THIS IS MY SELECT

High Performance Propulsion and Maneuvering Solutions

Cat C32 ACERT High Performance Marine Propulsion Engine (Tier 3 Rec)

Power Range

93.0 hp

1600-1900 bhp (1193-1417 bkW)

Speed Range

93.0 hp

2300 rpm

Emissions

93.0 hp

EPA Tier 3, IMO II, EU IW

THIS IS MY SELECT

backhoe loader

Cat C32 ACERT High Performance Marine Propulsion Engine (Tier 3 Rec)

Power Range

93.0 hp

1600-1900 bhp (1193-1417 bkW)

Speed Range

93.0 hp

2300 rpm

Emissions

93.0 hp

EPA Tier 3, IMO II, EU IW

Specifications

C32 ACERT propulsion engine ratings of 1925 mhp (1900 bhp) 1417 bkW, 1825 mhp (1800 bhp) 1342 bkW, and 1622 mhp (1600 bhp) 1193 bkW are available with heat exchanger cooling. These ratings are compliant for U.S. EPA Tier 3 Recreational, EU Stage IIIA, and IMO II. The 1600 and 1800 bhp ratings are also meet US EPA Tier 3 Commercial Standards. The engine configuration includes an air cleaner and CCV system as well as jacket water aftercooling. Additional features include a “plug-in PTO”, an MECP I control panel, and hybrid fuel lines. The MECP I panel has a monochrome display for engine parameters, external outputs for customer installed visible and audible alarms, Start/Stop buttons, and an Off/Local/Remote switch.

      • Power Range

        93.0 in

        93.0 mm

        1600-1900 bhp (1193-1417 bkW)

      • Speed Range

        93.0 in

        93.0 mm

        2300 rpm

        Emissions

        93.0 in

        93.0 mm

        EPA Tier 3, IMO II, EU IW

        Aspiration

        93.0 in

        93.0 mm

        TTA

        Bore

        5.71 in

        145 mm

        Stroke

        6.38 in

        162 mm

        Displacement

        1,959 in³

        32.1 l

        Rotation from Flywheel End

        93.0 in

        93.0 mm

        Counterclockwise

        Configuration

        93.0 in

        93.0 mm

        Vee 12, 4-Stroke-Cycle Diesel

      • Length

        82.9 in

        2,106 mm

        Width

        58.3 in

        1,482 mm

        Height

        56.9 in

        1,445 mm

        Dry Weight

        6,780 lb

        3,075 kg

      • AIR INLET SYSTEM

        • Air Cleaner System with washable filter elements and fumes disposal (closed system)

        • Turbocharger, jacket water cooled

        • Turbocharger inlet, 152 mm (6 in) OD straight connection

      • CONTROL SYSTEM

        • Programmable Low Idle (550 - 750 rpm)

        • Electronic diagnostics and fault logging

        • Engine and transmission monitoring (speed, temperature, pressure)

        • Electronic fuel/air ratio control

        • Engine Protection Mode for extended ambient conditions

        • 70-pin customer connector (Upper front-facing customer wiring connector and Service Tool connection)

        • Throttle Input signal options

      • COOLING SYSTEM

        • Sea Water Aftercooled Engine

        • Jacket water pump, gear driven

        • Sea water pump, rubber impeller, gear driven

        • Sea water Pump & JW Heat Exchanger Connection: 76.2 mm (3in) OD

        • Coolant recovery system

      • EXHAUST SYSTEM

        • Water-cooled exhaust manifold & turbocharger

        • 4 Bolt 130 mm (5.12 in) diameter flanged outlet

      • FLYWHEELS & FLYWHEEL HOUSINGS

      • FUEL SYSTEM

        • Simplex Fuel Filters Spin-on, RH & LH service

        • Fuel connections size:

        • Plate Type Fuel Cooler (Jacket Heat Exchanger)

        • Fuel transfer pump, gear driven

        • Manual fuel priming pump

        • Hybrid fuel line design

      • LUBE SYSTEM

        • Simplex Oil Filters, RH or LH service

        • RH or LH service oil filler locations

        • RH or LH service dipstick

        • Oil pump, gear driven

        • Shallow Sump

      • MOUNTING SYSTEM

      • POWER TAKE-OFFS

      • GENERAL

        • Lifting eyes

        • Front damper guard

        • RH or LH service options

      • EXHAUST SYSTEM

        • Muffler

        • Muffler Spark Arresting

      • CHARGING SYSTEM

        • Battery Chargers

        • Charging Alternators

        • Ammeter

      • FUEL SYSTEM

      • INSTRUMENTATION

        • Instrument Panels

        • OEM Wiring Harness

        • Engine to Engine Harness

        • Gauges

        • Transmission Sensors

        • Exhaust Temperature Sensors

      • LUBE SYSTEM

      • MOUNTING SYSTEM

        • Adapter Kits

        • Isolator Mounts

      • POWER TAKE-OFFS

      • PROTECTION SYSTEM

      • STARTING SYSTEM

        • Electric Starting Motors - Single 24 Volt

        • Starting Aids - JW Heaters

        • Battery Sets - 24 Volt - Dry

      • CONTROL SYSTEM

      • PACKING

        • Engine Protective Cover

        • Storage Preservation

        • Export Packing

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN