
-
Automatic altitude compensation
-
Power compensated for fuel temperature
-
Remote fan control
-
Configurable software features
-
Engine monitoring system SAE J1939 broadcast and control
-
Integrated Electronic Control Unit (ECU)
-
-
Cooling System
-
Thermostats and housing, vertical outlet
-
Centrifugal water pump
-
Guidance on cooling system design available through your dealer to ensure equipment reliability
-
-
Flywheels and Flywheel Housing
-
Choice of SAE No. 0 or SAE No. 1 flywheel housing
-
Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage V).
-
-
Fuel System
-
MEUI injection
-
Primary fuel filter
-
Secondary fuel filters
-
Fuel transfer pump
-
Electronic fuel priming
-
-
Lube System
-
Open crankcase ventilation system
-
Oil cooler
-
Oil filler
-
Lube oil filter
-
Oil dipstick
-
Gear driven oil pump
-
Choice of front, rear or center sumps
-
Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage V)
-
-
Power Take Off (PTO)
-
General
-
U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment
-
Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
-
Cat Regeneration System
-
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
-
Aftertreatment Electronic Control Unit (ECU)
-
NOx Reduction System (NRS)
-
Pump Electronic Control Unit (PETU)
-
Selective Catalytic Reduction (SCR)
-
Available in 12V or 24V systems
-
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance