THIS IS MY SELECT
Industrial Diesel Engines
Cat ® C2.2 Diesel Engine
Maximum Power
66 HP
Maximum Torque
153 lb-ft @ 1800 rpm
Emissions
93.0 hp
U.S. EPA Tier 4 Interim Equivalent
THIS IS MY SELECT
backhoe loader
Cat ® C2.2 Diesel Engine
Maximum Power
66 HP
Maximum Torque
153 lb-ft @ 1800 rpm
Emissions
93.0 hp
U.S. EPA Tier 4 Interim Equivalent
Specifications
The Cat ® C2.2 Industrial Diesel Engine is offered in ratings ranging from 31-49.3 bkW (41.6-66.1 bhp) @ 2200-3000 rpm. These ratings meet EU Stage IIIA (U.S. EPA Tier 4 Interim equivalent) emission standards. Industries and applications powered by C2.2 engines include: Agriculture, Aerial Lifts, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, General Industrial, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Mobile Sweepers, Paving Equipment, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.
-
Maximum Power
66 HP
49.2 kW
Maximum Torque
153 lb-ft @ 1800 rpm
208 Nm @ 1800 rpm
Rated Speed
93.0 in
93.0 mm
2200-3000 rpm
Minimum Power
41.6 HP
31 kW
-
Emissions
93.0 in
93.0 mm
U.S. EPA Tier 4 Interim Equivalent
-
Engine Configuration
93.0 in
93.0 mm
Inline 4, 4-Stroke-Cycle Diesel
Bore
3.3 in
84 mm
Stroke
3.9 in
100 mm
Displacement
135 in³
2.216 l
Compression Ratio
93.0 in
93.0 mm
23.3:1
Aspiration
93.0 in
93.0 mm
Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
Combustion System
93.0 in
93.0 mm
Indirect Injection
Rotation from Flywheel End
93.0 in
93.0 mm
Counterclockwise
Aftertreatment
93.0 in
93.0 mm
-
-
Length
26 in
662 mm
Width
19.3 in
489 mm
Height
27.5 in
698 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
427.7 lb
194 kg
-
Air Inlet System
-
Control System
-
Alternator 12 volt 65 amp
-
Starter motor 12 volt
-
Glow plug starting aid
-
-
Cooling System
-
Belt-driven coolant pump
-
Coolant temperature switch
-
Choice of cooling fans
-
-
Flywheels and Flywheel Housing
-
SAE No. 7 1/2, SAE No. 8 or SAE No. 10 flywheel
-
Choice of SAE No. 4 or standard backplate flywheel housing
-
-
Fuel System
-
Fuel injection pump
-
Spin-on fuel filter
-
Electronic Shut-off Solenoid (ESOS)
-
-
Lube System
-
Alternative oil fillers
-
Spin-on lube oil filter
-
Lube oil pressure switch
-
Lube oil sump
-
-
General
-
Cast iron, engine block
-
Cast iron exhaust manifold--side outlet
-
Cold start capability to -20° C (-4° F)
-
Gradeability 35° continuous
-
Paint: Caterpillar yellow, with optional colors available at request
-
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance