THIS IS MY SELECT
Industrial Diesel Engines
Cat® C13 Diesel Engine
Maximum Power
520 HP
Maximum Torque
1,756 lb-ft @ 1400 rpm
Emissions
93.0 hp
U.S. EPA Tier 4 Final
THIS IS MY SELECT
backhoe loader
Cat® C13 Diesel Engine
Maximum Power
520 HP
Maximum Torque
1,756 lb-ft @ 1400 rpm
Emissions
93.0 hp
U.S. EPA Tier 4 Final
Specifications
The Cat® C13 Industrial Diesel Engine is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. Industries and applications powered by engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.
-
Maximum Power
520 HP
388 kW
Maximum Torque
1,756 lb-ft @ 1400 rpm
2,381 Nm @ 1400 rpm
Rated Speed
93.0 in
93.0 mm
1800-2100 rpm
Minimum Power
385 HP
287 kW
-
Emissions
93.0 in
93.0 mm
U.S. EPA Tier 4 Final
-
Engine Configuration
93.0 in
93.0 mm
In-Line 6
Bore
5.1 in
130 mm
Stroke
6.2 in
157 mm
Displacement
762.8 in³
12.5 l
Compression Ratio
93.0 in
93.0 mm
17.0:1
Aspiration
93.0 in
93.0 mm
Turbocharged-Aftercooled (TA)
Combustion System
93.0 in
93.0 mm
Direct Injection
Rotation from Flywheel End
93.0 in
93.0 mm
Counterclockwise
Aftertreatment
93.0 in
93.0 mm
DOC+DPF+SCR
-
Length
50 in
1,274 mm
Width
39 in
994 mm
Height
45 in
134 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
2,520 lb
1,143 kg
-
Length
42 in
1,059 mm
Width
41 in
1,049 mm
Height
26 in
654 mm
Weight
571 lb
259 kg
-
Length
33.6 in
854 mm
Width
11.3 in
287 mm
Height
21.7 in
551 mm
Weight
42.8 lb
19.4 kg
Volume Capacity
51.1 qt (US)
48.4 l
-
Air Inlet System
-
Turbocharged
-
Air-to-Air Aftercooled
-
Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
-
-
Control System
-
Electronic control system
-
Over-foam wiring harness
-
Automatic altitude compensation
-
Power compensated for fuel temperature
-
Configurable software features
-
Engine monitoring system SAE J1939 broadcast and control
-
Integrated Electronic Control Unit (ECU)
-
Remote fan control
-
-
Cooling System
-
Vertical or RH thermostat outlet
-
Centrifugal water pump
-
Guidance on cooling system design available through your dealer to ensure equipment reliability
-
-
Flywheels and Flywheel Housing
-
SAE No. 1 flywheel housing
-
Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
-
-
Fuel System
-
MEUI injection
-
Primary fuel filter
-
Secondary fuel filters
-
Fuel transfer pump
-
Electronic fuel priming
-
-
Lube System
-
Open crankcase ventilation system
-
Oil cooler
-
Oil filler
-
Lube oil filter
-
Oil dipstick
-
Gear driven oil pump
-
Choice of front, rear or center sumps
-
Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
-
-
Power Take Off (PTO)
-
General
-
U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
-
Cat Regeneration System
-
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
-
NOx Reduction System (NRS)
-
Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
-
Available in 12 volt or 24 volt systems
-
-
U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment
-
Cat Regeneration System
-
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
-
Aftertreatment Electronic Control Unit (ECU)
-
NOx Reduction System (NRS)
-
Pump Electronic Control Unit (PETU)
-
Selective Catalytic Reduction (SCR)
-
Available in 12V or 24V systems
-
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance