CAT ELECTRONIC TECHNICIAN

GET TECHNICAL INFO WITH CAT ET

Caterpillar Electronic Technician (Cat ET) is diagnostic software required to communicate, diagnose and service electronically controlled Caterpillar engines and machines. When connected to an Electronic Control Module (ECM), a technician has the ability to diagnose existing and potential problems, configure the product, and obtain data for analysis. 

*NOTE: Purchase option from Empire only available for clients in Arizona and Southeastern California.

MAINTAIN PRODUCTIVITY.
CONTROL COSTS.

THE BENEFITS OF USING CAT ET INCLUDE:

  • View parameter status

  • See active diagnostics

  • Clear and view logged diagnostics

  • Perform diagnostic tests and calibrations

  • Analyze results and print reports

  • View fuel consumption, operating hours, etc.

  • HOW IT WORKS

    After you purchase a subscription from Empire, you will receive annual software updates to each user (Version A, B, C). Each computer requires a software license. Software licenses expires annually. 

    • NEXG5007)
    •  (TEPS dealers only NEXG5009)
    •  (For first time install JERD3003)
    •  (For machine diagnosis 538-5051)

    COMPUTER AND HARDWARE REQUIREMENTS

    To run the service tool, the following PC, communication hardware, and cable requirements must be met.

    The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the service tool.

     

        • PC containing a 2.0 GHz dual-core processor
        • 3GB RAM
        • 3GB of available hard disk drive
        • DVD-ROM drive
        • 15.4 inch XGA Screen (1280x1024 compatible)
        • Microsoft Windows™ 7 Professional, Windows 8 Professional and Windows 10. Note: Windows 8 RT and the Windows Phone are not supported due to the ARM processors.  The Microsoft Surface Pro is supported.
        • RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
        • USB 1.1, 2.0 or 3.0 port (for use with Comm Adapter 3)
        • Ethernet RJ45 connector
        • Built in mouse, pointing device, or touch screen
        • For security purposes, Microsoft Browsers version 11 or newer or Microsoft Edge is recommended. Note: The most recent version of Microsoft browsers may not be validated to work with the service tool.
          • PC containing a Pentium 2 GHz processor or greater
          • 1GB RAM
          • 500MB of available hard disk drive
          • CD-ROM drive
          • Super VGA monitor or display (1024x768)
          • Microsoft Windows™ 7 Professional, Windows 8 Professional or Windows 10. Note: Windows 8 RT and the Windows Phone are not supported due to the ARM processors. The Microsoft Surface Pro is supported.
          • RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
          • USB 1.1, 2.0, or 3.0 port (for use with Comm Adapter 3)
          • Ethernet RJ45 connector
          • Built in pointing device, mouse or touch screen
          • For security purposes, Microsoft Browsers version 11 or newer or Microsoft Edge is recommended. Note: The most recent version of Microsoft Browsers may not be validated to work with the service tool.
          • Wi-Fi (for the Wireless Comm Adapter 3)

          NOTE: If the entire screen is not visible, click the maximize button to fill the screen.

        PURCHASE CAT ET SUBSCRIPTION

        *NOTE: Purchase option from Empire is only available for clients in Arizona and Southeastern California.

        Call 480-633-4320 or drop us a message to get started.

        CONTACT US