THIS IS MY SELECT

Well Service Engines

C9 ACERT™ Water Cooled Manifold Engine

Minimum Rating

325 BHP

Maximum Rating

340 BHP

Emissions

93.0 hp

EPA and CARB Non-Road Tier 3,EU Stage IIIA, EPA Marine Tier 2, IMO Tier II

THIS IS MY SELECT

backhoe loader

C9 ACERT™ Water Cooled Manifold Engine

Minimum Rating

325 BHP

Maximum Rating

340 BHP

Emissions

93.0 hp

EPA and CARB Non-Road Tier 3,EU Stage IIIA, EPA Marine Tier 2, IMO Tier II

Specifications

Cat C9 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C9 ACERT engines to deliver excellent performance with low operating costs and emissions.Equipment powered by C9 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.C9 ACERT water-cooled manifold engines, with ratings: 242-254 bkW (325-340 bhp) @ 2200 rpm meet IMO Tier II, EPA Non-road Tier 3 equivalent and EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

      • Minimum Rating

        325 BHP

        243 bkW

        Maximum Rating

        340 BHP

        254 bkW

        Governor and Protection

        93.0 in

        93.0 mm

        Electronic (ADEM™ A4)

        Aspiration

        93.0 in

        93.0 mm

        Turbocharged-Aftercooled

        Displacement

        538 in³

        8.8 l

        Flywheel and Flywheel Housing

        93.0 in

        93.0 mm

        SAE 1 or 2

        Flywheel Teeth

        93.0 in

        93.0 mm

        113 (SAE 1), 134 (SAE 2)

        Rotation from Flywheel End

        93.0 in

        93.0 mm

        Counterclockwise

        Stroke

        5.9 in

        149 mm

        Bore

        4.4 in

        112 mm

      • Emissions

        93.0 in

        93.0 mm

        EPA and CARB Non-Road Tier 3,EU Stage IIIA, EPA Marine Tier 2, IMO Tier II

      • Length

        44.4 in

        1,125 mm

        Width

        35.1 in

        892 mm

        Height

        41.4 in

        1,052 mm

        Weight

        1,844 lb

        836 kg

      • Lube Oil System - Refill

        8 gal (US)

        30.3 l

        Cooling System

        3.7 gal (US)

        13.9 l

      • Air Inlet System

        • Turbocharger, separate circuit (SCAC) or remote (REMAC)aftercooler

        • Single, right-side, center-mounted turbo with water-cooledturbine housing

        • Air inlet 101.6 mm (4 in) connection type

      • Control System

        • Electronic governing, PTO speed control

        • Programmable ratings

        • Cold mode start strategy

        • Automatic altitude compensation

        • Fuel cooled ECU

        • Power compensation for fuel temperature

        • Programmable low and high idle

        • Electronic diagnostics and fault logging

        • Programmable monitoring system (engine speed, temperature,pressure)

        • J1939 broadcast (diagnostic and engine status)

        • Certified electrical control system (hazardous environment only)

        • Derated engine: automatic ambient temperature compensation

      • Cooling System

        • Thermostats and housing, RH forward-facing outlet — 51 mm(2.01 in) connection

        • Jacket water pump — belt-driven, centrifugal

        • Water pump — inlet RH facing downward 63 mm (2.48 in)

      • Exhaust System

        • Exhaust manifold — water-cooled

        • Single, right-side, center-mounted turbo with water-cooledturbine housing

        • Rear facing turbo exhaust 81.8 mm (3.22 in) connection, nonV-band clamp

      • Flywheels and Flywheel Housing

      • Fuel System

        • HEUI fuel system

        • Fuel filter — secondary, LH (2-micron high performance)

        • Fuel transfer pump — left front

        • Fuel priming pump — left front

      • Lube System

        • Crankcase breather — LH

        • Crankcase fumes disposal — with integrated service indicator, LH

        • Oil cooler — RH

        • Oil filter — RH

        • Oil pan — front sump

        • Oil filler — top mounted

        • Oil level gauge — LH side

        • Oil pump — gear-driven

        • Oil valve sampling

        • Preservation of turbocharger, flywheel, and crankcase

      • Power Take-Offs

      • General

        • Vibration damper

        • Lifting eyes

        • Automatic variable timing — electronic

        • Literature

      • Mandatory Options

        • Flywheel housing and flywheel

        • Throttle position sensor and/or throttle control

        • (Non-hazardous environment only)

        • Primary filter/water separator

        • Turbo orientation

      • Air Compressors

        • Air compressors

        • Air compressor governor

      • Air Inlet System

        • Air cleaner

        • Precleaner

        • Air inlet elbow

        • Air shutoffs

      • Charging Systems

        • Charging alternators

        • Alternator mounting

        • Alternator belt tensioner

        • Alternator pulleys

        • Alternator guards

      • Cooling System

        • Radiators

        • Fan drive and pulley — f/u/w radiator packages

        • Fans f/u/w radiator packages

        • Coolant level sensor

        • Fan drive mountings

        • Fan adapters

        • Fan adapter for blower fans

        • Fan pulleys

        • Fan height instructions

        • Vee belts for customer-supplied radiators

        • Suction fans and blower fans

        • Water inlet elbows

        • Dry charge coolant conditioners

      • Emissions Certifications

      • Exhaust System

        • Flexible fitting

        • Turbocharger exhaust outlet adapters

        • Elbows, flange, pipes, clamp

        • Rain caps

        • Manifolds

        • Mufflers

      • Flywheels and Flywheel Housing

      • Fuel System

        • Flexible fuel lines

        • Water separator and fuel filters

        • Fuel cooler

      • Instrumentation

        • Gauges and instrument panels

        • Interconnect harness

        • Voltmeters

        • Gauge mounting

        • Ammeter

      • Lube System

        • Oil pans

        • Drain and cover

        • Oil level gauges

        • Remote oil filter

        • Oil fillers

        • Lubricating oil

        • Fumes disposal

      • Mounting System

        • Structural steel base

        • Engine support — front and rear

      • Power Take-Offs

        • Enclosed clutch

        • Clutch supports

        • Flywheel stub shaft

        • Hydraulic pump drives

        • Hydraulic gear pumps

      • Starting System

        • Starting aids

        • Electric starting motors — 12V and 24V

        • Battery sets — 12V and 24V (dry)

        • Battery cable

      • General

      Similar Models

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN