THIS IS MY SELECT

Commercial Propulsion Engines

3512C Tier 3 Marine Propulsion Engine

Power Range

93.0 hp

1340-2366 bhp (1000-1765 bkW)

Speed Range

93.0 hp

1600-1800 rpm

Emissions

93.0 hp

EPA Tier 3, IMO II

THIS IS MY SELECT

backhoe loader

3512C Tier 3 Marine Propulsion Engine

Power Range

93.0 hp

1340-2366 bhp (1000-1765 bkW)

Speed Range

93.0 hp

1600-1800 rpm

Emissions

93.0 hp

EPA Tier 3, IMO II

Specifications

The 3512C High Displacement marine engines are now available in a wide range of ratings that meet EPA Marine Tier 3 and IMO II regulations without any additional aftertreatment. These new propulsion, auxiliary, and DEP engines, designed and built from the current 3512C and 3516C platforms, have minimal dimensional and weight changes in comparison. Owning and operating costs are also very similar. For the specific fuel consumption of each rating please refer to the performance data. New features include stainless steel exhaust heat shields, closed crankcase ventilation system, and EPA Tier 3 compliance.

      • Power Range

        93.0 in

        93.0 mm

        1340-2366 bhp (1000-1765 bkW)

      • Speed Range

        93.0 in

        93.0 mm

        1600-1800 rpm

        Emissions

        93.0 in

        93.0 mm

        EPA Tier 3, IMO II

        Aspiration

        93.0 in

        93.0 mm

        TTA

        Bore

        6.69 in

        170 mm

        Stroke

        8.46 in

        215 mm

        Displacement

        3,574 in³

        58.6 l

        Rotation from Flywheel End

        93.0 in

        93.0 mm

        Counterclockwise or Clockwise

        Configuration

        93.0 in

        93.0 mm

        Vee 12, 4-Stroke-Cycle Diesel

      • Minimum Dry Weight

        16,508 lb

        7,488 kg

        Minimum Length

        104.2 in

        2,465 mm

        Maximum Length

        104.2 in

        2,465 mm

        Minimum Height

        87.5 in

        2,222.6 mm

        Maximum Height

        87.5 in

        2,222.6 mm

        Minimum Width

        80.2 in

        2,037 mm

        Maximum Width

        80.2 in

        2,037 mm

      • Air Inlet System

        • Separate circuit aftercooler core, corrosion resistant coated (air side)

        • Powercore air cleaner

      • Control System

        • Dual Caterpillar A4 Electronic Engine Control with Electronic Unit Injector Fuel System

        • Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)

      • Exhaust System

      • Fuel System

        • Fuel transfer pump

        • Electronically Controlled Unit Injectors

      • Lube System

        • Crankcase breather groups, Top mounted

        • Oil filler and dipstick, LH or RH

        • Oil pump, gear type

        • 250 or 1000 hour sump oil pan

      • Mounting System

      • Power Takeoffs

        • Accessory drives: Lower RH, lower LH

        • Front housing, two-sided

      • Protection System

        • A4 Electronic Monitoring System provides customer programmable engine derating strategies to protect against adverse operating conditions

        • Emergency stop push button (located in Electronic Instrument Panel)

        • Safety shutoff protection:

      • General

        • Vibration damper and guard

        • Lifting eyes

        • NOTE: Engines for heat exchanger cooling do NOT include heat exchange

      • Flywheel and Flywheel Housing

        • Flywheel, SAE No. 00, 183 teeth

        • Flywheel housing, SAE No. 00

      • Cooling System

        • Oil cooler

        • Thermostats and housing, Full open temperature 92 C (198 F)

        • Jacket water pump, gear driven, centrifugal

        • Auxiliary fresh water pump

        • Aftercooler system: If using glycol, up to maximum 20% glycol concentration is allowed

      • Instrumentation

        • Electronic service meter, instrument panel (24V), start/stop switch, emergency stop button, maintenance due light, diagnostic light, warning light, maintenance clear switch, start motor magnetic switch, 15 and 3A breakers

        • Graphical Unit (Color Marine Power Display) for analog or digital of:

      • Air Inlet System

      • Charging System

        • Battery Chargers

        • Charging Alternator

      • Control System

      • Cooling System

        • Coolant Shunt Tank

        • Cooling System Options

      • Exhaust System

        • Flexible Fittings

        • Elbows

        • Flanges

        • Flange and Exhaust Expanders

        • Mufflers

      • Fuel System

        • Fuel Cooler Heat Exchanger - Sea Water

        • Primary Fuel Filter

        • Fuel Level Switch

        • Rigid Fuel Lines

        • Flexible Fuel Lines

      • Instrumentation

        • Communication Modules

        • Color Marine Power Display System

        • Pilot House Instrument Panels

        • Marine Gear Sensors

      • Lube System

        • Sump Pumps

        • Lubricating Oil

      • Power Take-Offs

        • Stub Shafts

        • Crankshaft Pulleys

        • Damper Guard

        • Flexible Coupling and Guards

      • Marine Society Requirements

        • Green Passport Documentation

        • Spray Shielding

      • Protection System

      • Special Appearance Packages

        • Special Appearance Packages with Chrome Covers

        • Yacht Class Finish

      • Starting System

        • Air Starting Motor Options

        • Battery Sets - 24 Volt - Dry

        • Battery Rack

      • Mounting System

        • Engine Supports

        • Vibration Isolation Mountings

      • Paints

      • Packing

        • Shrink Wrap Protection

        • Storage Preservation with Glycol Solution/Vapor Corrosion Inhibitor

        • Export Boxing

        • Export Packaging

      Similar Models

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN