THIS IS MY SELECT
Industrial Diesel Power Units
Cat® C3.6 Industrial Power Unit
Maximum Power
134 HP
Maximum Torque
406 lb-ft @ 1500 rpm
Emissions
93.0 hp
EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final)
THIS IS MY SELECT
backhoe loader
Cat® C3.6 Industrial Power Unit
Maximum Power
134 HP
Maximum Torque
406 lb-ft @ 1500 rpm
Emissions
93.0 hp
EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final)
Specifications
The C2.8 and C3.6 IPU engines are common rail direct injection engines with a turbocharged or turbocharged aftercooled air system meeting EU Stage V, U.S. EPA Tier 4 Final and Japan 2014 (Tier 4 Final) emission standards. For ease of installation, the IPU provides full aftertreatment mounting, an integrated cooling system, a full wiring harness and mounting for the ECM and fuel filter. Designed to meet EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final) emission standards.
-
Maximum Power
134 HP
100 kW
Maximum Torque
406 lb-ft @ 1500 rpm
550 Nm @ 1500 rpm
Rated Speed
93.0 in
93.0 mm
2000-2200 rpm
Minimum Power
94 HP
70 kW
-
Emissions
93.0 in
93.0 mm
EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final)
-
Number of Cylinders
93.0 in
93.0 mm
4 inline
Cycle
93.0 in
93.0 mm
4 stroke
Bore
3.85 in
98 mm
Stroke
4.72 in
120 mm
Displacement
219.7 in³
3.6 l
Compression Ratio
93.0 in
93.0 mm
17.0:1
Aspiration
93.0 in
93.0 mm
Turbocharged aftercooled
Combustion System
93.0 in
93.0 mm
Direct injection
Rotation from Flywheel End
93.0 in
93.0 mm
Anti-clockwise
Aftertreatment
93.0 in
93.0 mm
DOC+DPF+SCR
Cooling System
93.0 in
93.0 mm
Liquid
-
Length
46.3 in
1,177 mm
Width
31.8 in
808 mm
Height
40.8 in
1,036 mm
Dry Weight
1,214 lb
551 kg
-
Note 1
93.0 in
93.0 mm
*Final dimensions dependent on selected options
-
Aftertreatment Equipment
-
Aftertreatment mounted on engine as standard
-
Range of DEF tanks and DEF lines available
-
-
Air System
-
Cooling System
-
50:50 water glycol mix
-
Detailed guidance on cooling system design and validation available to ensure machine reliability
-
Engine mounted radiator with top tank temperature of 108°C (226°F)
-
Pusher or puller fan options
-
Radiator erosion screen is available
-
-
Electrical and Electronics
-
12V and 24V systems
-
Data interface via CANbus J1939
-
Instrument control panel available
-
Full electronic control
-
Glow plugs for best cold starting with minimum battery impact
-
High power alternator and starter motor options
-
Sensors and robust wiring harness included
-
-
Flywheel and Flywheel Housing
-
SAE3 flywheel housing and flywheel with pilot bore
-
Wide choice of interfaces for common transmissions and hydraulic pumps
-
-
Fuel System
-
Electronic high pressure common rail
-
Fuel filter - IOPU mounted
-
Standard and heavy duty fuel filtration
-
Water sensor included - early warning for operator
-
-
General
-
Cold-start capable with standard equipment to -25°C
-
Supplied painted or lacquered
-
-
Oil System
-
Oil filters - mounting options available on either side of the engine, plus remote
-
Dipsticks - choice of position and length
-
High incline sump. 35° continuous in all directions. Suitable for machines that are used on steep slopes
-
-
Power Take-Off (PTO)
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance