THIS IS MY SELECT

Well Service Engines

3516C (HD) Well Stimulation Engine

Minimum Rating

3,000 BHP

Maximum Rating

3,300 BHP

Emissions

93.0 hp

EPA Non-Road Tier 2, IMO II and China Stage III

THIS IS MY SELECT

backhoe loader

3516C (HD) Well Stimulation Engine

Minimum Rating

3,000 BHP

Maximum Rating

3,300 BHP

Emissions

93.0 hp

EPA Non-Road Tier 2, IMO II and China Stage III

Specifications

Well stimulation operations in the oilfield are complex and demanding. The 3516C (HD) engine for well stimulation operations was specifically developed to reach the highest power nodes while meeting the highest standards in durability, reliability, and emissions. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3516C (HD) engines, with ratings: 2237-2461 bkW (3000-3300 bhp) @ 1900 rpm meet China Stage III and U.S. Non-road EPA Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

      • Minimum Rating

        3,000 BHP

        2,237 bkW

        Maximum Rating

        3,300 BHP

        2,461 bkW

        Aspiration

        93.0 in

        93.0 mm

        Turbocharged-Aftercooled

        Displacement

        3,173 in³

        52 l

        Flywheel and Flywheel Housing

        93.0 in

        93.0 mm

        SAE No. 0

        Flywheel Teeth

        93.0 in

        93.0 mm

        151

        Stroke

        7.5 in

        190 mm

        Bore

        6.7 in

        170 mm

      • Emissions

        93.0 in

        93.0 mm

        EPA Non-Road Tier 2, IMO II and China Stage III

      • Length

        111.3 in

        2,827 mm

        Width

        70.6 in

        1,793 mm

        Height

        73.3 in

        1,862 mm

        Weight

        10,590 lb

        4,803.6 kg

      • Air Inlet System

        • Separate circuit aftercooler core — corrosion resistant coated (air side), air cleaner (single element w/service indicator)

        • Dual rear-mounted turbochargers

      • Control System

        • ADEM A3 ECU — LH

        • Electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control unit)

      • Cooling System

        • Torque converter connections

        • Thermostats and housing, jacket water pump, gear-driven centrifugal

        • Connections for radiator cooling

        • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections

        • Separate Circuit Aftercooler (SCAC)

      • Exhaust System

        • Exhaust manifold — dry, stainless steel bellows

        • Dual turbochargers with watercooled bearings

        • Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP, 376 mm bolt hole dia.

      • Flywheels and Flywheel Housing

        • Flywheel, SAE No. 0 — 151 teeth

        • Flywheel housing — SAE No. 0

      • Fuel System

        • Primary fuel filter

        • Fuel priming pump

        • Fuel filter — RH spin-on type

        • Fuel transfer pump

        • Electronically controlled unit injectors

      • Instrumentation

        • No standard instrumentation

        • Optional, remote instrumentation available

        • Service meter

      • Lube System

        • Crankcase breather — top-mounted

        • Oil cooler

        • Oil filler and dipstick — RH

        • Oil pump

        • Oil filter — RH spin-on type

        • Rear sump oil pan, 250-hour change interval

        • Oil pan drain valve — 3/4' NPT female connection

      • Mounting System

      • Power Take-Offs

      • Protection System

        • ADEM A3 ECU system to provide customer-programmable engine deration strategies to protect against adverse operating conditions

        • Emergency stop logic inputs provided at 40-pin customer interface connection

        • Air inlet shutoff

      • General

        • Paint — Cat yellow

        • Vibration damper and guard

        • Lifting eyes

        • B-Series LAND

      • Air Inlet System

        • Air cleaner and air cleaner mounting

        • Remote air inlet adapters

        • Air inlet heater

      • Charging System

        • Battery chargers

        • Charging alternators

      • Control System

        • Local speed throttle control

        • Throttle position sensors

        • Load sharing modules

        • Governor conversion

      • Cooling System

        • High gloss black folded core radiators

        • Coolant regulator conversion

        • Belt guard and radiator guard

        • Blower fan

        • Radiator cover

        • Fan drive and fan pulleys

        • Water level switch gauge

        • Coolant level sensors

        • Coolant conditioner

        • Expansion tank

        • Heat exchanger cooling conversion

        • Auxiliary water pump

        • Air separator

      • Emissions Certifications

      • Exhaust System

        • Flexible exhaust fitting

        • Elbows and flange

        • Flange and exhaust adapters

        • Manifold and mufflers

      • Fuel Systems

        • Flexible fuel lines

        • Fuel cooler

        • Water/fuel separator

        • Fuel level switch

      • Instrumentation

        • Customer management device

        • Remote panel display and remote cylinder temperature display

        • Switches and contactors

        • Gauges and instrument panels

      • Lube System

        • Fumes disposal

        • Oil pans

        • Prelube options

        • Sump pumps

        • Oil Filters

      • Mounting System

        • Base remova

        • Vibration isolators

        • Rails

      • Power Take-Offs

        • Front housing

        • Flexible couplings

        • Coupling hub

        • Front accessory drives

        • Auxiliary drive shaft

        • Auxiliary drive pulleys

        • Front stub shaft

        • Damper guard removal

        • Pulleys

        • Flywheel stub shaft

      • Marine Society Requirements

        • Marine society conversion

        • Spray shielding

      • Protection System

        • Shutoffs

        • Switches and contractors

        • Explosion relief valve

        • Sensors

        • Oil pressure monitor

        • Shutoff controls

        • Corrosion protection

      • Starting System

        • Air starting motors — electric

        • Air pressure regulator

        • Air silencer

        • Hydraulic starter

        • Air start controls — manual, electric

        • Redundant start

        • Starting aids

        • Battery sets - 24V

        • Battery cable and battery rack

      Similar Models

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN