THIS IS MY SELECT

Offshore Generator Sets

8CM25C

Minimum Rating

3,200 kV·A

Maximum Rating

3,200 kV·A

Emissions

93.0 hp

IMO Tier II

THIS IS MY SELECT

backhoe loader

8CM25C

Minimum Rating

3,200 kV·A

Maximum Rating

3,200 kV·A

Emissions

93.0 hp

IMO Tier II

Specifications

The 8CM25C generator set brings to the offshore industry a legacy of proven reliability and durability in the marine industry. CM offshore generator sets feature standard modular designs, engine-mounted pumps and filters, and a full range of factory attachments that make their installation simple and efficient. Ideal applications for the 8CM25C offshore generator sets are main power on-board production vessels and platforms. Complete package offerings are MCS type-approved and compliant with IMO Tier II emissions standards, making their integration into vessels and platforms a simplified operation. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.

      • Minimum Rating

        3,200 kV·A

        2,560 ekW

        Maximum Rating

        3,200 kV·A

        2,560 ekW

        Emissions

        93.0 in

        93.0 mm

        IMO Tier II

        Stroke

        15.7 in

        400 mm

        Engine Control

        93.0 in

        93.0 mm

        Electronic

        Displacement

        9,959 in³

        163 l

        Weight

        116,845 lb

        53,000 kg

        Aspiration

        93.0 in

        93.0 mm

        Turbocharged-Aftercooled

        Generator Set Control

        93.0 in

        93.0 mm

        Electronic

        Bore

        10 in

        255 mm

      • Length

        359.4 in

        9,130 mm

        Height

        174.7 in

        4,437 mm

        Width

        99.8 in

        2,534 mm

      • Engine Indicators

        • Gauge board with set liquid damped pressure gauges for: fuel, lubricating oil, fresh water, starting air, and charge air.

        • On-engine thermometers for fuel, lubricating oil, fresh water, and charge air

        • Electric remote speed indicator

        • Turbocharger and remote speed indicator

        • Exhaust gas temperature indicator

      • Engine

        • Motor-driven barring gear, fitted on engine

        • Reversing contractor and pushbutton switch with cable

        • Electronic speed setting equipment with actuator and speed pick-up

        • Emergency shutdown equipment with pushbutton, separate, for manual emergency stop

      • Control

        • Manual control on engine, including: control panel with start /stop key, speed setting device, mechanical shutdown device, change over of control functions from engine to remote control

        • Starting solenoid valve on engine, 24 V DC

        • Separate electronic speed governor

      • Monitoring for Unattended Operation

      • Starting Air System

      • Air Intake System

        • Air intake filter, fitted on the turbocharger

        • Air bottles, separate

      • Diesel Oil System

        • Separate circulating pump driven by electric motor, horizontal or vertical

        • Duplex filter with differential pressure indication

      • Exhaust System

        • Turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device

        • Expansion joint separate

        • Separate silencer and spark arrester, unlagged 35 dB(A)

      • Fresh Cooling Water System

        • HT pump, fitted on engine

        • LT pump, separate, vertical design, electric motor driven

        • HT thermostat, not powered and separate

        • Engine preheating equipment, fitted on base frame

      • Lubricating Oil System

        • Plate cooler, fitted on engine

        • Force pump, fitted on engine

        • Prelubrication pump, fitted on base frame, electric motor driven

        • Boll and Kirch automatic backflushing filter, separate

        • Duplex filter with differential pressure indication, separate

        • Pressure control valve, separate

        • Thermostat, not powered, separate

      • Connecting Parts- Engine

        • Set of connecting parts between flange coupling and flywheel

        • Flexible flange coupling between engine and generator

        • Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator

        • Mounting of engine and generator on the base frame

        • Set of bonded rubber rails for resilient mounting of the base frame

        • Set of flexible pipe connections

      • Tools

        • Set of tools for the engine including hydraulic tightening tools and nozzle tester

        • Set of tools for turbocharger

        • Inside micrometer for cylinder liners

        • Ruler for cylinder liner

      • Spare Parts

        • Set of engine spare parts for unrestricted operation

        • Set of spare flexible pipe connections

      Similar Models

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN