THIS IS MY SELECT

Land Mechanical Engines

3512C (HD) Land Mechanical Drilling Engine

Maximum Rating

1,475 BHP

Emissions

93.0 hp

U.S. EPA Non-road Tier 2

Displacement

3,574 in³

THIS IS MY SELECT

backhoe loader

3512C (HD) Land Mechanical Drilling Engine

Maximum Rating

1,475 BHP

Emissions

93.0 hp

U.S. EPA Non-road Tier 2

Displacement

3,574 in³

Specifications

Cat 3512C (HD) engines set the standard in the drilling industry. For many years the 3500 has been the preferred choice by drillers due to their high performance, durability, and reliability in the oilfield while maintaining low emissions.The ideal application for the 3512C (HD) engine is mechanical drive for land drilling rigs.3512C (HD) engines, with ratings: 932-1100 bkW (1250-1475 bhp) @ 1200 rpm meet U.S. EPA Non-road Tier 2 equivalent and CARB Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

      • Maximum Rating

        1,475 BHP

        1,100 bkW

        Emissions

        93.0 in

        93.0 mm

        U.S. EPA Non-road Tier 2

        Displacement

        3,574 in³

        59 l

        Minimum Rating

        1,250 BHP

        932 bkW

        Bore

        6.69 in

        170 mm

        Stroke

        8.46 in

        215 mm

        Rated Speed

        1,200 r/min

        1,200 r/min

        Aspiration

        93.0 in

        93.0 mm

        Turbocharged-Aftercooled

        Governor and Protection

        93.0 in

        93.0 mm

        ADEM A3

        Engine Weight - Net Dry

        11,945 lb

        5,423 kg

        Rotation from Flywheel End

        93.0 in

        93.0 mm

        Counterclockwise

        Oil Change Interval

        93.0 in

        93.0 mm

        500

        Flywheel and Flywheel Housing

        93.0 in

        93.0 mm

        SAE No. 00

        Flywheel Teeth

        93.0 in

        93.0 mm

        183

      • Minimum Cooling System - Engine Only

        41 gal (US)

        157 l

      • Length

        105.6 in

        2,682 mm

        Width

        70.5 in

        1,791 mm

        Height

        79.5 in

        2,019 mm

      • Air Inlet System

        • Separate circuit aftercooler core — corrosion resistant coated (airside), air cleaner (single element w/service indicator)

        • Dual rear-mounted turbochargers

      • Control System

        • ADEM A3 ECU — LH

        • Electronic fuel injector fuel system (10 amp DC power required todrive electronic engine control unit)

      • Cooling System

        • Torque converter connections

        • Thermostats and housing, jacket water pump, gear-drivencentrifugal

        • Connections for radiator cooling

        • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections

        • Separate Circuit Aftercooler (SCAC)

      • Exhaust System

        • Exhaust manifold — dry, stainless steel bellows

        • Dual turbochargers with watercooled bearings

        • Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP,376 mm bolt hole dia.

      • Flywheels and Flywheel Housing

        • Flywheel, SAE No. 0 — 151 teeth

        • Flywheel housing — SAE No. 0

      • Fuel System

        • Primary fuel filter

        • Fuel priming pump

        • Fuel filter — RH spin-on type

        • Fuel transfer pump

        • Electronically controlled unit injectors

      • Instrumentation

        • Electronic instrument panel

        • Instrumentation readouts:

      • Lube System

        • Crankcase breather — top-mounted

        • Oil cooler

        • Oil filler and dipstick — RH

        • Oil pump

        • Oil filter — RH spin-on type

        • Rear sump oil pan, 250-hour change interval

        • Oil pan drain valve — 3/4' NPT female connection

      • Mounting System

      • Power Take-Offs

      • Protection System

        • ADEM A3 ECU system to provide customer-programmableengine deration strategies to protect against adverse operatingconditions

        • Emergency stop logic inputs provided at 40-pin customer interfaceconnection

        • Air inlet shutoff

      • Starting System

        • Air starting motor — RH, 620 to 1034 kPa (90 to 150 psi)

        • Air silencer

      • General

        • Paint — Cat yellow

        • Vibration damper and guard

        • Lifting eyes

        • B-Series LAND

      • Air Inlet System

        • Air cleaner and air cleaner mounting

        • Remote air inlet adapters

        • Air inlet heater

      • Charging System

        • Battery chargers

        • Charging alternators

      • Control System

        • Local speed throttle control

        • Throttle position sensors

        • Load sharing modules

        • Governor conversion

      • Cooling System

        • High gloss black folded core radiators

        • Coolant regulator conversion

        • Belt guard and radiator guard

        • Blower fan

        • Radiator cover

        • Fan drive and fan pulleys

        • Water level switch gauge

        • Coolant level sensors

        • Coolant conditioner

        • Expansion tank

        • Heat exchanger cooling conversion

        • Auxiliary water pump

        • Air separator

      • Exhaust System

        • Flexible exhaust fitting

        • Elbows and flange

        • Flange and exhaust adapters

        • Manifold and mufflers

      • Fuel Systems

        • Flexible fuel lines

        • Fuel cooler

        • Water/fuel separator

        • Fuel level switch

      • Instrumentation

        • Customer management device

        • Remote panel display and remote cylinder temperature display

        • Switches and contactors

        • Gauges and instrument panels

      • Lube System

        • Fumes disposal

        • Oil pans

        • Prelube options

        • Sump pumps

        • Oil Filters

      • Mounting System

      • Power Take-Offs

        • Front housing

        • Flexible couplings

        • Coupling hub

        • Front accessory drives

        • Auxiliary drive shaft

        • Auxiliary drive pulleys

        • Front stub shaft

        • Damper guard removal

        • Pulleys

        • Flywheel stub shaft

      • Protection System

        • Shutoffs

        • Switches and contractors

        • Explosion relief valve

        • Sensors

        • Oil pressure monitor

        • Shutoff controls

        • Corrosion protection

      • Starting System

        • Air starting motors — electric

        • Air pressure regulator

        • Air silencer

        • Air start controls — manual, electric

        • Redundant start

        • Starting aids

        • Battery sets – 24V

        • Battery cable and battery rack

      Similar Models

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN