THIS IS MY SELECT

Marine Generator Sets

Cat C32 Generator Set (US EPA Tier 4 / IMO III)

Minimum Rating

93.0 hp

282 ekW

Maximum Rating

93.0 hp

940 ekW

Frequency

93.0 hp

60hz

THIS IS MY SELECT

backhoe loader

Cat C32 Generator Set (US EPA Tier 4 / IMO III)

Minimum Rating

93.0 hp

282 ekW

Maximum Rating

93.0 hp

940 ekW

Frequency

93.0 hp

60hz

Specifications

Marine

      • Configuration

        93.0 in

        93.0 mm

        Vee-12, 4-stroke-Cycle-Diesel

        Aspiration

        93.0 in

        93.0 mm

        Turbocharged-aftercooled aspiration

        Bore

        5.71 in

        145 mm

        Stroke

        6.38 in

        162 mm

        Displacement

        1,959 in³

        32.1 l

        Emissions

        93.0 in

        93.0 mm

        U.S. EPA Tier 4 Final certified / IMO III emissions certified (SCR required)

        Rated Engine Speed

        93.0 in

        93.0 mm

        1800 rpm

        Governor

        93.0 in

        93.0 mm

        Electronic (A5 ECM)

        Generator

        93.0 in

        93.0 mm

        SR5 - Form Wound

        Cooling

        93.0 in

        93.0 mm

        Heat exchanger, keel or radiator cooled

        Oil Change Interval

        93.0 in

        93.0 mm

        750 hrs

        Refill Capacity

        93.0 in

        93.0 mm

        Lube Oil System w/ oil filter change: 146 L (38.5 gal)

      • Minimum Rating

        93.0 in

        93.0 mm

        282 ekW

        Maximum Rating

        93.0 in

        93.0 mm

        940 ekW

        Frequency

        93.0 in

        93.0 mm

        60hz

      • Length

        93.0 in

        93.0 mm

        167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)

        Width

        93.0 in

        93.0 mm

        59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)

        Height

        93.0 in

        93.0 mm

        70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)

        Engine Dry Weight

        93.0 in

        93.0 mm

        15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

      • 6 Brick Z-Flow - Length

        147.7 in

        3,751 mm

        Dosing Cabinet - Weight

        209 lb

        95 kg

        6 Brick Z-Flow - Weight

        1,246 lb

        565 kg

        6 Brick U-Flow - Weight

        1,235 lb

        560 kg

        Dosing Cabinet - Height

        22.8 in

        579 mm

        6 Brick U-Flow - Width

        56.9 in

        1,445 mm

        6 Brick U-Flow - Length

        85 in

        2,159 mm

        Dosing Cabinet - Width

        18.8 in

        477 mm

        6 Brick Z-Flow - Width

        43.5 in

        1,106 mm

        6 Brick U-Flow - Height

        23.5 in

        597 mm

        Dosing Cabinet - Length

        37.4 in

        949 mm

        6 Brick Z-Flow - Height

        23.5 in

        597 mm

      • AIR INLET SYSTEM

        • Separate circuit aftercooled (SCAC)

        • Closed crankcase fumes disposal

      • CONTROL SYSTEM

      • COOLING SYSTEM

        • Heat exchanger or Keel Cooling

        • Watercooled exhaust manifold and turbocharger

        • Hard seawater lines – no flexible hoses

        • Flanges for cooling connections, ANSI or DIN

      • FUEL SYSTEM

        • Duplex fuel filters with hybrid fuel lines

        • Primary fuel filter with water separator installed on base frame

      • GENERATORS AND GENERATOR ATTACHMENTS

      • LUBE SYSTEM

      • MOUNTING SYSTEM

      • GENERAL

        • Right or left hand service sides

        • Customer wiring and service tool connector

      • ALARM AND PROTECTION

        • MGCP III B control panel with Cat® Alarm and Protection System

        • IP44 generator protection

      • EXHAUST SYSTEM

        • Muffler

        • Water-in-fuel and exhaust temperature sensors

        • SOLAS approved spray shielding

      • CHARGING SYSTEM

      • FUEL SYSTEM

        • Manual or electric fuel priming pump

        • Fuel cooler

      • LUBE SYSTEM

      • STARTING SYSTEM

      Similar Models

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN