THIS IS MY SELECT

Industrial Diesel Engines

Cat ® C18 Industrial Diesel Engine

Maximum Power

800 HP

Maximum Torque

2,696 lb-ft @ 1400 rpm

Emissions

93.0 hp

China Nonroad III, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent, or Non-certified

THIS IS MY SELECT

backhoe loader

Cat ® C18 Industrial Diesel Engine

Maximum Power

800 HP

Maximum Torque

2,696 lb-ft @ 1400 rpm

Emissions

93.0 hp

China Nonroad III, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent, or Non-certified

Specifications

The Cat ® C18 Industrial Diesel Engine is offered in ratings ranging from 429-522 bkW (575-700 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, and EU Stage IIIA equivalent emission standards. Ratings: 571-597 bkW (765-800 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards. Non-certified ratings are also available at 429-522 bkW (575-700 bhp) @ 1800-2100. Industries and applications powered by C18 engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers, Grinders, Compactors, Rollers, Compressors, Construction, Cranes, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.

      • Maximum Power

        800 HP

        597 kW

        Maximum Torque

        2,696 lb-ft @ 1400 rpm

        3,655 Nm @ 1400 rpm

        Rated Speed

        93.0 in

        93.0 mm

        1800-2100 rpm

        Minimum Power

        575 HP

        429 kW

      • Emissions

        93.0 in

        93.0 mm

        China Nonroad III, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent, or Non-certified

      • Engine Configuration

        93.0 in

        93.0 mm

        Inline 6, 4-Stroke-Cycle Diesel

        Bore

        5.7 in

        145 mm

        Stroke

        7.2 in

        183 mm

        Displacement

        1,104.5 in³

        18.1 l

        Compression Ratio

        93.0 in

        93.0 mm

        16.3:1

        Aspiration

        93.0 in

        93.0 mm

        Turbocharged Aftercooled (TA)

        Combustion System

        93.0 in

        93.0 mm

        Direct Injection

        Rotation from Flywheel End

        93.0 in

        93.0 mm

        Counterclockwise

        Aftertreatment

        93.0 in

        93.0 mm

        -

      • Length

        55.7 in

        1,414 mm

        Width

        38.3 in

        974 mm

        Height

        49.5 in

        1,257 mm

        Weight - Net Dry - Basic Operating Engine Without Optional Attachments

        3,688 lb

        1,673 kg

      • Air Inlet System

        • Turbocharged Aftercooled (429-470 bkW, 575-630 bhp)

        • Twin Turbocharged Aftercooled (522-597 bkW, 700-800 bhp)

        • Air-to-Air Aftercooled

      • Charging System

      • Control System

        • Electronic governing, PTO speed control

        • Programmable ratings

        • Automatic altitude compensation

        • Power compensation for fuel temperature

        • Programmable low and high idle and total engine limit

        • Electronic diagnostics and fault logging

        • Engine monitoring system SAE J1939 broadcast and control

        • ADEM™ A4 Electronic Control Unit (ECU)

      • Cooling System

        • Thermostats and housing, vertical outlet

        • Jacket water pump, centrifugal

        • Water pump, inlet

      • Exhaust System

        • Exhaust manifold, dry

        • Optional exhaust outlet

      • Flywheels and Flywheel Housing

      • Fuel System

        • MEUI injection

        • Fuel filter, secondary (2 micron)

        • Fuel filter, tertiary (2 micron)

        • ACERT™ Technology

        • Fuel transfer pump

        • Fuel priming pump

      • Lube System

        • Crankcase breather

        • Oil cooler

        • Oil filler

        • Lube oil filter

        • Front sump oil pan

        • Oil dipstick

        • Gear driven oil pump

      • General

        • Vibration damper

        • Lifting eyes

        • Cold start capability to -20° C (-4° F)

        • Paint: Caterpillar yellow, with optional colors available at request

      Similar Models

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN