THIS IS MY SELECT

Gas Compression Electric Motors

CN3586 Electric Motor for Gas Compression

Type of EX-Protection

93.0 hp

Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)

Mounting Designation

93.0 hp

F1 or F2

Voltage/Frequency

93.0 hp

4000V & 4160V ± 10%/60 Hz

THIS IS MY SELECT

backhoe loader

CN3586 Electric Motor for Gas Compression

Type of EX-Protection

93.0 hp

Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)

Mounting Designation

93.0 hp

F1 or F2

Voltage/Frequency

93.0 hp

4000V & 4160V ± 10%/60 Hz

Specifications

Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.

      • Type of EX-Protection

        93.0 in

        93.0 mm

        Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)

        Mounting Designation

        93.0 in

        93.0 mm

        F1 or F2

        Voltage/Frequency

        93.0 in

        93.0 mm

        4000V & 4160V ± 10%/60 Hz

        Full Load Speed

        93.0 in

        93.0 mm

        894 rpm

        Electric Motor Type

        93.0 in

        93.0 mm

        Squirrel Cage Induction Motor

        Number of Poles

        93.0 in

        93.0 mm

        8

        Maximum Ambient Temperature

        104 °F

        40 °C

        Full Load Current

        93.0 in

        93.0 mm

        458 Amps

        Shaft

        8.5 in

        216 mm

        Rated Torque

        20,555 lb/ft

        27,869 N·m

        Maximum Altitude - Before Derate

        3,300 ft

        1,000 m

        Locked Rotor Amps

        93.0 in

        93.0 mm

        540% Code E

        Connection of Stator Winding

        93.0 in

        93.0 mm

        Star

        Standards

        93.0 in

        93.0 mm

        NEMA MG1

        Duty

        93.0 in

        93.0 mm

        Continuous

        Enclosure Type/Method of Cooling

        93.0 in

        93.0 mm

        WP-II

        Locked Rotor Torque

        93.0 in

        93.0 mm

        60%

        Service Factor

        93.0 in

        93.0 mm

        1.15 SF (1.0 VFD)

        No Load Current

        93.0 in

        93.0 mm

        137 Amps

        Insulation

        93.0 in

        93.0 mm

        Class F

        Temperature Rise

        93.0 in

        93.0 mm

        Class B at rated load

      • Bearings

        • Bearing RTDs for temperature monitoring

        • Insulated non-drive end bearings to reduce bearing currents

        • Anti-friction on 1500 hp (optional)

      • Rotors

        • Designed for minimal vibration

        • Dynamic balancing at full operational speed

        • Fabricated copper squirrel cages

        • Forged, keyless shaft

        • AISI 4140/DIN42CrMo4 shaft

      • Stators

        • Radial air ducts ensure uniform and efficient cooling

        • Vacuum pressure impregnated with specially formulated epoxy resin

        • 2X RTDS per Phase

        • Space heater

        • Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN