THIS IS MY SELECT
Well Service Engines
C9 ACERT™ Hazardous Location Engine
Minimum Rating
340 BHP
Maximum Rating
340 BHP
Emissions
93.0 hp
EPA and CARB Non-Road Tier 3, EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
THIS IS MY SELECT
backhoe loader
C9 ACERT™ Hazardous Location Engine
Minimum Rating
340 BHP
Maximum Rating
340 BHP
Emissions
93.0 hp
EPA and CARB Non-Road Tier 3, EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
Specifications
Cat C9 ACERT hazardous location engines are the ideal solution for specialized and demanding operations in the oilfield. Engines are hazardous-location certified from the factory to minimize installation design, time, and cost. Decades of field operation and intense research and development allow Cat C9 ACERT hazardous location engines to deliver excellent performance with low operating costs and emissions.Hazardous location engines are certified to operate in potentially explosive environments. Applications powered by C9 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.C9 ACERT hazardous location engines, with ratings 254 bkW (340 bhp) @ 2200 rpm meet IMO Tier II, EPA Non-road Tier 3 equivalent and EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.
-
Minimum Rating
340 BHP
254 bkW
Maximum Rating
340 BHP
254 bkW
Governor and Protection
93.0 in
93.0 mm
Electronic (ADEM™ A4)
RPM
2,200 r/min
2,200 r/min
Aspiration
93.0 in
93.0 mm
Turbocharged-Aftercooled
Displacement
537.96 in³
8.82 l
Flywheel and Flywheel Housing
93.0 in
93.0 mm
SAE 1 or 2
Flywheel Teeth
93.0 in
93.0 mm
113 (SAE 1), 134 (SAE 2)
Rotation from Flywheel End
93.0 in
93.0 mm
Counterclockwise
Stroke
5.9 in
149 mm
Bore
4.4 in
112 mm
-
Emissions
93.0 in
93.0 mm
EPA and CARB Non-Road Tier 3, EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
-
Length
44.4 in
1,128 mm
Width
35.1 in
892 mm
Height
42.6 in
1,082 mm
Weight
2,219 lb
1,007 kg
-
Lube Oil System - Refill
8 gal (US)
30.3 l
Cooling System
3.7 gal (US)
13.9 l
-
Air Inlet System
-
Turbocharger, separate circuit (SCAC) or remote (REMAC) aftercooler
-
Single, right-side, center-mounted turbo with water-cooled turbine housing
-
Air inlet 101.6 mm (4 in) connection type
-
-
Control System
-
Electronic governing, PTO speed control
-
Programmable ratings
-
Cold mode start strategy
-
Automatic altitude compensation
-
Fuel cooled ECU
-
Power compensation for fuel temperature
-
Programmable low and high idle
-
Electronic diagnostics and fault logging
-
Programmable monitoring system (engine speed, temperature, pressure)
-
J1939 broadcast (diagnostic and engine status)
-
Certified electrical control system (hazardous environment only)
-
Derated engine: automatic ambient temperature compensation
-
-
Cooling System
-
Thermostats and housing, RH forward-facing outlet — 51 mm (2.01 in) connection
-
Jacket water pump — belt-driven, centrifugal
-
Water pump — inlet RH facing downward 63 mm (2.48 in)
-
-
Exhaust System
-
Exhaust manifold — wet
-
Single, right-side, center-mounted turbo with water-cooled turbine housing
-
Rear facing turbo exhaust 81.8 mm (3.22 in.) connection, non V-band clamp
-
-
Flywheels and Flywheel Housing
-
Fuel System
-
HEUI fuel system
-
Fuel filter — secondary, LH (2-micron high performance)
-
Fuel transfer pump — left front
-
Fuel priming pump — left front
-
-
Lube System
-
Crankcase breather — LH
-
Crankcase fumes disposal — with integrated service indicator, LH
-
Oil cooler — RH
-
Oil filter — RH
-
Oil pan — front sump
-
Oil filler — top mounted
-
Oil level gauge — LH side
-
Oil pump — gear-driven
-
Oil valve sampling
-
Preservation of turbocharger, flywheel, and crankcase
-
-
Power Take-Offs
-
General
-
Vibration damper
-
Lifting eyes
-
Automatic variable timing — electronic
-
Literature
-
-
Mandatory Options
-
Flywheel housing and flywheel
-
Primary filter/water separator
-
Turbo orientation
-
-
Air Inlet System
-
Air inlet elbow
-
Air shutoffs
-
-
Cooling System
-
Water outlet elbow
-
Coolant conditioner
-
-
Flywheels and Flywheel Housing
-
Instrumentation
-
Gauges and instrument panels
-
Interconnect harness
-
-
Lube System
-
Oil pans
-
Drain and cover
-
Remote oil filters
-
Lubricating oils
-
-
Mounting System
-
Structural steel base
-
Engine support — front and rear
-
-
Power Take-Offs
-
Rear enclosed clutches
-
Hydraulic pump drives
-
Hydraulic gear pumps
-
Clutch supports
-
Crankshaft pulleys
-
Transmission Arrangement
-
General
-
Similar Models
WHY CHOOSE EMPIRE
-
In-house, local project teams for design, engineering and management
-
Every purchase backed by a full menu of service and support offerings
-
Flexible financing options designed to fit your budget
-
Commitment to providing expert training to maximize operations
-
Value Agreements to ensure proper maintenance and performance