Cat® Pulverizers are perfectly matched to Cat excavators so you can deliver productive concrete demolition without compromising performance or machine health. Cat P200 Series Secondary Pulverizers are designed to reduce the size of debris, clear up a job site, and separate concrete from rebar at ground level after demolition.
Detailed Equipment Specifications
Jaw Width - Moving
15 in
380 mm
Height
62.4 in
1,585 mm
Jaw Depth
35.4 in
899 mm
Capacity - Concrete Thickness
29.5 in
750 mm
Weight
5,467 lb
2,480 kg
Closing Force - Rebar Cutter
326 Sh Ton
331 t
Width
24.6 in
624 mm
Jaw Opening
40.1 in
1,018 mm
Length
103 in
2,615 mm
Closing Force - Tip
171 Sh Ton
174 t
Jaw Width - Fixed
19.7 in
500 mm
Dimensions - Housing + Jaw
Length
107.3 in
2,725 mm
Width
26 in
660 mm
Height
62.4 in
1,585 mm
Dimensions - Jaw
Jaw Depth
33.3 in
845 mm
Cutter Length
7.9 in
200 mm
Jaw Opening - Maximum
46.3 in
1,175 mm
Jaw Width - Fixed
26 in
660 mm
Jaw Width - Moveable
15 in
380 mm
Hydraulic Requirements
Jaw Circuit - Max. Oil Pressure
4,786 psi
33,000 kPa
Jaw Circuit - Max. Oil Flow
74 gpm
280 L/min
Performance
Cycle Time - Open
1.9 s
1.9 s
Cycle Time - Close
1.3 s
1.3 s
Cutting Force - Blade Center
409 Sh Ton
3,640 kN
Crushing Force - Tip
129 Sh Ton
1,145 kN
Crushing Force - Primary Tooth
224 Sh Ton
1,990 kN
Crushing Force - Primary Cutter
409 Sh Ton
3,640 kN
Recommended Carrier Weight
Excavator Minimum
24000 kg (52900 lb)
Excavator Maximum
35000 kg (77200 lb)
Weight
Weight - Housing, Jaw and Bracket
5,952 lb
2,700 kg
HIGH PERFORMANCE
Cat pulverizer jaws are designed to cut through material quickly to enhance your machine’s overall operating efficiency and help reduce fuel consumption.
The oversized cylinder on the non-rotating secondary pulverizer delivers a strong crushing force to reduce concrete and separate rebar.
The Speed Booster valve actively balances speed and power, delivering fast cycle times and strong closing force to help increase productivity.
EASY TO MAINTAIN
Replaceable wear parts can be swapped quickly in the field and do not require surface welding to help reduce service time.
Daily wear parts inspection and grease points are accessible from the ground with the pulverizer still mounted on the machine.
Safely perform maintenance with easy access through one inspection panel.
Hydraulic components are shielded from damage inside the housing, helping decrease downtime on the job site.
RELIABILITY AND DURABILITY
Cat pulverizers are manufactured with high-strength, abrasion-resistant steel, especially in excessive wear areas.
Reinforced cylinder rod hinges on the moveable jaw are designed to help boost durability and life of the pulverizer.
The C-shaped cylinder guard provides extra protection against concrete demolition.
Cat pulverizers have a versatile use across demolition applications, making them your choice for a wide variety of job sites.
BOOST EFFICIENCY AND PRODUCTIVITY WITH INTEGRATED TECHNOLOGIES
Never waste time looking for your attachments again. Cat asset tracking is available on all pulverizers.
Track your entire fleet of attachments and machines from one source. Pulverizers with asset tracking can be viewed within VisionLink®.
Keep your assets secure. Pulverizers with an asset tracker send an alert if they leave an easy-to-set-up site boundary.
VERSATILITY AND CONVENIENCE WITH COUPLERS
Share pulverizers and other attachments of the same size class across multiple machines by adding a quick coupler.
Significantly reduce the time it takes to switch attachments when using a quick coupler.
Quick couplers add a new level of safety to your job site with the ability to switch attachments while the operator stays in the cab with built-in redundancies to keep your attachments secure in the event of a pressure loss.
A variety of couplers are available to suit your specific needs:
Cat Pin Grabber Couplers – dedicated pin system
CW Dedicated Couplers – wedge-style, dedicated system
S Type Couplers – wedge-style, dedicated system
Hydraulic Connecting CW Couplers – hydraulic connecting version of the CW coupler with instant hydraulic capability upon connection
Hydraulic Connecting S Type Couplers – hydraulic connecting version of the S type coupler with instant hydraulic capability upon connection
Empire Southwest has acquired Cashman Equipment and is now your local Cat dealer for the Arizona, Nevada, and parts of Eastern California. Take a look at our new store fronts and discover all the solutions Empire has to offer. To learn more about this transition view our press release.
