THIS IS MY SELECT
Well Service Engines
C13 ACERT™ Dry Manifold Petroleum Engine
Minimum Rating
385 BHP
Maximum Rating
520 BHP
Emissions
93.0 hp
EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
THIS IS MY SELECT
backhoe loader
C13 ACERT™ Dry Manifold Petroleum Engine
Minimum Rating
385 BHP
Maximum Rating
520 BHP
Emissions
93.0 hp
EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Specifications
Cat C13 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C13 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C13 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C13 ACERT™ Industrial Diesel Engine. Ratings: 287-388 bkW (385-520 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent or EU Stage II equivalent emission standards.
-
Minimum Rating
385 BHP
287 bkW
Maximum Rating
520 BHP
387 bkW
Governor and Protection
93.0 in
93.0 mm
Electronic (ADEM™ A3)
RPM
2,100 r/min
2,100 r/min
Aspiration
93.0 in
93.0 mm
Turbocharged-Aftercooled
Displacement
760 in³
12.5 l
Flywheel and Flywheel Housing
93.0 in
93.0 mm
SAE 1
Flywheel Teeth
93.0 in
93.0 mm
113
Rotation from Flywheel End
93.0 in
93.0 mm
Counterclockwise
Stroke
6.2 in
157 mm
Bore
5.1 in
130 mm
-
Emissions
93.0 in
93.0 mm
EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
-
Length
47.3 in
1,201 mm
Width
39.9 in
1,013 mm
Height
46.7 in
1,186 mm
Weight
1,976 lb
896 kg
-
Lube Oil System - Refill
9 gal (US)
34 l
Cooling System
3.8 gal (US)
14.4 l
-
Air Inlet System
-
Turbocharger, mid-mounted
-
Air inlet elbow 90°, 104.5 mm (4.11' OD) hose connection
-
-
Control System
-
Electronic governing, PTO speed control
-
Programmable ratings
-
Cold mode start strategy
-
Automatic altitude compensation
-
Power compensation for fuel temperature
-
Programmable low and high idle and TEL
-
Electronic diagnostics and fault logging
-
Engine monitoring system — speed, temperature, pressure
-
J1939 Broadcast — diagnostic and engine status
-
-
Cooling System
-
Thermostats and housing
-
Jacket water pump — gear-driven
-
Front water pump inlet
-
-
Exhaust System
-
Exhaust manifold — dry
-
Front turbo exhaust
-
-
Flywheels and Flywheel Housings
-
Fuel System
-
Electronic unit injector
-
Fuel filter — secondary, mid-mount, (LH 2 micron high performance)
-
Fuel transfer pump — front
-
Fuel priming pump — LH mid-mount
-
Fuel fitting — fuel return connection: straight No. 8, 5/8-18
-
-
Lube System
-
Crankcase breather
-
Oil cooler
-
Oil filter — RH
-
Oil pan — front sump, 40 L capacity
-
Oil filler — LH front
-
Oil dipstick — LH front
-
Oil pump
-
Oil valve sampling — RH rear engine side
-
-
Power Take-Offs
-
Crankshaft pulley and damper — 250 mm (9.84 in), 2 grooves 22.3 mm (.87 in) width
-
Hydraulic pump drive — SAE A, 11-tooth
-
1.41:1 drive ratio — counterclockwise rotation (45 lb-ft capacity)
-
-
General
-
Vibration damper
-
Paint — Cat yellow
-
Lifting eyes
-
Automatic variable timing, electronic
-
Electronic installation kit (connectors, pins, sockets)
-
Literature
-
-
Mandatory Options
-
Flywheel housing or rear PTO
-
Throttle position sensor
-
Primary filter/water separator
-
-
Air Compressor
-
Air compressors
-
Air chambers
-
Air compressor governors
-
-
Air Inlet System
-
Air cleaners
-
Precleaners
-
Air lines
-
Air inlet gasket
-
-
Belt-Driven Accessories
-
Charging System
-
Charging alternators
-
Alternator mountings
-
Alternator guard
-
Alternator accessories
-
-
Control System
-
Cooling System
-
Radiator — installed
-
Fan drive f/u/w Caterpillar installed radiator
-
Fan drive pulleys f/u/w customer-supplied radiators
-
Coolant conditioner
-
Water lines — pump inlet
-
Fan drive mountings
-
Fan height instructions
-
Fan adapters for suction fans and blower fans
-
Suction fans and blower fans
-
Coolant level sensor
-
Aftercooler lines
-
-
Exhaust System
-
Muffler
-
Flexible fitting
-
Elbows, flange, pipe, clamp
-
Straight exhaust adapter
-
-
Fuel System
-
Fuel lines for fuel filter
-
Fuel cooler
-
Fuel fitting — fuel return connection
-
Flexible fuel lines
-
-
Instrumentation
-
Gauges and instrument panels
-
Voltmeters
-
Gauge mounting
-
Ammeter
-
-
Lube System
-
Oil pan
-
Oil pan drain
-
Oil level gauges
-
Oil filter — bypass and remote
-
Lubricating oil
-
Oil filler
-
Fumes disposal
-
-
Mounting System
-
Front and rear engine supports
-
Structural steel base
-
-
Power Take-Offs
-
Crankshaft pulleys
-
Crankshaft pulley — stack-on
-
Output flange
-
Flywheel stub shaft
-
Front stub shaft
-
Hydraulic pump drive
-
Hydraulic pumps — front and rear
-
Enclosed clutch
-
Clutch support
-
-
Protection System
-
Air shutoff
-
Air shutoff switch
-
-
Starting System
-
Starting System
-
Starting aids
-
Battery sets — 24 Volt, dry
-
Battery cable
-
Battery rack
-
-
Transmission Arrangement
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance