THIS IS MY SELECT

High Performance Propulsion and Maneuvering Solutions

Cat C18 ACERT High Performance Propulsion Engine (Tier 3)

Power Range

93.0 hp

814-1015 mhp, 803-1001 bhp, 599-747 bkW

Speed Range

93.0 hp

2100-2300 rpm

Emissions

93.0 hp

EPA Tier 3, IMO II, EU Stage IIIA

THIS IS MY SELECT

backhoe loader

Cat C18 ACERT High Performance Propulsion Engine (Tier 3)

Power Range

93.0 hp

814-1015 mhp, 803-1001 bhp, 599-747 bkW

Speed Range

93.0 hp

2100-2300 rpm

Emissions

93.0 hp

EPA Tier 3, IMO II, EU Stage IIIA

Specifications

The C18 ACERT marine propulsion engine has high performance commercial application ratings of 814-1015 mhp (803-1001 bhp) at 2100-2300 rpm that meet U.S. EPA Tier 3, IMO II, and EU Stage IIIA emissions regulations. In addition to meeting the stricter EPA Tier 3 emissions, this engine now offers a fresh water aftercooled option for the commercial propulsion and auxiliary engines and genset packages. From fishing to offshore and everything in between, you can be confident that we have the solution to fit your needs.

      • Power Range

        93.0 in

        93.0 mm

        814-1015 mhp, 803-1001 bhp, 599-747 bkW

      • Speed Range

        93.0 in

        93.0 mm

        2100-2300 rpm

        Emissions

        93.0 in

        93.0 mm

        EPA Tier 3, IMO II, EU Stage IIIA

        Aspiration

        93.0 in

        93.0 mm

        TA,TTA

        Bore

        5.7 in

        145 mm

        Stroke

        7.2 in

        183 mm

        Displacement

        1,106 in³

        18.1 l

        Rotation from Flywheel End

        93.0 in

        93.0 mm

        Counterclockwise

        Configuration

        93.0 in

        93.0 mm

        In-line 6, 4-Stroke-Cycle Diesel

      • Maximum Length

        76 in

        1,931 mm

        Minimum Length

        73 in

        1,854 mm

        Maximum Dry Weight

        4,299 lb

        1,950 kg

        Minimum Height

        47.2 in

        1,198 mm

        Maximum Width

        47.4 in

        1,204 mm

        Minimum Dry Weight

        4,000 lb

        1,814 kg

        Maximum Height

        51.2 in

        1,300 mm

        Minimum Width

        44.6 in

        1,134 mm

      • AIR INLET SYSTEM

        • Separate circuit after-cooled (SCAC)

        • Open Crankcase Ventilation (OCV) system

        • Turbocharger, jacket water cooled

        • Turbocharger inlet, 152 mm (6 in) OD straight connection

      • COOLING SYSTEM

        • Separate Circuit After-Cooling (SCAC) for both HEX and Keel cooled engines

        • Engine JW and SCAC Shell & Tube Heat Exchangers for HEX cooled engines

        • SCAC pump, gear driven, for HEX cooled engines only

        • Jacket water pump, gear driven

        • Sea water pump, bronze impeller, gear driven

        • SCAC and JW shunt tanks for maintaining proper pump inlet pressures

      • EXHAUST SYSTEM

        • Water-cooled exhaust manifold & turbocharger

        • 152 mm (6 in) round flanged outlet

      • FLYWHEELS & FLYWHEEL HOUSINGS

        • Flywheel Housing, SAE No. 0

        • Flywheel, 18 inch, 136 teeth

        • SAE standard rotation

        • SAE No. 1, Flywheel: 14 inch, 113 teeth

      • FUEL SYSTEM

        • Front service simplex fuel system

        • Fuel transfer pump, gear driven

        • Manual fuel priming pump

        • Hybrid fuel line design

      • LUBE SYSTEM

        • Front service simplex oil system

        • Center sump oil pan:

        • Front and top service oil filler locations

        • Front service dipstick

        • Oil pump, gear driven

      • POWER TAKE-OFFS

        • Poly-V groove for alternator drive

        • NOTE: There are no standard power take-offs available

      • GENERAL

        • Front damper guard

        • Front service engine

        • Common electrical bonding point

        • Engine does not ship with zinc components

        • Engine is certified to D2/E2 emissions cycles

        • CERTIFIED TO 2013 EPA TIER 3 AND IMO II MARINE COMMERCIAL PROPULSION (E3 CYCLE) EMISSION STANDARDS

        • CERTIFIED TO EU STAGE IIIA AND CCNR STAGE II (E3 CYCLE) EMISSIONS STANDARDS.

        • NOTE: Ratings listed below can also be used in Recreational / Pleasure Craft applications.

      • CONTROL SYSTEM

        • Programmable low idle

        • WOSR (Wide Operating Speed Range) available for EPA Tier 3 - B and C Ratings

        • Adjustable High Idle (TEL) - EPA Tier 3 WOSR Ratings Only

        • Electronic diagnostics and fault logging

        • Engine and transmission monitoring (speed, temperature, pressure)

        • Electronic fuel/air ratio contro

        • Engine Protection Mode for extended ambient conditions - EPA Tier 3 Ratings Only

        • Torque Limiting functionality for WOSR ratings only

        • 70-pin customer connector

        • Three types of throttle inputs (primary/ secondary PWM, 0-5V, 4-20mA +/-

      • EXHAUST SYSTEM

        • Dry Elbows

        • Water-Cooled Elbows

        • Flexible Fitting

        • Flange

        • Muffler

        • Muffler Spark Arresting

      • CHARGING SYSTEM

        • Battery Chargers

        • Charging Alternators

        • Alternator Mounting Group

        • Ammeter

      • CONTROL SYSTEM

        • MECP I

        • CATERPILLAR ALARM AND PROTECTION

      • COOLING SYSTEM

      • FUEL SYSTEM

        • Duplex Fuel Filters

        • Flexible Fuel Lines

        • Fuel Cooler

        • Primary Fuel Filters

      • INSTRUMENTATION

        • Instrument Panels

        • OEM Wiring Harness

        • Engine to Engine Harness

        • Gauges

        • Transmission Sensors

        • Oil Level Sensor

      • LUBE SYSTEM

        • Duplex Oil Filters

        • Transmission Oil Cooler

        • Sump Pump

      • MOUNTING SYSTEM

        • Vibration Isolators

        • Front Support

        • Rear Support

      • POWER TAKE-OFFS

        • NOTE: PTO OPTIONS REQUIRE TORSIONAL VIBRATION ANALYSIS

        • Crankshaft Pulleys

        • Front Stub Shaft

        • Hydraulic Pump Drive Adapter

        • Front Enclosed Clutch

      • PROTECTION SYSTEM

        • Marine Classification Society and SOLAS

        • Marine Classification Society and Fire Resistance

      • STARTING SYSTEM

        • STARTING SYSTEM Electric Starting Motors - Single 24 Volt

        • Air Starting Motor

        • Air Start Accessories

        • Starting Aids - JW Heaters

        • Battery Sets - 24 Volt - Dry

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN