THIS IS MY SELECT

Offshore Generator Sets

3516C (HD) CI/D2 Hazardous Location

Minimum Rating

2,625 kV·A

Maximum Rating

2,625 kV·A

Emissions

93.0 hp

EPA Tier 2, IMO Tier II

THIS IS MY SELECT

backhoe loader

3516C (HD) CI/D2 Hazardous Location

Minimum Rating

2,625 kV·A

Maximum Rating

2,625 kV·A

Emissions

93.0 hp

EPA Tier 2, IMO Tier II

Specifications

Cat 3500 offshore generator sets are specifically designed for drilling and production operations offshore. Decades of experience powering offshore vessels and platforms make have evolved into a product that offers proven performance, low emissions, high durability, and low owning and operating costs. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat 3516C (HD) offshore generator set. Ratings: 2100 ekW (2963 bhp) @ 60 Hz (1800 rpm).

      • Minimum Rating

        2,625 kV·A

        2,100 ekW

        Maximum Rating

        2,625 kV·A

        2,100 ekW

        Emissions

        93.0 in

        93.0 mm

        EPA Tier 2, IMO Tier II

        Engine Control

        93.0 in

        93.0 mm

        ADEM A4

        Bore

        6.7 in

        170 mm

        Weight

        38,581 lb

        17,500 kg

        Displacement

        4,760 in³

        78 l

        Fuel System

        93.0 in

        93.0 mm

        EUI

        Stroke

        8.5 in

        215 mm

        Aspiration

        93.0 in

        93.0 mm

        Dual Turbocharged-Aftercooled

      • Length

        264 in

        6,705 mm

        Height

        100 in

        2,535 mm

        Width

        78 in

        1,986 mm

      • Lube Oil System - Refill

        107 gal (US)

        405 l

        Cooling System - Engine

        62 gal (US)

        234.7 l

      • AIR INLET SYSTEM

        • Aftercooler core, corrosion resistant (air side)

        • Air cleaner, regular duty with service indicators

        • Dual turbochargers, rear mounted

      • CONTROL SYSTEM

        • Dual Caterpillar A4 electronic engine control with electronic unit injector fuel system and rigid wiring harness.

        • 24 VDC (less than 10A) to be provided by customer at Power Distribution Panel to power engine electrical system.

      • COOLING SYSTEM

        • Jacket water (JW) engine cooling and two-stage jacket water/separate circuit (SCAC) charge air cooling

        • To ensure compliance in use, radiators or heat exchangers must be capable of rejecting sufficient heat to allow proper engine operation at worst site conditions.

        • The radiator or heat exchanger must supply 48C (118 F)

        • SCAC cooling water to the aftercooler inlet of at least 200 gal/min at ambient temperature of 30C and at site conditions (including altitude considerations)

      • EXHAUST SYSTEM

        • Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields.

        • Exhaust outlet: 305 mm (12 in) round flanged outlet, vertical orientation

      • FLYWHEELS & FLYWHEEL HOUSINGS

        • Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00

        • Flywheel housing, SAE No. 00

        • SAE standard rotation

      • FUEL SYSTEM

        • Duplex Fuel filter, LH service. Simplex fuel filter, RH service

        • Fuel transfer pump

        • Fuel priming pump, RH

        • Electronically Controlled Unit Injectors

        • Customer connection located at lower right front of engine

        • SOLAS shielding

      • INSTRUMENTATION

      • LUBE SYSTEM

      • MOUNTING SYSTEM

      • ELECTRICAL SYSTEM

        • MCS certified Class I / Divison 2

        • Low Smoke Zero Halogen Wiring Harness

      • PROTECTION SYSTEM

        • A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions

        • Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection

      • HAZARDOUS LOCATION

        • Only electrical system is hazardous environment certified

        • NEC 500 Class I Division 2 for gas groups C and D

        • Temperature class is T3 for ambient temperatures from -10 C to 50 C

        • Class I/ Division 2 CMPD

      • GENERATOR AND GENERATOR ATTACHMENTS

        • Class I / Division 2 designed to customer's specifications

        • Insulation for harsh environment protection

      Similar Models

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN