THIS IS MY SELECT

Gas Compression Electric Motors

CN1566 Electric Motor

Voltage/Frequency

93.0 hp

4000V ± 10%/60 Hz

Type of EX-Protection

93.0 hp

Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)

Mounting Designation

93.0 hp

F1 or F2

THIS IS MY SELECT

backhoe loader

CN1566 Electric Motor

Voltage/Frequency

93.0 hp

4000V ± 10%/60 Hz

Type of EX-Protection

93.0 hp

Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)

Mounting Designation

93.0 hp

F1 or F2

Specifications

Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.

      • Voltage/Frequency

        93.0 in

        93.0 mm

        4000V ± 10%/60 Hz

        Type of EX-Protection

        93.0 in

        93.0 mm

        Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)

        Mounting Designation

        93.0 in

        93.0 mm

        F1 or F2

        Number of Poles

        6 poles

        6 poles

        Electric Motor Type

        93.0 in

        93.0 mm

        Squirrel Cage Induction Motor

        Full Load Speed

        1,189 r/min

        1,189 r/min

        Shaft

        5.1 in

        130 mm

        Standards

        93.0 in

        93.0 mm

        NEMA MG1

        Connection of Stator Winding

        93.0 in

        93.0 mm

        Star

        Locked Rotor Torque

        93.0 in

        93.0 mm

        60%

        No Load Current

        93.0 in

        93.0 mm

        67 Amps

        Locked Rotor Amps

        93.0 in

        93.0 mm

        500% Code E

        Service Factor

        93.0 in

        93.0 mm

        1.15 SF (1.0 VFD)

        Enclosure Type/Method of Cooling

        93.0 in

        93.0 mm

        WP-II

        Duty

        93.0 in

        93.0 mm

        Continuous

        Temperature Rise

        93.0 in

        93.0 mm

        Class B at rated load

        Maximum Ambient Temperature

        104 °F

        40 °C

        Maximum Altitude - Before Derate

        3,000 ft

        1,000 m

        Rated Torque

        6,625 lb/ft

        8,982 N·m

        Full Load Current

        93.0 in

        93.0 mm

        202 Amps

        Insulation

        93.0 in

        93.0 mm

        Class F

      • Bearings

        • Bearing RTDs for temperature monitoring

        • Insulated non-drive end bearings to reduce bearing currents

        • Anti-friction on 1500 hp (optional)

      • Rotors

        • Designed for minimal vibration

        • Dynamic balancing at full operational speed

        • Fabricated copper squirrel cages

        • Oversized, forged, keyless shaft

        • AISI 4140/DIN42CrMo4 shaft

      • Stators

        • Radial air ducts ensure uniform and efficient cooling

        • Vacuum pressure impregnated with specially formulated epoxy resin

        • 2X RTDS per Phase

        • Space heater

        • Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN