THIS IS MY SELECT
High Performance Propulsion and Maneuvering Solutions
Cat C18 ACERT High Performance Propulsion Engine (Tier 3 Recreational)
Power Range
93.0 hp
1015-1150 mhp, 1001-1136 bhp, 747-847 bkW
Speed Range
93.0 hp
2300 rpm
Emissions
93.0 hp
EPA Tier 3, IMO II, EU IW
THIS IS MY SELECT
backhoe loader
Cat C18 ACERT High Performance Propulsion Engine (Tier 3 Recreational)
Power Range
93.0 hp
1015-1150 mhp, 1001-1136 bhp, 747-847 bkW
Speed Range
93.0 hp
2300 rpm
Emissions
93.0 hp
EPA Tier 3, IMO II, EU IW
Specifications
The C18 ACERT marine propulsion engine has ratings for recreational applications that meet U.S. EPA Tier 3, IMO II, and EU Stage IIIA Regulations. This marine engine incorporates the latest core engine system innovations to provide maximum benefits in power density, performance, emissions, and fuel efficiency. Not only is it equipped with engine monitoring and protection features, it is also compatible with Cat display and vessel control systems. With this engine comes the unmatched worldwide marine support network including Cat dealers and hundreds of authorized marine dealers. Their combined experience and expertise, products and services, backup and support allow your recreational pleasure craft to remain precisely that — a pleasure.
-
Power Range
93.0 in
93.0 mm
1015-1150 mhp, 1001-1136 bhp, 747-847 bkW
-
Speed Range
93.0 in
93.0 mm
2300 rpm
Emissions
93.0 in
93.0 mm
EPA Tier 3, IMO II, EU IW
Aspiration
93.0 in
93.0 mm
TA,TTA
Bore
5.7 in
145 mm
Stroke
7.2 in
183 mm
Displacement
1,106 in³
18.1 l
Rotation from Flywheel End
93.0 in
93.0 mm
Counterclockwise
Configuration
93.0 in
93.0 mm
In-line 6, 4-Stroke-Cycle Diesel
-
Maximum Height
51.2 in
1,300 mm
Maximum Dry Weight
4,299 lb
47.4 kg
Maximum Width
47.4 in
1,204 mm
Maximum Length
76 in
1,931 mm
Minimum Length
73 in
1,854 mm
Minimum Dry Weight
4,000 lb
44.6 kg
Minimum Width
44.6 in
1,134 mm
Minimum Height
47.2 in
1,198 mm
-
AIR INLET SYSTEM
-
Aftercooler - sea water, corrosion resistant
-
Air cleaner/fumes disposal (closed system)
-
Turbocharger, jacket water cooled
-
Front-down and rear-down aftercooler condensate drains
-
-
CONTROL SYSTEM
-
Electronic diagnostics and fault logging
-
Cold mode start strategy
-
Engine and transmission monitoring (speed, temperature, pressure)
-
Electronic fuel/air ratio control
-
70-pin customer connector
-
Engine Protection Mode for High Ambient Conditions
-
Three types of throttle inputs (primary/ secondary PWM, 0-5V, 4-20mA +/-)
-
-
COOLING SYSTEM
-
Sea water pump, rubber impeller, self-priming, gear driven
-
Sea water aftercooled
-
Jacket water pump, gear driven
-
JW Heat Exchanger - Titanium plate with integral fuel cooler expansion tank, and thermostat housing (fully open temp 92C)
-
Coolant recovery system
-
-
EXHAUST SYSTEM
-
Water-cooled exhaust manifold & turbocharger
-
114.3 mm (4.5 in) ID round flanged exhaust outlet
-
-
FLYWHEELS & FLYWHEEL HOUSINGS
-
Flywheel Housing, SAE No. 1
-
Flywheel, 18 inch, 113 teeth
-
SAE standard rotation
-
-
FUEL SYSTEM
-
Fuel filter, RH service on Port, LH service on Starboard
-
Fuel transfer pump
-
Fuel priming pump
-
Hybrid fuel line design
-
-
LUBE SYSTEM
-
Crankcase breather
-
Oil cooler
-
Oil filter, spin-on, low profile, RH service on Port, LH service on
-
Oil pan, center sump
-
Dipstick, RH service on Port, LH service on Starboard
-
Oil pump, gear driven
-
-
POWER TAKE-OFFS
-
Hydraulic pump drive, SAE A, 11-tooth spline, 46 ft-lbs max torque, counterclockwise as viewed from the front of the engine with 1.41 x engine speed
-
Crankshaft pulley, 292 mm (11.5 in) two groove, 15.88 mm (0.63 in) width
-
-
PROTECTION SYSTEM
-
GENERAL
-
Front damper guard
-
Lifting eyes
-
RH or LH service options
-
Upper rear-facing customer wiring connector and Service Tool connection
-
-
CHARGING SYSTEM
-
Battery Chargers
-
Charging Alternators
-
-
FUEL SYSTEM
-
Primary Fuel Filter / Water Separator
-
Primary Fuel Filter
-
-
LUBE SYSTEM
-
POWER TAKE-OFFS
-
STARTING SYSTEM
-
Electric Starting Motor - Single 24 Volt
-
Battery Sets - 24 Volt - Dry
-
-
CONTROL SYSTEM
-
INSTRUMENTATION
-
OEM Wiring Harness
-
Engine to Engine Harness
-
Instrument Panels
-
Transmission Sensors
-
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance