THIS IS MY SELECT
High Performance Propulsion and Maneuvering Solutions
C32B Tier 3 Recreational
Power Range
93.0 hp
2000 bhp (1491 bkW)
Speed Range
93.0 hp
2300 rpm
Emissions
93.0 hp
EPA Tier 3, IMO II
THIS IS MY SELECT
backhoe loader
C32B Tier 3 Recreational
Power Range
93.0 hp
2000 bhp (1491 bkW)
Speed Range
93.0 hp
2300 rpm
Emissions
93.0 hp
EPA Tier 3, IMO II
Specifications
All new from the block up and built on the proven C32 platform, the C32B marine engine delivers more power, more speed, more time on the water and more peace of mind. All that comes in a quieter package with only a 2% increase in weight compared to the previous model — making the C32B the right choice for new builds and repowers. Rated at 2025 mhp (2000 bhp) / 1491 bkW @ 2300 rpm, the C32B meets U.S. EPA Marine Tier 3 and IMO II emissions standards. With an E Tier rating, it can run at the full 2000hp up to 8% of the time.
-
Power Range
93.0 in
93.0 mm
2000 bhp (1491 bkW)
-
Speed Range
93.0 in
93.0 mm
2300 rpm
Emissions
93.0 in
93.0 mm
EPA Tier 3, IMO II
Aspiration
93.0 in
93.0 mm
TTA
Bore
5.71 in
145 mm
Stroke
6.38 in
162 mm
Displacement
1,959 in³
32.1 l
Rotation from Flywheel End
93.0 in
93.0 mm
Counterclockwise
Configuration
93.0 in
93.0 mm
Vee 12, 4-Stroke-Cycle Diesel
-
Width
58.3 in
1,482 mm
Dry Weight
6,780 lb
3,145 kg
Length
82.9 in
2,106 mm
Height
56.9 in
1,445 mm
-
AIR INLET SYSTEM
-
Air Cleaner System with washable filter elements and fumes disposal (closed system)
-
Turbocharger, jacket water cooled
-
Turbocharger inlet, 152 mm (6 in) OD straight connection
-
-
CONTROL SYSTEM
-
Programmable Low Idle (550 - 750 rpm)
-
Electronic diagnostics and fault logging
-
Engine and transmission monitoring (speed, temperature, pressure)
-
Electronic fuel/air ratio control
-
Engine Protection Mode for extended ambient conditions
-
70-pin customer connector (Upper front-facing customer wiring connector and Service Tool connection)
-
Throttle Input signal options
-
-
COOLING SYSTEM
-
Sea Water Aftercooled Engine
-
Jacket water pump, gear driven
-
Sea water pump, rubber impeller, gear driven
-
Sea water Pump & JW Heat Exchanger Connection: 76.2 mm (3in) OD
-
Coolant recovery system
-
-
EXHAUST SYSTEM
-
Water-cooled exhaust manifold & turbocharger
-
4 Bolt 130 mm (5.12 in) diameter flanged outlet
-
-
FLYWHEELS & FLYWHEEL HOUSINGS
-
FUEL SYSTEM
-
Simplex Fuel Filters Spin-on, RH & LH service
-
Fuel connections size:
-
Plate Type Fuel Cooler (Jacket Heat Exchanger)
-
Fuel transfer pump, gear driven
-
Manual fuel priming pump
-
Hybrid fuel line design
-
-
LUBE SYSTEM
-
Simplex Oil Filters, RH or LH service
-
RH or LH service oil filler locations
-
RH or LH service dipstick
-
Oil pump, gear driven
-
Shallow Sump
-
-
MOUNTING SYSTEM
-
POWER TAKE-OFFS
-
GENERAL
-
Lifting eyes
-
Front damper guard
-
RH or LH service options
-
-
EXHAUST SYSTEM
-
Muffler
-
Muffler Spark Arresting
-
-
CHARGING SYSTEM
-
Battery Chargers
-
Charging Alternators
-
Ammeter
-
-
FUEL SYSTEM
-
INSTRUMENTATION
-
Instrument Panels
-
OEM Wiring Harness
-
Engine to Engine Harness
-
Gauges
-
Transmission Sensors
-
Exhaust Temperature Sensors
-
-
LUBE SYSTEM
-
MOUNTING SYSTEM
-
Adapter Kits
-
Isolator Mounts
-
-
POWER TAKE-OFFS
-
PROTECTION SYSTEM
-
STARTING SYSTEM
-
Electric Starting Motors - Single 24 Volt
-
Starting Aids - JW Heaters
-
Battery Sets - 24 Volt - Dry
-
-
CONTROL SYSTEM
-
PACKING
-
Engine Protective Cover
-
Storage Preservation
-
Export Packing
-
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance