THIS IS MY SELECT
Industrial Diesel Power Units
Cat® C27 Industrial Power Unit
Maximum Power
630 HP
Emissions
93.0 hp
U.S. EPA Tier 4 Final, EU Stage V
Rated Speed
93.0 hp
1800-2000 rpm
THIS IS MY SELECT
backhoe loader
Cat® C27 Industrial Power Unit
Maximum Power
630 HP
Emissions
93.0 hp
U.S. EPA Tier 4 Final, EU Stage V
Rated Speed
93.0 hp
1800-2000 rpm
Specifications
The Cat ® C27 Industrial Power Unit is offered in ratings ranging from 597-783 bkW (800-1050 bhp)@ 1800 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
-
Maximum Power
630 HP
470 kW
Rated Speed
93.0 in
93.0 mm
1800-2000 rpm
Minimum Power
575 HP
429 kW
-
Emissions
93.0 in
93.0 mm
U.S. EPA Tier 4 Final, EU Stage V
-
Engine Configuration
93.0 in
93.0 mm
Inline 6, 4-Stroke-Cycle Diesel
Bore
5.7 in
145 mm
Stroke
7.2 in
183 mm
Displacement
1,104.5 in³
18.1 l
Compression Ratio
93.0 in
93.0 mm
16.0:1
Aspiration
93.0 in
93.0 mm
Turbocharged Aftercooled (TA)
Rotation from Flywheel End
93.0 in
93.0 mm
Counterclockwise
Aftertreatment
93.0 in
93.0 mm
DOC
-
Length
99.7 in
2,532 mm
Width
48.9 in
1,241 mm
Height
79 in
2,006 mm
Weight
5,842 lb
2,650 kg
-
Width
43.8 in
1,112 mm
Height
25.7 in
652 mm
Weight
591 lb
268 kg
-
Diameter
13 in
330 mm
-
Length
33.6 in
854 mm
Width
11.3 in
287 mm
Height
21.7 in
551 mm
Weight
42.8 lb
19.4 kg
Volume Capacity
51.1 qt (US)
48.4 l
-
Air Inlet System
-
Turbocharged
-
Air-to-Air Aftercooled
-
Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
-
-
Control System
-
Electronic control system
-
Over-foam wiring harness
-
Automatic altitude compensation
-
Power compensated for fuel temperature
-
Remote fan control
-
Configurable software features
-
Engine monitoring system SAE J1939 broadcast and control
-
Integrated Electronic Control Unit (ECU)
-
-
Cooling System
-
Thermostats and housing, vertical outlet
-
Centrifugal water pump
-
Guidance on cooling system design available through your dealer to ensure equipment reliability
-
-
Flywheels and Flywheel Housing
-
Choice of SAE No. 0 or SAE No. 1 flywheel housing
-
Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
-
-
Fuel System
-
MEUI injection
-
Primary fuel filter
-
Secondary fuel filters
-
Fuel transfer pump
-
Electronic fuel priming
-
-
Lube System
-
Open crankcase ventilation system
-
Oil cooler
-
Oil filler
-
Lube oil filter
-
Oil dipstick
-
Gear driven oil pump
-
Choice of front, rear or center sumps
-
Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
-
-
Power Take Off (PTO)
-
General
-
U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment
-
Cat Regeneration System
-
Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
-
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
-
Aftertreatment Electronic Control Unit (ECU)
-
NOx Reduction System (NRS)
-
Pump Electronic Control Unit (PETU)
-
Selective Catalytic Reduction (SCR)
-
Available in 12V or 24V systems
-
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance