THIS IS MY SELECT
Offshore Generator Sets
6CM32E
Minimum Rating
3,630 kV·A
Maximum Rating
3,630 kV·A
Emissions
93.0 hp
IMO Tier II
THIS IS MY SELECT
backhoe loader
6CM32E
Minimum Rating
3,630 kV·A
Maximum Rating
3,630 kV·A
Emissions
93.0 hp
IMO Tier II
Specifications
6CM32E Land Production Generator Set
-
Minimum Rating
3,630 kV·A
2,910 ekW
Maximum Rating
3,630 kV·A
2,910 ekW
Emissions
93.0 in
93.0 mm
IMO Tier II
Engine Control
93.0 in
93.0 mm
Electronic
Bore
12.6 in
320 mm
Stroke
18.9 in
480 mm
Weight
163,934 lb
73,000 kg
Displacement
14,133 in³
232 l
Generator Set Control
93.0 in
93.0 mm
Electronic
Aspiration
93.0 in
93.0 mm
Turbocharged-Aftercooled
-
Height
207.7 in
5,275 mm
Length
266.22 in
9,302 mm
Width
103.9 in
2,639 mm
-
Engine
-
Motor-driven barring gear, fitted on engine
-
Reversing contractor and push button switch with cable
-
Electronic speed setting equipment with actuator and speed pick-up
-
Emergency shutdown equipment with pushbutton, separate, for manual emergency stop
-
-
Engine Indicators
-
Gauge board with set liquid damped pressure gauges for: fuel, lubricating oil, fresh water, starting air, and charge air.
-
On-engine thermometers for fuel, lubricating oil, fresh water, and charge air
-
Electric remote speed indicator
-
Turbocharger and remote speed indicator
-
Exhaust gas temperature indicator
-
-
Control
-
Manual control on engine, including: control panel with start /stop key, speed setting device, mechanical shutdown device, change over of control functions from engine to remote control
-
Starting solenoid valve on engine, 24 V DC
-
Separate electronic speed governor
-
-
Monitoring for Unattended Operation
-
Pressure switches, mounted on engine, for:
-
Switches for:
-
Control Cabinet with housings for wall mounting, including:
-
-
Starting Air System
-
Air Intake System
-
Air intake filter, fitted on the turbocharger
-
Air bottles, separate
-
-
Fuel System
-
Separate circulating pump driven by electric motor, horizontal or vertical
-
Duplex filter with differential pressure indication
-
-
Exhaust System
-
Turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device
-
Expansion joint separate
-
Separate silencer and spark arrester, unlagged 35 dB(A)
-
-
Fresh Cooling Water System
-
HT pump, fitted on engine
-
LT pump, separate, vertical design, electric motor driven
-
HT thermostat, not powered and separate
-
Engine preheating equipment, fitted on base frame
-
-
Lubricating Oil System
-
Plate cooler, fitted on engine
-
Force pump, fitted on engine
-
Prelubrication pump, fitted on base frame, electric motor driven
-
Boll and Kirch automatic backflushing filter, separate
-
Duplex filter with differential pressure indication, separate
-
Pressure control valve, separate
-
Thermostat, not powered, separate
-
-
Connecting Parts - Engine
-
Set of connecting parts between flange coupling and flywheel
-
Flexible flange coupling between engine and generator
-
Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator
-
Mounting of engine and generator on the base frame
-
Set of bonded rubber rails for resilient mounting of the base frame
-
Set of flexible pipe connections
-
-
Tools
-
Set of tools for the engine including hydraulic tightening tools and nozzle tester
-
Set of tools for turbocharger
-
Inside micrometer for cylinder liners
-
Ruler for cylinder liner
-
-
Spare Parts
-
Set of engine spare parts for unrestricted operation
-
Set of spare flexible pipe connections
-
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance