THIS IS MY SELECT
Land Electric-Drive Modules
3512C (HD) Land Electric-Drive Drilling Module
Minimum Rating
1,245 ekW
Maximum Rating
1,245 ekW
Emissions
93.0 hp
U.S. EPA Nonroad Tier 2
THIS IS MY SELECT
backhoe loader
3512C (HD) Land Electric-Drive Drilling Module
Minimum Rating
1,245 ekW
Maximum Rating
1,245 ekW
Emissions
93.0 hp
U.S. EPA Nonroad Tier 2
Specifications
Oil and gas drilling is a complex task that requires specialized power generation equipment. Cat 3500 power modules are specifically designed for drilling operations of electric AC rigs. They combine decades of field experience of the 3500 platform with the latest electronics to ensure highest performance, low emissions, and simplified operator interface. Cat power modules are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3512C (HD) land drilling power modules rating: 1245 ekW (1780 kVA) @ 60 Hz (1200 rpm). Meets U.S. EPA Tier 2 equivalent emission standards. Available using U.S. EPA Flexibility and for other regulated and non-regulated areas.
-
Minimum Rating
1,245 ekW
1,245 ekW
Maximum Rating
1,245 ekW
1,245 ekW
Emissions
93.0 in
93.0 mm
U.S. EPA Nonroad Tier 2
Bore
6.69 in
170 mm
Oil Change Interval
500 h
500 h
Weight
29,500 lb
13,381 kg
Generator
93.0 in
93.0 mm
SR4B
Aspiration
93.0 in
93.0 mm
Turbocharged-Aftercooled
Displacement
3,574 in³
59 l
Stroke
8.5 in
215 mm
Generator Set Control
93.0 in
93.0 mm
EMCP 4.3
Fuel System
93.0 in
93.0 mm
EUI
Voltage
93.0 in
93.0 mm
600
Engine Control and Protection
93.0 in
93.0 mm
ADEM A3
-
Length
310.2 in
7,880 mm
Width
93.9 in
2,384 mm
-
Lube Oil System - Refill
84 gal (US)
318 l
Cooling System - Engine
41 gal (US)
157 l
-
Air Inlet System
-
Corrosion-resistant aftercooler core
-
Air Inlet shutoff
-
Regular duty air cleaner
-
-
Control System
-
ADEM A3 ECU, left-hand mounted
-
Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls or
-
Cat Digital Voltage Regulator (DVR), includes reactive droop capability, 3-phase voltage sensing, kVAR/PF modes, RFI suppression, min/max exciter limiter and exciter diode monitor, space heater and jacket water heater connection and controls, temperature monitoring for 6 stator RTDs and 2 bearing RTDs via J1939
-
-
Cooling System
-
Separate-circuit aftercooled
-
Outlet controlled jacket water thermostat
-
Jacket water pump - gear driven
-
Dual outlet
-
Aftercooler water pump - gear driven
-
Aftercooler water thermostat
-
-
Exhaust System
-
Dry exhaust manifold
-
Dual turbochargers, water cooled bearings
-
Exhaust adapter, 297 mm I.D. to 340 mm I.D. (11.7 in to 13.4 in)
-
Weldable flange, 360 mm I.D. (14.2 in)
-
-
Flywheel and Housing
-
SAE No. 00 flywheel
-
SAE No. 00 flywheel housing
-
SAE standard rotation
-
-
Fuel System
-
Fuel filter simplex (LH) with priming pump (LH)
-
Fuel transfer pump
-
Fuel return line with flexible connection
-
Electronic unit injectors
-
Fuel priming pump
-
-
Instrumentation
-
Emergency stop button
-
Analog gauges:
-
Service port connector
-
Customer connection terminal blocks
-
-
EMCP 4.3 Control Panel
-
140 mm (5.5 in) Graphical Display
-
Communication
-
Controls
-
Generator Set Protection
-
Outputs
-
Inputs
-
Other Features
-
-
Lubrication System
-
Crankcase breather
-
Oil cooler
-
Shallow oil pan
-
Oil drain extension, 2 in NPT female connection
-
Simplex oil filter
-
-
Mounting System
-
4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide
-
Viscous damper drive line coupler
-
-
Power take-offs
-
Accessory drive
-
Lower LH front (available for PTO usage)
-
Front housing, two-sided
-
-
Protection System
-
Starting System
-
TDI air starting motor, RH - 1034 kPa (150 psi)
-
LH control air silencer
-
-
General
-
Paint - Cat yellow
-
Vibration damper and guard
-
Lifting eyes
-
Lift and cable two provisions
-
-
Air Inlet System
-
Heavy duty air cleaner
-
Remote air inlet adapter - rectangular
-
Remote air inlet adapter - round
-
-
Control System
-
Load sharing governor, 2301A
-
Load sharing module
-
Governor conversion to 0-200 mA direct rack control
-
-
Cooling System
-
Radiator options:
-
Coolant level sensor
-
Coolant conditioner
-
-
Exhaust System
-
Exhaust flexible fitting, 318 I.D. mm (12.5 in)
-
Elbow, 305 mm (12 in)
-
Muffler 305 mm (12 in), non spark arresting
-
Muffler, 356 mm (14 in), spark arresting, includes companion flanges, clean-out box, and spark box
-
Muffler, 305 mm (12 in), spark arresting, includes companion flanges, clean-out box, and spark box
-
-
Fuel System
-
Custom fuel filter
-
Primary fuel filter
-
Primary fuel filter with water separator
-
-
Generator Attachments
-
Barrel-mounted petroleum terminal box with air filter and pressure differential switch
-
Barrel-mounted petroleum terminal box
-
Current droop transformer
-
Cable access box
-
Low voltage extension box
-
Current sensing transformers (3)
-
Bearing temperature detectors
-
-
Instrumentation
-
Communications module PL1000T
-
Communications module PL1000E
-
Thermocouples installed, one per cylinder
-
-
Lubrication System
-
RH installed centrifugal oil filter
-
Crankcase fumes disposal
-
Oil level regulator
-
-
Mounting System
-
7.62 m (25 ft) outer base
-
9.14 m (30 ft) outer base
-
12.19 m (40 ft) outer base
-
Package isolator supports (3), for mounting inner base to customer-supplied base
-
Custom base
-
-
Power Take-off
-
Alternator, 24V, 60A
-
Crankshaft pulley
-
-
Protection System
-
Explosion relief valves (3)
-
Metal particle detector switch
-
Metal particle detector with annunciator
-
-
Starting System
-
Custom starting motor
-
Air pressure regulator
-
-
General
-
LH installed engine barring group
-
Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
-
Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
-
Jacket water heater lines
-
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance